7 models
BOM 8× M3×14 BHCS 4× M3×8 BHCS 8× M3 heat inserts 4× 3×6 Magnet Material ABS, or ASA for best results Print Settings 0.2mm layer height, 2-3 perimeters, ~25% infill are more than enough.
i used https://www.printables.com/model/553657-siboor-voron-v0-blower-duct to be able to use this in combination with my Rainbow Matchsticks 0.2mm layer height, 3 perimeters, ~25% infill.
Due to the L-shape the clamps are a little harder to be wiggled out the 2020 extrusion, in comparison to the original
Many people replace their stock onewheel +XR battery with an aftermarket battery. This enclosure is designed to house the stock battery to keep it safe if you want to reuse it for other purposes. It uses 4-40 screws and heat inserts. It…
This mount moves the Aux feeder to the top and is mounted using the screws for the top PTFE coupler mount. I recommend replacing all the couples and PTFE with a single piece of 3mm i.D. PTFE from feeder to hotend with no couplers. To use!…
Auxiliary Fan Duct using 12032 fan, Same as the k1 / K1Max
i used https://www.printables.com/model/553657-siboor-voron-v0-blower-duct to be able to use this in combination with my Rainbow Matchsticks 0.2mm layer height, 3 perimeters, ~25% infill.
