Counting matching models…
This is a replacement frame for Rayban Aviator lenses (in case your original frame has been damaged). Filament (1.75mm) is used as pin for the hinge. You can use hot water or a heat gun (with caution) if you cannot insert the lenses. The…
My wife recently got a Jeep Willis, and now she's on the Ducks in the Jeep train… So I thought I would make a few custom ducks for here. Here is one of the first ones to come out. The Aviator Duck. I printed this at 0.1 mm with 5% infill,…
This model is compatible with the lego system.
Fasten your seatbelts – this Highland cow is cleared for take-off! With vintage pilot goggles, a dashing jacket, and its signature fluffy charm, this little aviator is ready to soar straight into your heart. Perfect for aviation fans,…
Quick Facts Design: Custom-designed Aviators specifically sized for Labubu dolls with a snug, secure fit . Speed: Quick print that completes in approximately 28 minutes . Quality: Optimized with variable layer height for high detail where…
This model is compatible with the lego system.
A chin mount made over a 3d scanned model. Requires adhesive tape or another type of adhesive (glue or whatever). prints without support Before applying the tape check the fitting, you might want to file some areas slightly.
Side shield for RayBan Aviator glass Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: Doesn't Matter Supports: No Resolution: 0.15 Infill: Infill>40 Filament: Plastic ABS Category: 3D Printer Accessories
Aviator Wallet AirTag Cash Clip
No print supports needed. Enjoy!
Aviator style solar eclipse viewing glasses. Remixed from this model: https://www.printables.com/model/7626-aviator-sunglasses I printed in PLA and used PETG as support material for clean breakaway. Layer height: 0.12mm or finer Must use…
It prints perfectly fine without supports.
A model of a pair of aviator sunglasses as a cookie cutter for the Cookie Cutter Competition!
Add some retro flair to your workspace with this unique pen holder modeled after a classic Aviator Bomber Jacket! This isn't just a desk organizer; it’s a statement piece. Inspired by iconic flight jackets, this model features realistic…
This is a set of replacement frames for avaitor-style red-cyan 3d glasses, marked ‘anachrome.com’ on the side. I could not use the stock frames over my glasses, so I modeled these after a couple of other oversized frames that I had. A…
Tray for Aviator slide wallet. 4.3mm inside tray depth, 5.8mm overall thickness. Fusion 360 file included, change the ‘fullheight’ parameter to change thickness/tray depth. Printed bottom of tray to build plate requires a small amount of…
Rayban's cases are famous for being too fragile. This case aims to replace them in a form factor suitable to be carried inside a trouser's pocket. New version intended to be printed fully in TPU
This is a model of the House of Avitors 'The Centipede', a building in Moscow stading on 40 pillars (or "legs"). The model is constructed mostly from photos, it's not 100% accurate but still quite close to reality. Russian Wikipedia…
I'm not entirely sure how it's called, but it's a rod that goes into the spiral part of your keyboard cable. I made it hollow inside, so you can either add weight to it (like putting big screw, metal ball bearings, sand or whatever you…
Protects the surface of your Aviator wallet when unscrewing the coverplates
A rod for a Keychron aviator cable
This Coin holder holds 4 x £1 and also has a small slot for holding other little bits and bobs like a sim tool. The main reason I designed this was to stop coins rattling around while I walked. The coins protrude slightly higher than the…
This is just a simple holder, it was originally going to be slightly more complicated and hold the glasses at the bridge as well hence the triangular shape, but I found that it worked just fine only holding the arms. This isn't all that…
Takes about 3 hours to print on the Ender 3 S1.
This is an insert for the Aviator Wallet which holds an Apple AirTag + 8 Euro Coins (2x 2€, 2x 1€, 1x 50c, 1x 20c, 2x 10c) inside. This model was remixed by 2 fantastic models, one directly from printables and one from cults. Both…
This model is compatible with the lego system.
The bottom connects perfectly with Duplo pieces.
Modified the original design to create a solid wing for strength and stability. Although original design was for Ridge Wallet, this design also works great on Aviator Wallets (see photos).
Get ready for takeoff with this adorable aviator bear! Dressed in a classic vintage pilot helmet, detailed flight goggles, and a cozy scarf, this charming little bear captures the adventurous spirit of early aviation. With its cute…
I printed this in TPU but it may work with other materials as well.
Edit: 2022-03-28: Created a v2 that's a bit thicker and has an additional passthrough for a GX16 connector. It turns out this last connector is actually in the way of the PCIe horizontal bar, and should be raised about 10-15mm or so…
This design combines features from two duck models and joins them to our reusable keycap base. The base’s switch socket, fit dimensions and internal reinforcing ribs are preserved. The original base worked well in my son’s testing. This…
This is a radio knob for the 2005 Lincoln Aviator.
I recreated the sunroof switch from my 2005 Lincoln Aviator. My switch had broken hinge clips. The only difference with this version is the bottom is flat.
Bring the jungle to your printer with the Tropical Aviators ! This set features two distinct parrot designs, each optimized for vibrant, multi-color printing and realistic wing-spread movement. Features: 🦜 Dual Design Set: Two unique…
Bring the jungle to your printer with the Tropical Aviators ! This set features two distinct parrot designs, each optimized for vibrant, multi-color printing and realistic wing-spread movement. Features: 🦜 Dual Design Set: Two unique…
This model is compatible with the lego system.
Bring the jungle to your printer with the Tropical Aviators ! This set features two distinct parrot designs, each optimized for vibrant, multi-color printing and realistic wing-spread movement. Features: 🦜 Dual Design Set: Two unique…
Bring the jungle to your printer with the Tropical Aviators ! This set features two distinct parrot designs, each optimized for vibrant, multi-color printing and realistic wing-spread movement. Features: 🦜 Dual Design Set: Two unique…
A stylized tortoise aviator in steampunk inspired attire. The model is composed of the tortoise model and a base. The tortoise can be printed without the base, but it's more stable with it. Pictures are of a print with a 0.4mm nozzle at…
I printed w/ no support in PLA. TPU would be ideal but I didn't have any on hand.
Sturdy fitted case for rayban aviator rb3025 sun glasses. Finished with acetone vapors. Laser cut felt inlays. (Cut cutout.dxf once with and once without the nose bridge support and "glue" it in the case with some acetone.) 25mm wide…
Improvements: Made the elastic band holder sturdier, and added an opening so I can add the elastic band without having to cut it when moving it from a previous iteration. Made the cutout area bigger to have more space for the earpieces.…
