Bahco Quick Clamp Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bahco Quick Clamp Wall Mount, tested for the 300mm type.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 47
- Makes
- 0
- Views
- 237
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Wall mount for Bahco quick clamps. These are only tested for the 300mm type, however i am quite sure they fit all smaller models, but not sure for larger types.
They are designed in 2 pieces that fit 3 clamps each. You don't have to print both, or mount them like i have done in the picture.
But if you do want the 6 slot solution, print one of each file (the normal one and mirrored)
The screw holes are 5mm in diameter.
Filament
I recommend , PETG-CF, ABS (-GF) or ASA(-CF).
Personally i've printed it in Bambulab PETG HF. It works, but i do see that a stiffer material would have been better or something that withstands weight creep a little better than PETG.
Print Settings
Orientation like the picture.
Supports are optional, i personally prefer to use it.
Layer height 0.2mm
4 Walls (Perimeters)
1.2mm top and bottom layer
Gyroid or Cubic infill I recommend min 15-20% (What I used 15%)
I also have a generic model for max 38mm tooth clamps 2x2 and max 30mm tooth clamps 3x3 clamps here: