Customizable LED Light Diffuser (preset for MikroTik RB4011)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.06 – €0.08 net (excluding VAT)
For file: led-light-diffuser-mikrotik-rb4011-power-sfp-plus_0.2mm_PETG_MK3S_4m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.07 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 4.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A customizable (OpenSCAD) LED Light Diffuser for home routers or other equipment without software brightness control
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 41
- Makes
- 0
- Views
- 602
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v2.0
Customizable LED Light Diffuser
A customizable OpenSCAD model of an LED light diffuser for home routers or other equipment without software brightness control.
This is very useful if you have your router in your bedroom or in the living room and you want to reduce the brightness of your activity LED lights if they interfere with your sleep.
The model is currently optimized for MikroTik RB4011 routers (power and SFP+ activity LED and the Ethernet activity LEDs), but can be customized in OpenSCAD to fit other equipment.
You can make the fit tighter by adjusting the diffuser height parameter in the OpenSCAD Customizer.
Printing guidelines
- Setup OpenSCAD and export the stl file (optional)
- Optionally modify the project to fit your equipment
- Export the stl file
- No supports are needed
- Print in PETG with a 100% rectilinear infill and a 0.2 mm layer height
Changelog
- Version 0.1.0 (Initial version)