Counting matching models…
This is the fan art of B01-Tactical armor from Helldivers2. The item is a .stl file for a chibi character, designed for 3d printing. Feel free to edit and use it as you wish. Also check out the mechs you can sit the little guy in! EXO-45…
Why My Well MB01 came with a 26mm CW threaded outer barrel, and while adapters to the more common 14mm CCW airsoft flash hiders do exist, they usually cost around 10-15 bucks+ shipping. Features Pre-modeled threads. The thread pitch on…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Welcome! Your MIN journey has begun! I was super excited when Rolohaun released his micro delta MIN, Obviously I had to make a few changes to satisfy my desire for compact mini machines! Have a look at the original MIN If you like what I…
This model is compatible with the lego system.
Welcome! Your MIN journey has begun! I was super excited when Rolohaun released his micro delta MIN, Obviously I had to make a few changes to satisfy my desire for compact mini machines! (The aluminium Bed Plate is custom, if there is…
This model is compatible with the lego system.
This model is compatible with the lego system.
These are the Case with I/O slot cover for the JetsonNano 1st/B01/2GB. It can be fitted with a fan. The SD card is not allowed to fall into the gap. JetsonNano Case for JetsonNano 1st JetsonNano_Case_Case_Top_A is Top Case with Top I/O…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
A replacement fan for the Ryobi PSBLB01 compact blower. Printed in PETG with 0.25 nozzle on MK4 @ 0.10 layer height, drill out hole Homelite part# 551631001 Added thicker walled version for 0.4mm nozzle with and without hole PETG, 4…
I wanted a basic cover to put over my batteries when not in use as I do not like to store them in the tool. Made in openscad. Tried to over engineer it and ended up going back to some basics. This should fit the battery snugly, but not be…
This model is compatible with the lego system.
Sizing edit of @Draco_295340 's deburring tool case. Includes an inset debossed label. Recommended to print in PETG. Example photos are in PLA, debossed label filled in with sharpie (lol). If you do print in PLA, make sure to snap fit the…
Orion Fan OD4010-24HB01A with tachometer. Frame dimension is accurate since it is a 3D model from manufacturer.
Barrett cal .50 rifle muzzle brake for L96 WELL MB01 airsoft guns. I recommend printing from PETG. The thread is P M24X1.5 This is only an imitation for an airsoft gun
You can use these pads if you don't have a better replacement, for example to ride to the nearest bike shop to buy new metal break pads :) Compatible with Shimano BR-C501, BR-M575, BR-M525, BR-M495, BR-M486, BR-M485, BR-M475, BR-M465,…
Spojka ponorného mixeru Sencor SHB 436x ..., na převodové víko, čtvercový tvar řada Sencor SHB 436.. ( určeno pro všechna barevná provedení) SHB 4360 WH, SHB 4361 BL, SHB 4362 GR, SHB 4363 OR, SHB 4364 RD, SHB 4365 VT, SHB 4366 YL, SHB…
Why My Well MB01 came with a 26mm CW threaded outer barrel and, while I have already made an adapter to 14mm CCW, I have to admit "native" flash hiders just look better. So here's a flash hider that screws directly into the outer barrel.…
Suzuki DRZ400 replacement Front Brake Hose Clamp. Model number 59243-03B01. I broke my clip after hitting a cow with my bike (no jokes). From the pieces I had left I designed this replacement clip. Print in PETG to allow enough…
Decorative planter series… Planter B01: No supports required. Scale as needed
silencer from AWP rifle for L96 MB01 I recommend printing from PETG. The thread is P M24X1.5 This is only an imitation for an airsoft gun
3D model of MLEVPB016MRF1. It will Requires supports, but I have designed it for printing as much as possible. Fits many Sharp carousel microwave models. Here is a list of what microwaves it fits: • R1210 • R1405 • R1406 • R1461A • R1462A…
There are several Ryobi leafblower wall mounts out there, but none of them seemed to fit my specific model. Before printing, verify that this will fit your model, I've included pictures of my leafblower for comparison. I printed this in…
Spojka na převodové víko mixeru SHB01 Sencor SHB 436 x ..., čtvercový tvar
This model is compatible with the lego system.
I designed a concentrator nozzle for the Ryobi brushless compact blower (PSBLB01) in an attempt to increase the output air velocity for blowing water out of bearings and other bike parts after they've been cleaned . I measured the blower…
This model is compatible with the lego system.
This model is compatible with the lego system.
EN: Update 03-14-26: The solar panels I used probably only lasted two years due to inadequate sealing and rear ventilation. I made a new, adjustable, rear-ventilated version for flexible 12V solar panels. Since the original Velux…
Just a RAM mount for a digital tacho. It is made for the KOSO db01rn. There is a M5x30 screw in the Middle to enhance the strength. You need an RAM Mount for your Handlebar. No supports needed to print it properly. I used ABS.…
My Bontrager Ion Pro RT bike light stopped working after only a couple years. I replaced it with a cheap Lumintop B01, which is great, but the mount is awful. This model is an adapter to attach the Lumintop B01 onto the handlebar mount…
This is a speedo holder for a Koso DB01RN for Husaberg 70° models with all wiring instructions. I made a 0° and 10° holder. You need to check which angle is better for you (because of reflection and the “bad” viewing angle of the display…
box for Huepar B011G cross line laser with space for spare batteries Huepar B011G Kreuzlinienlaser Aufbewahrung mit Platz für Ersatzbatterien material: 3DJAKE TPU A95 nozzle: 0.6 / layer height: 0.3 / infill: 15% no support needed lid and…
This is a simple model for a LiPo battery holder. The Battery it is meant to hold is a 44mm x 24mm x 9mm LiPo, like the ones found here... https://www.amazon.ca/gp/product/B01N74TTW6 This model is meant to be added to your existing…
When you buy a Baseus charger, all you get is a cardboard box and a thin extrusion inside. I thought I would like to have some sort of convenient box, so I made a box with a sliding closure. Supports In the case of my printer (Prusa MK4),…
Remixed from the MIN_SB01_80 arm jig. Used for creating equal length delta arms for the MIN_SB01_120. From ball-joint center to ball-joint center the distance is 127mm. See SquirrelBrain's design for feet, original arm jig CAD, and…
I recommend printing with PETG and adding fuzzy skin to the inside of the hole for the flashlight. I used these 3d-printing suitable threads: https://github.com/dans98/Fusion-360-FDM-threads/
Bu tasarım parçalı olarak modellenmiştir. Görselde görünen mavi orta kısım (B01_04), daha havalı bir hava katmak adına renkli şeffaf akrilik düşünülerek, talep edildiği taktirde, 5mm ahşap yada istenilen farklı malzemelerden kesme ve…
A larger version of the stand for Data Frog S80/Dinofire B01.
it's a speaker stand =)))
Helmet mount for the Lumintop B01 bike light. I did not feel comfortable with a GoPro helmet adapter and screws right on top of my head so I designed a plastic part. It attaches with rubber bands you most likely already have from Garmin…
The spacers in my opener went out, so I fixed it, for next to nothing, 3 hours later. OEM kit is about $10 with 5-7 days shipping. To get them close to the OEM "durometer" or function of the original spacers (soft start on the plastic…
I recommend printing with PETG and adding fuzzy skin to the inside of the hole for the flashlight (you can use the ready .3mf file). I used these 3D-printing suitable threads: https://github.com/dans98/Fusion-360-FDM-threads/ This model…
Made a quick drill and cut template that can also be used as a surround to dress up the hole if your cuts weren't perfectly made.
Original part intends to brake.
This wall-mounted button holder is designed to perfectly fit the Lincukoo Smart Mini Switch (CZB01), used in Zigbee-based home automation. The button remains fully usable while mounted. Print it with the back part facing down. No supports…
This wall-mounted button holder is designed to perfectly fit the Lincukoo Smart Mini Switch (CZB01), used in Zigbee-based home automation. The button remains fully usable while mounted. Print it with the back part facing down. No supports…
When you buy a Baseus charger, all you get is a cardboard box and a thin extrusion inside. I thought I would like to have some sort of convenient box, so I made a box with a sliding closure. Supports In the case of my printer (Prusa MK4),…
EN: Update 03-14-26: The solar panels I used probably only lasted two years due to inadequate sealing and rear ventilation. I made a new, adjustable, rear-ventilated version for flexible 12V solar panels. Since the original Velux…
This model is compatible with the lego system.
- Because this microphone arm is round, other clips on the site are not compatible with this product. - So I aimed to keep the cables together with a compatible design. - One advantage of these clips is that even though they provide a…
![Deburring Tool Case (AFA Tooling B01L2XR4P2) [Remix]](https://media.printables.com/media/prints/656236/images/5172135_127ee4eb-1af2-4614-827d-127d6f3cacaf_be530f00-3209-4ede-aa54-90d49423e53a/img_2219.jpg)
