Counting matching models…
Compatible with propeller shields: https://www.printables.com/pl/model/867950-dji-avata-2-propeller-shields Print with PLA , and secure with cable tie. 17.5 g each Note about left and right files: They are almost identical. After putting…
Pulled and converted the 3D model of the DJI avata 2. Very suitable to make mods or take dimensions!! Non printable at this moment due to complexity
New and improved versions added Full versions are fixed! On the full versions, the ‘61’ goes to the front. On the quarters, any will fit on any corner.
Aus dem Remix von BanditFPVprints geremixt komplett umlaufend zusammengebaut mit Tinkercad. Ausdruck in TPU, Hält wie das Original auch ohne klebeband.
If you have any questions, complains, requests, or other comments, please let me know!
Compatible with bumper: https://www.printables.com/model/856904-dji-avata-2-bumpers Great for flying through the woods and using Turtle Mode on the grass. The shields look too short, but it's not a bug. It's a feature - guards stay in…
There are 6 varients, Goggles strap mount / Goggles strap mount easy print & versions with a cable tidy Belt mounts in standard and easy print (slightly wider clip.
In keeping with the frame design, a sleek solution to a problem you shouldn't have!
This is a remix of the great DJI Avata 2 bumpers from Kucici. I did make a slight modification which prevents having to use cable ties. I simply added a lip to the bottom support which allows the bumper to clip perfectly in place and is…
This is a model of the Valkyrie Shuttle from the Avatar series. It is made as a kit and does not require any glue. The model has several features: Openable roof door Movebale engine parts VTOL engines can rotate Openable back door…
This version combines Kucici's excellent DJI Avata 2 Bumpers and Propeller Guards into a single model with the addition of clips to hold them firmly in place on the DJI Avata 2. Propeller guards have also been modified to provide better…
Bumper guards for DJI Avata 2, fits in original holes but you will need 4 longer screws M1.6x10mm. Printed with PETG 100% infill, 0.15 layer, without supports.
The Avatar 2 product has a very close distance from the ground to the sensor. So I think using my foot cover will be helpful.
Earrings of all the element symbols from avatar. Print instructions Layer height doesn't matter that much. Additional earhooks needed. Have fun!
Appa whistle, generates a high pitch noise.
I made this model 9 months ago and converted it now for 3D printing. Hope you like it and IF YOU PRINT HER PLEASE POST IT! Thanks. Want to have a detailed look at the model? Here for 3D renders I printed her with a scale up of 390 percent…
Stand for the DJI Avata 2 drone. The stand allows you to connect the USB cable when the drone is on the stand
Best possible passive cooling for the Charger and Batteries due to open Frame Design. Easy to print, due to seperate Parts. Use 25 M3x6mm Countersunk head Scews to assamble the Parts. The "mid" part must be printed 3 times.
Pretty simple to print. 0.2mm layer height and I do three walls. You can mount it to the camera with screws (if you have some small enough) or glue. I prefer using glue and I haven't had any issues with it yet. I've printed it in TPU,…
This is a general purpose linear servo actuator (pusher style). Two sizes have been designed, for different space constraints and force outputs. These use continuous rotation servos which helps keep the cost very low. Off the shelf…
Ich habe eine Hartschale für die DJI Avata 2 entworfen. Grund dafür ist der sichere Transport speziell bei Reisen mit Koffer. In der originalen DJI Tasche oder ähnlichen Soft-Taschen ist die Avata 2 vor keinem Kofferband und Gepäckwerfer…
This crown was originally meant to be worn by the crown prince of the Fire Nation. In his youth, Prince Sozin gifted this to Avatar Roku as a symbol of their friendship before Roku went off to master the other three elements. Eventually…
Printed flat down with supports
Print the parts flat, without support. I printed theml with PET plastic bottle filament : https://hackaday.io/project/185196-pullstruder-from-plastic-bottle-to-pet-filament But should work with PETG but PET is stronger. When printed bend…
This is a customizable Avatar-inspired keychain designed for easy and high-quality 3D printing. The model features bold, clean geometry and smooth surfaces, making it suitable for both single-color and multi-color prints. Multi-color…
A simple battery holder for goggles V2. Holds very well in place, ultra light If needed, to get better clip, you can warm it into hot water and bend slightly the clip. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No…
Quick, fun print for a kid or someone who likes the avatar or gliders. Less than 30 min print time! Ik it looks silly with the front that way but I wanted it to be fully 3d printed. Make sure you have a good first layer! -90% infill (this…
There are many battery holders for the DJI goggle 2, but I always had the problem that the weight of the battery caused the strap to press hard on my ears. This additional strap holds the goggles in place and distributes the weight. You…
Hello, I made Momo and Appa keychains I've made them using lithophane sight named 3DP rocks then I cut the model placed the background, and printed it. In order to print it in two colors you can have either a multicolor printer or a…
This is a remix of a great looking model of Appa from Avatar the Last Airbender by Alpha3dPrint . The original file wasn't able to print so I had to repair it in meshmixer prior to printing and I figured while I'm at it, let's make Appa…
The token can be used in the board game Settlers of Catan. The design is inspired from the royal palace of the Northern Water Tribe. Transparent filament is used to give an ice sculpture look. Other tokens from Avatar Catan can be found…
Just a basic cover to protect the lenses and infrared sensor. Print in TPU with 10-20% infill.
Oel ngati kameie! In the middle of Christmas shopping, I've been working my txìm off trying to make some models for this month. Today marks the release date of Avatar: the Way of Water. It's a movie I've been anticipating for quite some…
This strap holds the battery in for the DJI Avata drone when subjected to heavy crashes, preventing battery ejection. This will allow the drone to remain powered and attempts to find the lost drone easier by continuing to broadcast…
Multi piece tealight holder for "standard" small candles (~4cm radius). Pieces can be stuck together but I recommend glueing them to make a full top part. Cap part is optional, circle gap in the middle avoids possible deformation by heat…
The token can be used in the board game Settlers of Catan. The design is inspired from the Avatar Temple in Earth Kingdom. Dark Green filament is used to match the uniform design. Other tokens from Avatar Catan can be found here Print…
The token can be used in the board game Settlers of Catan. The design is inspired from the General Fong's fortress in western Earth Kingdom. Dark Green filament is used to match the uniform design. Other tokens from Avatar Catan can be…
I modified the original mount by removing the part with the 1/4" thread and added GoPro-style mounts on both the top and bottom of the Avata 2. I also made a small clip that fits into the unused GoPro-style mount, allowing you to use…
A small collection of five coasters (Fire, Earth, Air, Water, and the White Lotus) with a coaster holder that has a multi-color design of Raava and Vaatu embedded without the use of an MMU or Palette! Designs are based on art from Avatar:…
The token can be used in the board game Settlers of Catan. The design is inspired from the sentry outpost from Fire Nation infantry. Red filament is used to give a fiery look. Other tokens from Avatar Catan can be found here Print…
The token can be used in the board game Settlers of Catan. The design is inspired from the air temple on the Air Temple Island. Silk Gold filament is used to match the air nomad clothes design. Other tokens from Avatar Catan can be found…
The token can be used in the board game Settlers of Catan. The design is inspired from the imperial palace in the Fire Nation capital. Red filament is used to give a fiery look. Other tokens from Avatar Catan can be found here Print…
🔥 Inspired by ATLA, a wearable prop that is easy to print! 🎎🏮 I am a fan of Avatar: The Last Airbender, and many years ago I published the simple crown from the animated series. Since the recent Netflix live action show, I decided to…
UPDATED 3/13/2024: Verified VTX shell dimensions. Uploaded f3d option. ND Filter may need slight tolerance adjustment (or my 3d printer needs calibration...)
GLUE REQUIRED! NO SUPPORTS OR SANDING NEEDED! Currently, I think this is the best model of Sokka’s Boomerang available here. (At least for print beds the size of the MK3 or MK4). If you want a dual color print but don’t have a dual color…
🐾 3D Printing Tips for Your Aang Figurine ✅ Recommended Settings: Layer Height: 0.1 - 0.2mm (Fine enough to capture Aang’s iconic arrow and robe details). Infill: 15–20% (We want Aang to be light and lively, not overstuffed like a…
The token can be used in the board game Settlers of Catan. The design is inspired from the temples in the Eastern Air Temple. Silk Gold filament is used to match the air nomad clothes design. Other tokens from Avatar Catan can be found…
Hairpiece worn by Princess Azula and Prince Zuko. In S2 Princess Azula is seen wearing a red hairpiece with a gold strap. In other parts of the series, both the royal siblings are seen with gold hair pieces held in place with a red band…
The token can be used in the board game Settlers of Catan. The design is inspired from houses of the Southern Water Tribe. Transparent filament is used to give an ice sculpture look. Other tokens from Avatar Catan can be found here Print…
Multiple variants available. I recommend scaling up as much as you can as the tail on the default logo is very thin. If you are unable to do this due to print bed limitations I have included modified versions that should be easier to…
the size of the nubs or holes could be slightly of for your printer. i changed them to be 0.2 mm larger. Suggested to print slow (1mm/s z speed) because the props are thin and can flex during printing.
This is a Contour Map of the Avatar: The Last Airbender world that I converted into a 3D print. Each of the continents are super-glued into the correct place on the base-ocean File sizes are made for my Ender 3 but you should be able to…
This is a "closed" guard rail for the DJI Avata - which I made in 2022. Recommended for close proximity flying. Weight: All corners: 28 g (4x7g) Front only: 14 g (2x7g) Recommended material: Flex (tested: Flexfill TPU 98A, Filaflex40) the…
Benchy as an Avatar style helicopter with spinning blades. It is a little shorter and wider than the standard Benchy. No supports required when printing. .stl & .3mf files available. Assembly: Firstly, fit prop blades using the screws to…
Mount a camera like the Insta360 X3 to the underside of the Avata2. Designed to take a 1/4"-20 1/2" hex head screw. I printed mine in PLA+, 2 perimeters, 10% cubic infill, and 3 top and bottom layers. The entire assembly, including a…
Made by tracing an image of the element symbols to an SVG design (also included in files). The SVGs were extruded and combined with PrusaSlicer, so the meshes are a little chaotic but they print nicely.
DJI Avata 2 case with enough clearance to fit the gimbal bumper by IPCreative.
Avatar the last Airbender - Earth Kingdom Coin One sided - 1.25" in diameter - Ironing enabled. No supports needed. Coin stand created by: zen13 - https://www.thingiverse.com/thing:193233
A new 3D figurine generated by AI, a Chibi Na'Vi (Avatar). Sorry for the print, had a filament problem I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly…
Just a simple Avatar the Last Airbender wall art design. I printed it out the maximum size my printer allowed. Scale in your slicer and make sure The Z scale makes it the thickness you want. I used bluetak/sticky take to mount them. I…
This is the head piece of Azula from Avatar: The Last Airbender It is made to be used directly on the hair/wig. Model is already oriented to be printed as is. Feel free to visit our website/instagram for more cosplay props 3D models and…
This is a pendant based on the Necklace worn by Monk Gyatso in Avatar the Last Airbender. The pendent prints on it's back. Two "holder" pieces are printed separately and are glued on. The holder pieces allow sting to be tied to the…
fits the following Walksnail Avatar Caddx cameras with 14mm camera lens body Walksnail Avatar HD Nano Camera V3 Walksnail Avatar HD Mini 1s Lite Camera Walksnail Avatar HD Micro Camera Walksnail Avatar HD Pro Camera Walksnail Avatar HD…
DJI Avata 2 Drone case I left a little bit of room inside the case to add some bits of foam. I specifically added some to the sides where the prop cage will touch the case, and at the front where the gimbal guard will touch the case. With…
Prepare to watch the upcoming release of Netflix's Avatar: The Last Airbender with these bookmarks. Water Tribe, Earth Kingdom, Fire Nation, Air Nomads: pick your favorite, or print all four.
Detailed blue alien female figurine inspired by the iconic Na’vi aesthetic from the Avatar universe.
Replacement upper cover for the DJI Avata's GPS module. Requirements: 0.25mm nozzle required Very small features that interface with clips that will not print with standard nozzle. Soldering iron or similar Clear piece for LED uses…
A collection of the 4 elements from Avatar the Last Airbender as keychains! If you want any others or any changes let me know and I can make them! These can be a bit of a pain to print all together even with an AMS/similar device because…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A quick-release go-pro mount for the DJI Avata. We printed ABS with 3 perimeters and 15% infill on the Prusa Mini, which seems to hold up well to being attached/detached. If we reprint, we'll likely increase the perimeter count. To…
An antenna mount for TBS Source One V5 Printed in TPU95A with supports
This is a solid platform for mounting your Walksnail hd Avatar VTX kit to Sonicmodel AR wing 900. Fits perfectly nose for session camera. Just use a couple of drops of UHU Por to glue it to EPP. I strongly suggest to print it from at…
Matsya is an avatar or incarnation of Hindu deity Vishnu. It is the first of ten avatars of Vishnu. Matsya is said to be the avatar that rescued the first man, as well as other creatures of the earth, from a great flood. Matsya is said to…
The crown of the Fire Lord. Seen worn by Sozin, Azulon, Ozai, Zuko, and Izumi. The topknot band changes color depending on who is wearing the crown. The coronation version does not have a band that goes around the top knot. The hairpins…
Coaster set based on Uncle Iroh's tea house "The Jasmine Dragon" and the White Lotus group. Note: The Tea house Window v2 should fit in the coaster holder with no issue however I haven't had a chance to test it yet. Reach out for any…
DJI Avata landing feets I need more space between ground and the avata, so i created this landing feets. i printed it wit PETG https://amzn.to/3TztjKk If u want a more special one u can take a look here…
This is a 3D printed DJI Avata Battery protection case for 3 and 4 batteries, printing with no support materials. Designed for holding up to 3 and 4 DJI Avata batteries, the batteries will hold themselves in place, no strap is needed.…
Elegant Na’vi-inspired female character from the Avatar universe, featuring flowing garments, delicate facial details.
Varaha may be depicted as completely a boar or in an anthropomorphic form, with a boar's head and the human body. Depicted here holding an iron-club, a conch, a discus, a sword, a javelin in his hands and making the abhayamudra (hand…
Revamped for better printability and assembly. separated blade and handle (they now connect with a tang like a real sword) added varaiations of the print for different sized printers The files are organized by various printer sizes. Print…
An Walksnail Avatar antenna mount for TBS source one v5 drone frame
modelos de los simbolos de las cuatro naciones de la serie AVATAR + el simbolo de la flor del loto blanco
Lightweight and low profile version of an all in one Walksnail Avatar VTX mount. Camera can be adjusted up and down. VTX mounts with screws provided with VTX using the 20x20mm mounting points. Use 3mm screws to mount the pod, or…
I reuploaded the models to printables since most people are using printables or thingiverse. All credits to CaddxFPV and Walksnail
DJI Avata 2 bag - propellers and accessories case Hard case for 2 pairs of spare propellers, bundled prop screws, and hex key. There are additional compartments for other accessories.
Model of glider which Aang used in the series Avatar: The Last Airbender . File .3mf is set with ironing of all upper layers too with a first layer.
Fly high with the lovable sky bison! This Appa figure sits on a 'Yip Yip!' cloud base, capturing his gentle giant personality. A must-have for every Avatar fan. 💙 Enjoying the Freebies? I love bringing these concepts to life and sharing…
This entire project is 5 parts, a tile of each of the 4 nations and a frame to place the tiles in a grid. The tiles will fit into the grid and stay without help, but using something like super glue is recommended to make it more secure.…
Jake Sully from the movie Avatar
DJI AVATA 2 Props Guard box It fits DJI Avata 2 propellers case, useable for me and I hope for you too __________________ If you add this to your collection or download it, please click the LIKE . You can earn some Prusameters if you'll…
Suki's headpiece as it appears in the Netflix Avatar the Last Airbender series. The model can be printed intact or separately in 3 pieces. Be sure to scale the headband to fit better. Alternatively, you can shrink the headband and cut out…
![Airbender necklace [Avatar the Last Airbender]](https://media.printables.com/media/prints/111157/images/1095404_84f9e2e7-8874-4ab8-bc27-9124d746213a/large_display_imgonline-com-ua-compresstosize-z4l.jpg)
