Miniature Aviators - Fits Labubu - Quick - Snug Fit - Optional Supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Miniature Aviators designed for Labubu. Fast 25 minutes. Easy to remove supports. PLA tested and optimized for quality.
- Rating
- 4.5 / 5
- Likes
- 47
- Downloads
- 269
- Makes
- 2
- Views
- 564
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Quick Facts
Design: Custom-designed Aviators specifically sized for Labubu dolls with a snug, secure fit.
Speed: Quick print that completes in approximately 28 minutes.
Quality: Optimized with variable layer height for high detail where it counts.
Printability: Uses minimal supports that are designed to be easy to remove.
Printing Specs
With Supports (Recommended)
Print Specifications
Specification | Value |
|---|---|
Estimated Print Time | 28 Minutes |
Filament Used | 2.1 g |
Layer Height | 0.08 mm |
Wall Thickness | 1 perimeters |
Infill Density | 15% |
Supports Required | Yes |
Adaptive Layer Height | Enabled |
Nozzle Diameter | 0.40 mm |
Settings Used
This Print: PLA • 1.75mm • 205°C Nozzle • 55°C Bed
Print Notes
Optimized for Ender 3 V2 with BLTouch bed leveling
Uses off-print purge line to prevent nozzle blobs
Exported from PrusaSlicer
⚠ Adjust temperatures +/-5C if experiencing adhesion or stringing issues
Recommended: Test on a small print first before large jobs
Without Supports
Print Specifications
Specification | Value |
|---|---|
Estimated Print Time | 23 Minutes |
Filament Used | 1.9 g |
Layer Height | 0.08 mm |
Wall Thickness | 1 perimeters |
Infill Density | 15% |
Supports Required | Yes |
Adaptive Layer Height | Enabled |
Nozzle Diameter | 0.40 mm |
Settings Used
This Print: PLA • 1.75mm • 205°C Nozzle • 55°C Bed
Print Notes
Optimized for Ender 3 V2 with BLTouch bed leveling
Uses off-print purge line to prevent nozzle blobs
Exported from PrusaSlicer
⚠ Adjust temperatures +/-5C if experiencing adhesion or stringing issues
Recommended: Test on a small print first before large jobs