172 models
Havis console mounting Motorola APX-8500 Mobile Remote Head Mount UPDATED POST size requested per @SeanOConnor_5174100 I modified the 3" deep version to 2.5". I have not printed it, but it should work fine. The 2.5" version is named with…
Print approx. €6.32–€7.73 excl. taxPreliminary estimate for one variant
For reasons that I will never understand, the Gravis Gamepad Pro came with an accessory joystick shaft which screwed into the d-pad to turn it in to a tiny, uncomfortable joystick. To make matters worse, without this shaft attached, there…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant
Here is the Astroworld head, double-sided! I printed this head both times using “everywhere” supports in PrusaSlicer. It was very difficult to remove the support material without damaging the pieces of Travis's hair, so I recommend…
Travis model was taken from the game and processed to be printable in Blender. For the VBuck base I used Olo Deepdelver's model → https://www.printables.com/model/192508-fortnite-vbuck-3-color-remix-no-mmu ←
The source marked this model as adult content.
Original model was flat and for multicolor printers only, and I wanted to print this from my single color printer. So I commissioned @hardik5640 on Fiverr to make a version that would be readable on a single color printer! Enjoy having a…
Om dat mijn zoon last heeft van de Aziatische hoornaar liet hij mij een Aziatische hoornaars val zien met wat uitleg. Zo ben ik dan begonnen met te tekenen, en printen. De val kan maar begin volgend jaar getest worden. De aanvallen…
A dummy chassis for you Savi's Workshop lightsaber parts. Category: Props
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Cactus Jack Logo Plague
Darth Malgus parts for your Savi's Workshop lightsaber. Category: Props
A custom emitter for you Savi's Workshop lightsaber. Category: Props
This gives you a functional base from which to completely design your own Savi's Workshop lightsaber parts. You can import the STEP file into Fusion 360 for easy customization. Category: Props
UTOPIA Travis Scott Keychain
A custom emitter for you Savi's Workshop lightsaber. Category: Props
“We’ll get cars and like, we’ll get jobs, and we’ll have to like, mow lawns and scrub the grill, but we’re never gonna score ever! It’s gonna suck!” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4…
Newer style Fender vents to suit the front guards of a Mazda MX-5 Miata. I've fit them to my 2001 NB, but they should hopefully fit an NA (although the fender shape is different) Designed with aero in mind, to reduce wheel well pressure.…
Hi! This is a press-fit gear for the m0.4 80t Panavision Iris gear to regular m0.8 60t ARRI standard gear. How many times have you found yourself on a Panavision job, with a lens package that has mixed PV and standard iris gearing?…
Harley Davison Monster Wall Art
This is an adapter plate used to attach the 3D Printed Beavis Racing sequential shifter and a handbrake to the small mount included on GT Omega brand sim rig frames. This plate will likely work for a variety of other cheap sim racing rigs…
Simple keychain scalable
This is a replacement part for the rain gauge cone on the Davis Vantage Pro/2 weather station. It prevents debris from entering the rain gauge and potentially blocking the rain gauge. It sits directly on the bottom of the cone and can be…
Exaggerated caricature-style miniature of Travis Scott. Designed in a bold, expressive style with oversized features and simplified chunky details, making it paint-ready and optimized for 3D printing
This bracket can mount the IC-706 series of radio into a havis public safety type console The radio mounting screws are countersunk M4x0.7 - 8mm depth I highly recommend printing this in Nylon (PA) if you are planning on using it in a…
A cookie cutter in the form of a G-clef. Easy to print, no support needed. I use the following recipe for the dough: https://www.chefkoch.de/rezepte/899741195381381/RRs-unverwuestliche-Ausstech-Plaetzchen.html (not from me ;-) )
You need glue and some parts need force or a bit of cleaning. I look forward to your prints. Potřebujete lepidlo a na některé části je potřeba použít sílu nebo je trochu očistit. Těším se na vaše výtisky.
Same thing as the original, just with the bolt pattern for the DIY Sequential Shifter bbeavis. Category: Video Games
These are 3D scans of the Eggheads from UC Davis. The scans were done using Polycam on an iPhone.
Messing around with some programs and made these.
This is model is designed to be printed with a Bambu Lab AMS or similar. I recommend printing with a .2mm nozzle at .14mm layer height. The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with…
A press fit wheel to help spin your Panavise Jr jaw screw a little faster. Should seat snugly with a little pressure, no fasteners, snaps, or glue required! Print instructions Category: Tools Summary A press fit wheel to help spin your…
Pictured Example printed on a BambuLab X1C (Textured PEI) Print Settings: Initial Layer Line Width: 0.4mm Wall Generator: Arachne Wall Loops: 1 Bottom Surface Pattern: Hilbert Curve Infill: 15% (Gyroid) Initial Layer Speed: 30mm/s…
Mazda MX-5 Miata Fender Vent V3 by BEAVIS Suits NB generation MX-5 I've fit them to my 2001 NB, but they should hopefully fit an NA (although the fender shape is different) Designed with aero in mind, to reduce wheel well pressure - but I…
Beavis and Butthead Film / Cinema room sign, Colours can be altered to whatever you prefer through your AMS (Bambu) or through you current printers configuration. Large Measurements approx.: 22cm x 7.5cm x 2cm Medium Measurements approx.:…
This is a 3D scan of the Mrak Hall Egghead from UC Davis. The scan was done using a Canon mirrorless camera and Mushroom. There are 3 STL files: Main egghead scan Mini version of the egghead Egghead modified to work as a pencil holder…
This is a wonderful project which was really well studied and prepared by Adamow. As actually more and more people have largest print bed, I did remix the walls and floors to make them in one shoot (minimal print bed = 300mm). We go from…
Made these to replace some old beat up pads. They fit right in and they should be able to hold things a bit better than the originals. 2 1/2in wide. Print with a 100% infill for best results. it shouldn't need any supports either. Print…
This is a Cactus Jack model for print
beavis and butthead, do you even lift bro...? Category: 2D Art
I recently got a Panavise and saw some helping hands attachments, but they were more than I wanted to spend so I designed my own. For the arms I bought 10 flexible arms for about $5 at…
The original metal “jaws” my Panavise came with are not properly straight, so the vise would always be closed at the bottom and open at the top. Also the rubber that goes over the metal paddles is not really suited for properly gripping…
This is a Speed Wheel for a Panavise Jr. I recreated the wheel and added retention nubs to it. I found that the one sold by Panavise would occasionally fall off if you're spinning quickly. This one has a tight fit and won't come off until…
This 4x4 Gridfinity plate is for mounting the Original Panavise Base Model 300 and the low profile Panavise Base Model 305. The 2 threaded holes are for the Loc Line hose connectors with a 1/2in NPT pipe thread. Not tested with Generic…
a realistic photo of Travis Scott for your 3d printer
Designed this active fan kit for the Vantage Pro 2. Try printing the parts without support, worked for me. Additional parts required: 3x M4/M5x100 screws 3x M4/M5 nut 2x Distance/standoff bolts M3x30 (or use Abstand_25mm.stl) 1x 1767 12V…
some extra parts and modified parts
Use M3x8mm screws to replace the factory screws that holds the head unit and crash bars in place. you must remove the crash bars to use this bracket. Remove the head unit and install the base first from the rear of the bracket then slide…
These are replacement pads for the Panavise 303 vise. It has groves to hold tubular objects. I've printed it in semi-flexible filament, but works fine printed in PLA. Support is not needed if printed with groves on top. An infill of 20%…
Update 12/11/19: Updated files all over the place with updated naming to account for sizes. All versions now have 12 holes meant to be tapped out to 1/4NPT to mount coolant tubes for helping hands, eliminating the need for stacking…
The PVSolderFingersRemix file is a combining of designs by Anthsorr and sanricstu, resulting in a pair of wide jaws with soldering fingers that can be slipped over the standard jaws of a Panavise 301 vise head. The second file…
Vintage Video Games - No More Heroes - Travis Touchdown - 2008 3D printable model.
Designed this so I could move the rear lights from the stock location to accommodate the fitting of saddle bags without Interference, bolts to back of number plate bracket. printed with ABS
Enantiornithine bird from the Hell Creek Formation of Maastrichtian North America.
I created my own model of Pavise Shield 1:10 for everyone, who need a Pavise Shield to many purposes. I created my model mainly for education to school like school supplies or decoration, cosplay, modeling or board games purposes :-) A…
Davis, for all its expensive glory, decided to cheap out on the hundreds-of-dollars console with a stupid afterthought kickstand. Replacements are available, but they end up being like over $30 shipped, for a ridiculous flimsy piece of…
Model made with reference to Soco! Mascot of the couple of friends who travel through South America and show a little about their experiences along the way on the YouTube channel and Instagram @nossavisaodomundo Modelo feito com a…
Díl na přečerpávač kondenzátu. Výstup čerpadla "Plavis 011-C (2544141)" díl "Non-return valve Plavis-C VP." tisknuto 0,3 vrstvou fast z PLA děláno podle originálu akorát spodní část jsem změnil na kruhovou aby to lépe sedělo v čerpadle. A…
My wife remodeled her craft room and wanted to mount her Echo dot to her Ikea Peg board (Skavis). This is one of my first models so its a little rough around the edges, but it works as expected. Print instructions Printer brand: Prusa…
Davis and Sanford quick release plate. Has 0.79mm (roughly 1/32nd of an inch) indentations on the top to allow for adding 1/16 inch rubber (or similar) pads to help prevent camera twisting, leaving approx 1/32nd of an inch sitting above…
This is a replacement carpet clip used in the Chevy Traverse (and probably most other GMC cars) to hold carpet in place. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/847bPNQVIbb Print instructions…
1:1 Scale Oculudentavis sculpture. recommend printing it at a finer layer height or with a resin printer. The files are pretty large, they may take a while to load. (I know that this creature is heavily debated between being a bird or…
Slip on jaws for Panavise Jr. Useful for holding larger items such as connectors etc for soldering. Category: Parts
A base with trays for the Panavise Junior Vise
100x160mm signs, featuring Beavis in CornHolio avatar. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also see the Shadowbox…
Panavise Fixturing Head designed to fit Panavise 300 series bases including early models manufactured by Colbert and Hunter Industries. Slots are desired to particularly fit ¼” carriage bolts but any ¼”, or equivalent metric screw/bolt…
I had made the Beavis Motorsport Sequential Shifter and I could not used the pre-drill holes found in the Shifter Support plate. so I made this simple adapter for mounting the shifter.
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
Transform your space with this incredibly detailed 3D printable figurine that captures every iconic feature in stunning detail! This perfectly crafted STL model showcases the unmistakable character design, complete with signature styling…
Ring for the Panavise Parts Tray Base, PV-312. Add a few flexible coolant hoses and a couple alligator clips and your panavise base becomes twice as useful. How I Designed This Designed in Autodesk Fusion360. Category: Electronics
In Sodor Fallout during chapter July 9th, 1973. two diesel locomotives arrived at tidmouth sheds, one being Mavis who had cracked windows, bullet holes over, a bloody front cowcatcher, and a shield made from a 3 plank wagon. similar to…
contravisera para chevy y tornado
A replacement vise jaw with a centering feature for the PanaVise model 301. Print 2 at 100% infill.
Panavise helping hand using lock-line parts Instructions will add full build list soon Category: Electronics
A wall mount (more of a storage cradle) for the Panavise equipped with the 312 Tray Base. The design should not interfere with any helping hands on the edges of the tray, but this has not been tested. Print instructions Category: Tool…
Bring the iconic MTV troublemaker to life with this incredibly detailed 3D printable figurine that captures every rebellious detail in stunning STL format! This perfectly scaled cartoon statue showcases the unmistakable spiky hair and…
This adapter installs by removing the clevis pins attached to the jib furler and the hardware that comes with the Davis Telo-Cat. Allows for the Telo-Cat to be easily removed when not in use.
The model suffers from some floating volumes that need to be removed (basically, the space ship was drawn next to the station, so it ended up in the generated model)
I had a panalock 350 that wasn't usable in its current state for locksport. Did some measurements a few revisions and here we go, a no longer unusable vise for lockpick practice. Pick responsibly. Revision Holds Locks properly and…
These replacement jaw pads include soldering fingers, turning your already precisely positionable PanaVise into helping hands. Best used when soldering two wires together. Print with 100% infill. Works well with PLA, but higher temp…
Added a ball joint to attach a ball and socket arm.
J'ai fais un modèle simple du logo Utopia très facile à imprimer pour tous les fans de Travis Scott.
Been looking for a use for a nice chunk of aluminum, while at the same time wondering how to address the limitations of my Panavise Jr's suction cup. Voila! I've found the suction cup only works well on clean smooth surfaces, so I had to…
I made the mini thirteen jointed figure into a Soap inspired Ugandan Knuckles. This is just the base figure with the armored parts attached, however its significantly smaller having no knees or elbow joints. it sports a modified chest,…
This low-profile phone holder fits iPhone 8 & iPhone 7 phones using the Otterbox Defender case. Full access to the data/charge port while docked. The screw holes are spaced for the Panavise InDash series vehicle mounts. Print instructions…
Remixed with 1/8 BPTS holes, as the coolant lines I got had that threading instead of the 1/4PT that the original model had. Printed in PLA at 0.2 layer height, threads work fine, a little tight.
1:1 and 1:8 scale model of a brodavis. The model features detailed feather texturing along the model. I recommend printing it at a finer layer height or with a resin printer. The files are pretty large, they may take a while to load. 1:1…
The stock cover of the Endorfy Navis F240 AiO is gigantic and makes routing the tubes very hard, especcially when working in a tight space. Initially I just took of the stock cover but didn't feel so good with the bare electronics, so I…
Wall mount for storing a PanaVise Base Tray 312. Base and cover are printed seperately and joined with super glue. Mounting holes can be accessed through the front vent holes.
This was loosely inspired by a 4x4 Gridfinity Panavise mount that I saw here , but I have a PV Jr. , and I figured that I could get it in 3x3. I also wanted a home for the control wheel , which I kept losing. Also inspired from that, I…
