Counting matching models…
Mounting your speakers on a monitor arm is a great way to keep clutter off your desk, while keeping them close to your face. Since the Audioengine A2+ doesn't come with a ¼-20 mount on the bottom, I designed this mount to allow them to…
AUDIOENGINE 2+ SPEAKER STANDS A simple and easy printable speaker stands for angeling your favorite speakers when they are a little bit lower than they should be. I designed 3 different versions, all with the same dimensions but different…
Wanted to incline the HD6 up, but the wobbly sheet metal parts were no good. This is a solid base which can be filled with sand and inclines at 9 deg. Option to use a plate of steel to close it off. A Kanto stand top plate was reused in…
I've started using gridfinity to organize my desk/workbench more. and wanted something to put my speakers on with it. Using the gridfinity bin generator in Fusion, I made a base bin, then made the angle from planes. Since my speakers are…
Introducing the Audioengine D1 DAC Snap Mount! Allows you to mount the Audioengine D1 DAC to any surface with either M4 screws or double adhesive backed tape. Intstalltion Load DAC into 3D the Audioengine D1 DAC Snap Mount. Apply some…
A low profile speaker stand for the Audio Engine A2 or A2+, which tilts each speaker upwards at a 15° or 24° angle. Can be printed without supports. Both the speaker stands available for printing on Printables as well as those available…
Use a simple drywall screw, tighten it just right and hang this on it, it should not move if you did it right, I personally use a bit of epoxy two compound glue to make sure it doesn't move.
A very simple cap for physically blocking the LED light from the audioengine a5+ speakers. Add a tiny bit of glue on the rim.
Designed this stand to fit the base of a Audioengine HD3 Speaker so its able to be placed on top of a desk mount stand. The stand I'm using is a JUSMO Camera Desk Mount Stand with 360° Ballhead:…
The internal amp on my 10-year-old Audioengine A2s gave out. Rather than trash perfectly good speakers, I converted them to passive speakers. After conversion, you're left with holes in the A2 backplate that can negatively impact sound.…
I recently moved my 10-year-old Audioengine A2s to my desk and wanted some stands. None of the models I found online leveraged the tripod (1/4"-20) mounting hole on the bottom of the speakers, so I made my own. These stands keep the…
This is a slightly scaled up volume wheel for AudioEngine A2+'s that have Micro usb in stead of the USB type B.
The original volume knob on my Audioengine speakers was volconized, becoming sticky and unpleasant to use, so I printed a new one. Instructions: Just import the file into your 3D print slicer. I used black PLA with 40% infill, but it's a…
Printed with default profiles for a Prusa Mini+ and Prusament PLA, 0.2mm layer height with 15% gyroid infill
Remix of "AudioEngine A2+ Vesa Mount" by JMY1000. I like the slight sound signature change that AudioEngine's silicone pads/stands provide so I've adjusted the original model to fit them in. If you don't have these pads print and use the…
Simple speaker stand for the Audioengine A2+ speakers. Fusion file is included if you want to modify it to your needs. Put some anti-skid stick on feet on the bottom and you're good to go. Category: Audio
Protection for Audioengine A1 Print with zero top and bottom layers. Customize infill to your liking. I used 50% Triangle infill in Cura.
Under desk mounting bracket for an Audioengine D1 USB DAC Print on edge for the best fit Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.16 Infill: 25% Filament: generic PLA Black Category: Audio
Another Audioengine A2+ Speaker Stand. This one features options for multiple angles for optimal listening experience. Print on the side for a nicer surface. Includes insets on the bottom for anti-slip rubber feet with a diameter of 10mm.
I was gift a pair of Audioengine A2+ desktop speakers. As good as they look, this speakers only sound good as desktop speakers when you sit in front of it and they are directed towards your head. Since no stand came with the boxes, I…
This is a volume knob extension for Audioengine A2+ Speakers. It may fit other Audioengine speakers. I made it to help me control the volume without having to reach all the way around the back. This works well for my home office setup.…
Easy to print Holder for the Audioengine D1 DAC. Compatible with IKEA BEKANT table. It mounts to the metal bar beneath the tabletop. Not tested with the motorized version of BEKANT.
Included are two models, an angled model and a rounded model. Printed in PLA.
These simple stands hold my Audioengine desktop speakers up at an angle to improve the listening experience. Print instructions I printed these on their side with 0.20 mm layer height, 15% infill and automatic supports. You should only…
A minimalist mount which locks the Audioengine D1 DAC on the top of CalDigit TS3 Plus dock.
Simple Audioengine 2+ speaker stand with integrated cable channel to hide the cables. Printing instructions: 0.3 draft profile used Textured sheet used Organic supports activated No brim required Fuzzy skin activated Lightning infill set…
This is a wall mount for the AudioEngine B1 with keystone. I made this to mount my into a wood panel on my sailing yacht. This Design assumes you have a cavity that the AudioEngine B1 can be installed into. This replaced an iPod dock and…
A remix of clubclays AudioEngine A2+ volume knob from ThingyVerse. I found that the original slipped on the volume knob, so I created a version that replaces the stock knob. Slide off your original knob and press this one into place.
The stands are the perfect addition to enhance your listening experience on your workspace! They are designed to fit Audio-engine A1/A2+ bookshelf speakers, optimizing the sound quality with a 15-degree
Put your speakers in the perfect listening position. Built specifically for the Audioengine A2 desktop speakers.
AudioEngine a5 knob. Print Settings Printer: Delta Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Real PLA Category: Replacement Parts
I wanted a way to see what volume my Audioengine D1 was set to. I originally printed the model truncated as a quick test piece but it fit nice and snugly and so I just kept it as-is. Printed in silk PLA w/ 0.2mm layer height.
An adapter for Audioengine A2+ speakers, to use a 1/4"-20 UNC threads as a mount point from the bottom of the speakers. 1/4"-20 UNC thread is the same that is used in camera equipment (stands etc.). It uses the two last bottom screws…
Clip on grill for the Audioengine A1/A2 series speakers. The cutouts are intended to be filled with an infill pattern with no top/bottom solid layers. 20% rectilinear infill worked well for me using PETG filament. Dimensions are tight, so…
