Counting matching models…
The mainboard does not seem to come with a Clip to arrest the M.2 Disk Drive in it's NVME slot - in case you need one: here's an option. Lock the holder on the bottom side of the mainboard by adding a regular metal M4 thread nut on top of…
Asrock B450 Pro4 IO/shield. Category: Electronics
Here is the Asrock B450m Pro4 IO/shield. Enjoy! Category: Electronics
IO Shield for the Asus TUF Gaming B450M Plus motherboard, modelled in openscad.
IO Shield that fits an MSI B450M PRO-M2 MAX
Easily printable IO Shield for the Gigabyte B450M DS3H motherboard. Even though I had no issues using this IO Shield printed in PLA I would highly recommend going for filaments with a slightly higher melting temperature than PLA like PETG…
This is an IO shield for a GIGABYTE B450M DS3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
IO Shield for AMD AM4 Asus PRIME B450M-A Micro ATX Motherboard. Recommend PETG or PCTG.
Another second-hand case where the seller didn't send the IO shield. I couldn't find a free download anywhere on the internet, so I came up with a nice design using my old designs and another similar MSI model IO shield. Just using…
My friend made this STL because the board he gave me didn't have a shield said I could upload it here as we were unable to find one pre-made. Using the defaults for PLA will result in PLA spaghetti, see the settings below. PETG would…
My backplate for Gigabyte motherboard B450M DS3H (rev. 1.x). Number of walls 3, layer height 0.2 mm, infill 15%, 0.4mm nozzle, no supports.
A modern enclosure for this fantastic Mikrotik device with the following features: Very tight geometry. Follows Mikrotik Branding Guidelines. Air ventilation placed where heat is mostly generated. Textured enclosure for less 3d…
IO Shield for MSI B450I Pro ITX motherboard.
This is quick and simple model I whipped up to test and see if TPU would survive with fuel. This part is equivalent to Honda Part number 17631-329-003 and works with multiple vintage Honda fuel tanks. May fit others! The dimensions are…
Meshed I/O shield made for the Asus Strix B450i gaming, snaps perfectly in place thanks to little bulges on the outside. When viewing it in 3d you will just see a filled piece, to obtain a meshed version you shall set this parameters on…
Simple ATX IO shield for the motherboard.
This is a remix of the original ASRock B450 Pro4 IO Shield with a redesigned appearance for AMD-based systems. The model is available in two versions: Ventilated - includes additional cooling slots to improve airflow around the rear I/O…
Jest to niestandardowa tylna osłona wejścia/wyjścia wykonana dla płyty głównej Machinist B450.@Pasuje do standardowego otworu ATX I/O i jest łatwy do drukowania bez wsparcia.@Pokrywa pomaga oczyścić wygląd tylnego panelu i chroni otwartą…
Honda CB450 intake boot with vacuum port update: uploaded correct file that fixes the vacuum port.
For those of you with a MSI B450i Gaming Plus Max Wifi that may have lost your IO shield, here you go. I did do a test fit before posting. STEP file uploaded for direct printing or if you wanted to load it up and make changes in CAD. Enjoy.
I used a 10mm multicolor to get high contrast but can be printed in one go. Not filament efficient.
Updated model https://www.printables.com/model/1282674-complete-assembly-for-2nd-gen-cb450-single-intake This is a simple intake designed to equally distribute air and fuel between each cylinder from a single carburetor. Intake is…
Honda CB450 intake boot gasket
This intake is designed to replace Honda's 2nd gen CB 450 engines dual carb to a single carb setup, while maintaining proformance and increasing reliability. I only intend for this design to be 3d printed for moderate testing and mockup.…
The asrockrack board b450d4u-v1lq5 is beig sold at a very good price some cases were needed. had some supermicro CSE512 left over, combine them, started from the very identical board x470d4u (that has more connectors). v1.8 add more…
A 3D-printable replacement I/O shield for the MSI B450M Mortar motherboard. Designed to replace the original rear I/O shield if it is missing, damaged or lost. The model is designed to fit the motherboard's rear connectors and the…
Remix of @Enjoyneering_2033856's plate. Shifts the ports 1.5mm to the left from the original.
The original plastic locking and protective screw were broken. For that new made in Fusion360 including the thread and hexagon.
This is an IO shield for a GIGABYTE B450M DS3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
Official documentation: https://routerboard.com/CA150 . After realizing that every piece of RB450G is different, I had to make universal adjustments. So, the modification in version 3.
![MSI B450M-A [A320M-A] PRO MAX IO SHIELD](https://media.printables.com/media/prints/4473f74d-ef70-41f1-8342-33365d03dc83/images/10909405_7f874eb5-c4e6-43da-848d-dd0e018cd8ad_15f32e9b-0376-414d-8d81-ce77bddd999a/img_3857.jpg)
