Counting matching models…
This is a holder for BAHCO sliding combination squares CS150 and CS300 for IKEA SKÅDIS pegboards . It uses Skadis T-Nuts for a very secure mount. For CS150 there's a single and a double version for one or two combination squares…
BAHCO brand chisel set holder for your workshop to easily gain acces to all chisels. Fits the 6 pcs chisel set. Printing settings layer height is not critical, I used 0.20 mm Printed on X1 Carbon at 100% speed (normal) no supports needed…
The design for the big 305 square is stackable and has a full height of the gridfinity base (6). The small organizer is not deep enough by a few millimeters, so it is not stackable. Both designs contain some additional storage, e.g., a…
Bahco mount for 4 x L Bahco mount for 4 x L old big model Bahco mount for 4 x 4 L Bahco mount for 5 x 3 PH-2 PZ Bahco mount for 5 x EL Bahco mount for 5 x TX
Streamline your tool organization with this tailor-made Flathead Bahco screwdriver holder, designed exclusively for the IKEA Skadis pegboard system. This 3D model is engineered for a precise fit, catering to the Bahco screwdriver series…
Streamline your tool organization with this tailor-made Philips Bahco screwdriver holder, designed exclusively for the IKEA Skadis pegboard system. This 3D model is engineered for a precise fit, catering to the Bahco screwdriver series…
Streamline your tool organization with this tailor-made Torx Bahco screwdriver holder, designed exclusively for the IKEA Skadis pegboard system. This 3D model is engineered for a precise fit, catering to the Bahco screwdriver series with…
Removed the overhangs from the original to make it easier to print. This is a minor edit, all the hard work was done by the original creator.
File Handle - London pattern fits Bahco 7" Regular Saw-Sharpening file. Because the tang on these files are a tapered hex, it is very likely that this handle will fit a number of other files by Bahco and others, but I have no others to…
File Handle - London pattern fits Bahco Needle Saw-Sharpening File. Unlike larger files made by Bahco and other brands, the tang has no taper or hex shape. It is a simple round tang. To retain it I incorporated an M3 captured nut/bolt…
Just for holding the combination square on my wall of tools.
I made this holder for my Bahco combination Square to always have it easily accessible. The model has screw holes so you can mount it anywhere. I mounted it to my french cleat system in my workshop. You can easily print this with every…
I bought some Bahco needle files but the handle was really bad. I made these two handles: V2 is more beefy, use it if you are used to grab the file full fist. V3 is smaller, use it if you are using the files for precision filing Inner…
Designed from scratch in OnShape, this is a holder/mount for a Bahco ratchet driver to fit on the IKEA SKADIS pegboard using the T-Nut system .
Needed a pegboard holder for my tape measure so I designed one. I uplodaded .step and .f3d files for easy editing too! https://ko-fi.com/aasikki
Wall mount for Bahco quick clamps. These are only tested for the 300mm type, however i am quite sure they fit all smaller models, but not sure for larger types. They are designed in 2 pieces that fit 3 clamps each. You don't have to print…
See the original model for lots of great insight! Authored on OnShape: https://cad.onshape.com/documents/cf86bf811480b75a6990c559/w/b26cfa5d56c8f99ff39a660b/e/d2633e8f0533055b629a541e?renderMode=0&uiState=65aa36872aa89048859bdda5
Description Wall-mounted holder designed for the Bahco BE-9886 screwdriver set (Bahco ERGO handles). It keeps the drivers organized, easy to grab, and makes the set look tidy in a workshop. Not a "front-split" version. Drivers must be…
Ikea Skadis Halter für Bahco Farbschaber (Link: https://www.bahco-werkzeuge.de/products/1722.html ) Version V1 : nur für den großen Farbschaber Version V3 : für beide Farbschaber und die Ersatzklingen Ikea Skadis holder for Bahco paint…
Bahco five-piece metal file set that i needed a holder for. The only non-original part is the multibuild pegs for obvious reasons.
Holder for Bahco Claw Hammer for Multiboard with multiconnect connectors. Prints without supports.
Printed with Prusa MK4 0,6mm Nozzle and Prusament PETG use organic support. For left side part you have to mirror the stl in prusa slicer.
Extra dividers for Bahco 19 and 24 compartment Storage/Organiser Boxes. Print Settings: Printer: Anycubic All-metal Mega Rafts: No Supports: No Resolution: 0,2 Filament: PLA
I mounted it with small wood screws. V3 is with added rounded edges. 3D PRINT SETTINGS: Layer Height 0.2mm. Printed in black 1.75mm PLA from Creality with a 0.4 nozzle. No supports needed. 15% Infill
My BAHCO CS150 is 1.2mm wider than the original model allowed for. Changed nothing else, refer to the original model for instructions.
Description Wall-mounted holder designed for the Bahco BE-9886 screwdriver set (Bahco ERGO handles). It keeps the drivers organized, easy to grab, and makes the set look tidy in a workshop. Not a "front-split" version. Drivers must be…
Printed in PETG with 0.2mm layers and a minimum of 8 perimeters, important is to print it on its 45 degree side with a wide brim to get the layers in a more optimal orientation, supports was not needed for me but you know how good you bed…
Holder for Bahco pin Centre Punch Set with Chrome Finish 3735NS/4 Sizes of hexagonal holes 2 x 11mm, 9,5mm, 8mm
Hook Compatible with the Ikea Skadis for holding the Bahco 8070 150mm adjustable wrench (spanner)
This piece is for holding spanner number 7. I use it for my Bahco socket set S138. But it could be useful for others sets. Category: Hand Tools
Holes are 3.5mm diameter. I use #4 screws for wood. I spent a lot of time deciding which ratcheting screwdriver I wanted and this is the one I picked. So naturally it needed a proper home. If you have a bahco 808050 this holder will fit…
On the side of the 70mm version, there is a place to put a 7mm Allen key (the one which is never included, in any set, and one day you will need it. If you have one, you don't know where you put it - that's why there is a special place…
Printed in prusa PET The brass screw head is press fitted to knob.
Lost one of the pads on my clamp.... Print in TPU
designed for BAHCO BH36000, but should fit on many others brands, which are most likely the same… I printed them with TPU.
Pajala 1/2power socket set and Bahco 1/4, 3/8, 1/2 socket set holders for tool chest and drawer or any drawer. More compact than the original package. Made to fit into 58mm high drawer.
gridfinety for BE-9785 (note. you have to cut of the back henger part of the set for it to fitt) i have not printet the innfill part my self so i am not sure if it fits
I bought some Bahco clamps and later purchased a Bosch GKT 55 with a bosch fsn track. In order to not have to purchase the specialized clamps I made an adapter. Print with 100% infill and it uses one M3 nut and a m3 screw. (length doesnt…
This piece is for holding spanner number 7. I use it for my Bahco socket set S138. But it could be useful for others sets. Category: Hand Tools
Made these holders to store them properly on my pegboard. Print according to 3mf files Details will follow.
I needed something to organize my tools, specifically my Bahco pliers/wire cutters. After browsing for something that might fit, i ended up designing my own. They're obviously inspired by alot of the other versions that is out there. They…
Small Screwdriver holder for the Bahco BE-9885 Screwdriver Set.
Small Screwdriver holder for the Bahco BE-9886 Screwdriver Set.
Halter / holder für / for Stechbeitel / chisel BAHCO 424P-S6 Ein Halter für das 6-teilige Stechbeitel-Set von Bahco. Die Stechbeitel stecken leicht schräg im Halter und können so leicht entnommen werden. Die Monatge des Halters erfolgt…
This part fits the Gridfinity system Gridfinity base sizes: 1x5x1
Gridfinity inlets for the full and stubby screwdriver. The small one is made to stack on top of the shaft for the big one. Nothing can be added on top op the handle of the big one. A bit of tight fit on the stubby one but it holds it in…
