P
PrintablesMartin
ZWO Seestar S50 solar filter adapter for Baader
This is simple adapter for new solar filter. I used Baader solar film I had home. Design is based on the original solar filter.
- Downloads
- 168
- Likes
- 10
- Rating
- 0
Search results: baad
31 models
P
PrintablesHydra
ZWO EAF bracket for Baader Diamond Steeltrack 2" Focuser
I wanted to attach the ZWO EAF to the Baader Diamond Steeltrack 2" Focuser, and the bracket included with the ZWO EAF isn't really suited to the Baader. I've left a bit of play in the bolt holes, and the focuser brake hole should have…
- Downloads
- 142
- Likes
- 9
- Rating
- 0
P
PrintablesLuke
Baader BDS-NT Base for 150mm Newton Telescope
BAADER Diamond Steeltrack BDS-NT Base Adapter Adapter plate for a 150mm (6") Newtonian telescope to mount a Baader Diamond Steeltrack BDS-NT Focuser. The small hex nut adapters are provided for the inside of the tube. Fits on: GSO 150/600…
- Downloads
- 80
- Likes
- 5
- Rating
- 5
P
PrintablesCYo6974
Baader solar filter holder for camera lens
This holder is for 100mm baader solar filter (thin paper / film). Print a cover and an adapter of the size of your camera lens, and sandwich the filter film in. Then thread the adapter into the camera, make sure it's secure. And you're…
- Downloads
- 77
- Likes
- 11
- Rating
- 0
P
PrintablesDuane Dibbley
Baader Planetarium BDS-RT & ZWO EAF Bracket
The standard EAF metal bracket doesn't fit the Baader Planetarium Diamond Steeltrack 2" focuser without modifying the metal bracket to fit the larger M6 screws so I made up this bracket which utilises two of the M4 “attachment screws” and…
- Downloads
- 68
- Likes
- 6
- Rating
- 0
P
PrintablesLuke
MTF Mount for Baader Steeltrack
MTF [MagneTicFocuser] mount for BAADER Steeltrack focusers This is a mount to magnetically couple the MTF to the telescope. It fits on all Baader Steeltrack focusers. Link to the MagneTicFocuser [MTF]…
- Downloads
- 54
- Likes
- 6
- Rating
- 0
P
PrintablesJeanlucpica
Baader UFC-Case for filter sliders
Baader UFC-Case for filter sliders This is a case for astronomical filters using the UFC-System by Baader Planetarium. UFC-Case for filter sliders with mounted filter Storage box with hinged lid holds all UFC filter sliders I fixed the…
- Downloads
- 39
- Likes
- 2
- Rating
- 0
P
PrintablesJeanlucpica
Baader UFC Seal
Baader UFC Seal This is a part for the astronomical filter UFC-System by Baader Planetarium. 3D-printed UFC seal to close UFC systems without inserted filter slides Suitable for all UFC systems - closes the opening for the filter sliding…
- Downloads
- 37
- Likes
- 3
- Rating
- 0
P
Printablesbsfiosco
Fotodiox T-EOS M Astro Edition to Baader UFC (Universal Filter Changer) Adapter
The Canon EOS-M series digital cameras, especially the EOS M6 Mark II with it's mirrorless design and 32.5MP ASP-C sensor, is a great camera to get for astrophotography if your not looking for a dedicated astrophotography camera or full…
- Downloads
- 34
- Likes
- 5
- Rating
- 0
P
PrintablesJeanlucpica
Baader UFC Dark-Slider
Baader UFC Dark-Slider This is a part for the astronomical filter UFC-System by Baader Planetarium. Suitable for all UFC systems Closes the aperture of UFC and telescopes at the same time to create darks with CMOS Cameras Vignettes the…
- Downloads
- 32
- Likes
- 2
- Rating
- 0
P
Printablesvlaine
Hadley Telecospe filter holder - eclipse Baader filter holder
Print the filter holder 2 times. Sandwich the filter between the 2 filter holders and glue them together. I used E6000 glue. Stay safe and only purchase certified filters. Compatible with the Hadley telescope:…
- Downloads
- 25
- Likes
- 4
- Rating
- 0
P
PrintablesJesco
Storage Box for Baader ASTF100 Solar Filter
Protective box for my ASTF100 solar filter from Baader. It allows you to store the filter pre-assembled. The box has extra room to put in a pack of silica, which can be screwed close to avoid the silica bag banging around in the case. It…
- Downloads
- 24
- Likes
- 3
- Rating
- 5
P
PrintablesPaul Hardwick
Baader Diamond Steeltrack 250mm Newtonian focuser baffle
These two parts just fit between the OTA tube and the Steeltrack plate. They eliminate any chance of stray light and pack the space maybe aiding rigidity and squareness. Just loosen the plate and push these parts in on each side then…
- Downloads
- 23
- Likes
- 1
- Rating
- 0
P
Printables0ak3
Baader 160mm ERF holder
Two of the “160mmBaaderERF HolderV1” files fit together as a clamshell around the Badder 160mm ERF. Clear aperture is 153mm. Printing was done with PETG. Use 1mm felt tape along the edges and front/back to hold the ERF securely in place…
- Downloads
- 22
- Likes
- 4
- Rating
- 0
P
PrintablesPaul Hardwick
Baader Diamond Steeltrack 12 inch Orion UK CT12 Newtonian focuser baffle
Print both pieces upside down. PETG or TPU is the preferred material as it flexes around the OTA.
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
Printableslcwii
Baader M48 Quick Changer Covers
Three pieces are printed in TPU and one piece (adapter connection on the telescope side) is printed in PLA as it is being clamped in place. Category: Other
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
Printableselcacharrista.com
Skywatcher Mak 127 solar filter — magnetic quick release (Baader AstroSolar)
A 3D-printable solar filter for the Skywatcher Mak 127, built around Baader AstroSolar Safety Film OD 5.0, with a magnetic quick release so it can be pulled off and put back without touching the telescope. It was designed for the total…
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
Printableschantepierre
Baader MPCC holder for fixed corrector low-profile focusers
Holds a Baader MPCC by the external filter thread for fixed usage in a very low profile focuser UTA. Add three little wood slabs to the Backfocus setting tool so you have a handy driver to adjust backfocus, once. See the schematic to…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesDidymoon
Tapa para filtro de Baader telescopio 76 mm de Diametro
altura de capa 0.28 - 0.32 con boquilla 0.4, hecho en PLA Puedes ver más diseños míos en: https://cults3d.com/es/usuarios/Didymoon/modelos-3d
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
PrintablesTorc Torr
Ultimate low stack ZWO 2" eyepiece adaptor for Baader CoolCeramic Herschel Wedge on Vixen ED / AC
If your refractor telescope has limited back focus, then this adaptor allows you to save up to 30mm compared with standard adaptors, and means you can achieve perfect focus. This also means you can easily swap over the ZWO ASI585MC (or…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesAxel
Baader Knob - Stronghold Clamb for Pan EQ prism
Also see: https://www.printables.com/model/1888809-baader-clamb-knob-stronghold-pan-eq Baader delivers a 3D tool for the PAN clambs and stronghold:…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesSimon Watts
ToupTek AFW extender for Baader Filters
I recently purchased a ToupTek AFW 5x2" filter wheel. Annoyingly my expensive Baader filters were too tall to fit into the filter wheel, as there is a little raised board at the bottom of the AFW with two sensors on which the filters were…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesFloralCoal
Baader laser case - collimation check
Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.2 Number of perimeters ... 2 (or more) Infill ...................................... 15% (or more) Supports .............................…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
Printablesmechanical0815
Disassembly tool for Baader Planetarium Laser Collimator Mark 3 rotary switch in case of a loose contact
Disassembly tool for removing the sleeve nut on the battery insert, which is required in the event of problems with switching on the laser due to a loose connection. Suitable for flat-blade tool screw driver bit 5 mm with total length ~…
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
Printablesmechanical0815
2" Alignment / collimating adapter for Laser Collimator Baader Planetarium Laser Colli Mark 3 or similar
A laser collimator should be (perfectly) collimated at the factory. If this is not the case, it is (theoretically) possible to collimate it yourself. However, if this is not possible - as in my case, because I had no way of turning the…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesFranticware
Cokin P frame for BAADER AstroSolar Safety Film
Disclaimer: Watching and photographing sun is dangerous. Use at your own risk. Follow intructions provided with BAADER AstroSolar Safety Film. Instructions: Print in black PETG (or ABS). Do not use PLA, it could melt under direct…
- Downloads
- 4
- Likes
- 2
- Rating
- 0
P
PrintablesL'Hôte Pierre-Jean
Solar Filter for Unistellar Odyssey (Baader AstroSolar OD 5.0)
I shot the partial solar eclipse of August 12, 2026 through this filter on my Unistellar Odyssey. The gallery has both a single frame straight from the telescope (orange = low Sun plus the camera's warm rendering) and a stacked,…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
PrintablesPaul Hardwick
Baader Diamond Steeltrack 350mm Newtonian focuser baffle.
Designed by request, I have not tried this version myself.
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
PrintablesAxel
Baader Clamb Knob (Stronghold, PAN-EQ ...)
Also see: https://www.printables.com/model/977528-baader-knob-stronghold-clamb-for-pan-eq-prism Baaders knobs are not easy to tighten, especially at night, with cold fingers. To apply more force and make handling. To apply even more force…
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printables
Baader laser case - collimation check
Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.2 Number of perimeters ... 2 (or more) Infill ...................................... 15% (or more) Supports .............................…
P
Printables
Storage Box for Baader ASTF100 Solar Filter
Protective box for my ASTF100 solar filter from Baader. It allows you to store the filter pre-assembled. The box has extra room to put in a pack of silica, which can be screwed close to avoid the silica bag banging around in the case. It…