Counting matching models…
Hand modeled 3D rocket. Artist's rendering (mine) of RPG-2 B40 rocket from Russia. It is dimensionally accurate if you do your part in printing. I recommend 0.2mm layer heights. It will take a long time, but it will look great. I have…
Remixed from 2 items, thanks to those users for their starting points! https://www.thingiverse.com/thing:4094861 https://www.printables.com/model/251514-noco-battery-jump-starter-mount/files I wanted to make a hard case for my NOCO GB20…
DESCRIPTION Here a replacement comb for this Remington trimmer, because mine broke by falling several times. The replacement part is available for 2$ on Remingtonproduct.com , but they don't ship outside the US… Reference: Adjustable…
Haken zum Schrauben b40 d4
I recently got a NOCO Boost Plus GB40 and while the device itself is great, the included storage and transportation bag is small and fiddly. While thinking about a proper way to store the power bank within my car, I stumbled over a nice…
People always complain about these breaking so i quick scanned it and cleaned it up for when I need it. Print instructions i haven't printed it yet so let me know what you come up with!
ZWO ASIAir Tripod Mount - ZWO TB40 Category: Hobby
This custom box can hold the jumper cables for the NOCO Boost Plus GB40. It may fit other models with the same form factor. I have only confirmed the fit with the GB40. A STEP file has also been provided to allow someone to possibly…
This is a replacement fuse cover for a 1976 Honda CB400F, same size and shape as the original, and is held in place with the original tabs. It should probably fit any other Honda motorcycle that uses the same fusebox, like the CB550F or…
3 Haken zum Schrauben B40 d4
Remixed to add holes so that buttons can be pressed intentionally, but are still protected from accidental activation. Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 80+ Supports: No Print…
My RB4011 is located in a closet and gets quite hot without ventilation. This helps to cool it down with a slow running 12cm fan standing besides. RB4011 fits perfect on it, but it can easily be resized in the slicer for other equipment.…
This piece widens the clamp-holder blocks in @Rambelaya_314929 's excellent NOCO GB40 case . You might need these depending upon the version of the clamps that came with your battery. If you've already printed the case lid then you can…
Just take a look at the original model as I just modified it a bit. Thumbs up to the original author! Thanks!
Customizable LED Light Diffuser A customizable OpenSCAD model of an LED light diffuser for home routers or other equipment without software brightness control. This is very useful if you have your router in your bedroom or in the living…
This attachment is for the srb400 by SplatRBall ® and allows you to attach virtually any picatinny stock. This model is easily printed and requires supports. If you're looking to add a fixed picatinny stock or even a picatinny mounted…
Print instructions I added supports to the cylinder parts on the side, probably not necessary but since the part only takes 4-5 min on the CORE One I added them just in case. Rafts: No Supports: Yes Resolution: 0.2 Infill: 100%
Das Bodengitter besteht aus zwei einzelnen Teilen, beide werden einfach zusammen gesteckt. Alternativ können die beiden Teile auch verklebt werden. Auf der Unterseite sind kleine Punkte, um einen kleinen Abstand zwischen Gitter und dem…
You can superglue the blocks to the side of the battery pack. the wire clamps can clip to it so you can put it in your car ready to go. I put velcro on the back of the battery to stick it to the wall of my trunk.
A compact holder for the Remington model MB4045 shaver. Dimensions are 53 x 88 x 35mm
These were designed to fit the PRSB401R Kit towers Parts should be printed solid in TPU for best results. The guard mounts using zip ties.
This is simple plate for Bosch PBD40 table inserts made by Killwas. https://www.printables.com/model/1085643-bosch-pbd-40-drill-press-table-insert UPDATE: there is new version with more readable numbers.
⚠ AVERTISSEMENT Vous n’êtes PAS AUTORISÉ à vendre des copies imprimées de ce modèle 📷 Support caméra piéton VB400 / V500 – Gendarmerie - Police nationale Support de fixation (système standard Close Fit (VF)) spécialement conçu pour la…
Proto-Advantage.com SBB400 400 pts solder-in breadboard enclosure. I was being lazy so it should be completely redrawn so it can easily be resized vertically but it wouldn't take much to do even without a redraw. Autodesk Fusion file…
Made a model of the plate for my HMKB40 based on the vector graphics given by the creator of HMKB.
I've designed a simple stand to organise network cables with the Mikrotik RB4011. Prints fine without supports and has plenty of clearance for ventilation. I've also put some 8mm silicone furniture dampers on mine to serve as feet for the…
This is a simple custom receiver plate (Spektrum SPM4651T) for ALIGN TB40 RC Helicopter. Fusion file attached, use it for any customization. Printed from PC Blend Carbon, use adhesive tape for attachment to rear servo.
recommand to use pla-cf, to get better friction.
In case your seat doesn't have the rubber stops. Made of TPU.
3mf File STL File No supports No Glue PLA Basic Black and White 0.20 Layer, 2 Walls, 15% Infill 2 plates THE STORY OF UB40 The story of UB40, and how this group of young friends from Birmingham transcended their working-class origins to…
This holder fits the Linak HB40 series (HB41, HB42, HB43 and HB44). It can be printed in the material of your choice, but an infill of at least 25% is recommended for better durability. Mounts with 2 M4 (5/32 in) countersunk screws
Just take a look at the original model as I just modified it a bit. Thumbs up to the original author! Thanks!
Hi I modeled a plug for the rear brake disc on a Mitsubishi Pajero Pinin. Part number: MB407635 I recommend printing with TPU 95A filament
This holder fits the Linak HB40 series (HB41, HB42, HB43 and HB44). It can be printed in the material of your choice, but an infill of at least 25% is recommended for better durability. Mounts with 2 M4 (5/32 in) countersunk screws
Hi I modeled a plug for the rear brake disc on a Mitsubishi Pajero Pinin. Part number: MB407635 I recommend printing with TPU 95A filament
This is the main fuel T in between carburetors 2 and 3. I've included a picture of how I printed it. It's modeled as close to the original as possible without all th tabs. I have not tested this to see if it holds fuel, but it does fit in…
Rack mounting bracket that allows you to put a Mikrotik RB4011 in a 10" soho type server rack. Caveats The RB4011 is slightly wider than the space between the rails, which means a small portion of the routers face will be behind the rail,…
Made a dust cover for my HMKB40. Fits completely over the keyboard and is able to accomodate big keycap profiles, as I designed it for my MT3 keycaps.
This was designed for the Caterpillar CAT B40 as a friction fit case/cover to protect it and prevent accidental key presses. It has the annoying feature that even with keylock on, you can still dial 999. As it deactivates all numbers…
Wall holder - thermostat Computherm B400RF wifi Printing paramters: Layer height : 0.2 Perimeters : 2 Infill : 100% Material : PLA Printer : Anycubic Mega S
