1 / 3
SV08 Max Auxilliary Feeder top mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount moves the Aux feeder to the top
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 26
- Makes
- 0
- Views
- 309
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount moves the Aux feeder to the top and is mounted using the screws for the top PTFE coupler mount. I recommend replacing all the couples and PTFE with a single piece of 3mm i.D. PTFE from feeder to hotend with no couplers.
To use! You will need a 8" or so 4 pin extension cable. The connector is a Molex Micro-Fit 3.0 dual row connector. Buy on Amazon The wire should be what you have that is appropriate. If you have can bus cable that might be better.
Print in any material higher temp material (PLA-HT, PETG, ABS, ASA, Nylon, etc.) and at any resolution.