Counting matching models…
This model has become very popular on TikTok, and I've received numerous requests to make the files available for print. So here you go! This is a Stanley tumbler shaped lip balm holder which prints in 4 pieces (must be assembled). The…
Improved rev 1 | Original model sized for Burts Bees sized tubes (approx. 67mm long by 16mm diameter) with some nice improvements: Model is a little sleeker near the keychain loop. Uses a little bit less material and prints a little…
After creating some more complex models/containers with threaded attachments and supports, finally came up with this simple and less bulky design. The smaller cap goes into the larger portion. The larger part attaches to the top of the…
Lip balm container for holding 4.25g lip balm tubes, such as Burt's Bees . Features a 90 ° twist top for secure and easy carrying. Dimples on the top section indicate where the locking lugs are located. Keychain rings can be attached…
Don't lose your lip balm! The temptation is real: twist that little dial on your lip balm or lipstick to extend it, then twist it back. But, I'm sure you or someone you know has experienced the time when you twist it just a little too far…
There's another lip balm holder for Gridfinity, but I wanted one that stood upright. This is that. It is 1x1 gidfinity squares and can hold up to 2 lip balm sticks. Has been confirmed to fit Burt's Bees lipbalm comfortably and with a…
A holder for up to 4 lip balm/chap sticks that works with Gridfinity
My girlfriend had several used lip balms that either had missing caps or loose cracked caps so I decided to revive them with some 3D printed replacement caps! The model is quite basic, just a hollowed cylinder with some fillets. This lip…
Never lose your lip balm again with this universal lip balm keychain holder! Designed for everyday carry, this compact clip-in holder keeps your favorite lip balm securely attached to your keys, bag, or backpack so it’s always within…
This is just a simple print that slips over the cap of you lip balm, or chapstick, to make it into a key chain. its much quicker to grab you chapstick if it's hanging on the side of your bag than buried within the void. It's a pressure…
This is a simple clip-on holder for Chapstick or similar type lip balm sticks. For larger ones (such as Nivea) there is a larger diameter version "Nivea.stl". I tried some of the chapstick holders from here on Thingiverse for my wife, but…
****** UPDATED June 6th 2024 -Added 15 bottle holder -Added 6 balm/butter tray ****** This is a stand I created to hold five 1oz/30ml bottles of beard oil with the diameter of approximatly 33mm. The back row sits up 10mm higher than the…
Lip balm dispenser that holds 6 Burt's Bees or similar lip balm/chapstick tubes and dispenses them one by one. I modified ethanbeere's design to fit Burt's Bee brand lip balm and cleaned up some surfaces.…
Inspired by Pavel Rampas 's elegant Battery Holder Vase Mode , I designed a Lip Balm Holder for Chapstick or Burt's Bees brands to be printed in spiral vase mode. For Chapstick, please use Chapstick Lip Balm Holder STL due to its smaller…
My wife has a lot of lip balm and wanted something to store them in. She liked the idea of being able to cycle through them to get random flavors adding a bit of randomness to her day. I modeled this in fusion to be printed on its side…
I know there are a lot of variations out there already but i wanted to design something of my own. Introducing the Balmobile ! A chapstick,lip balm, pen, pencil, stylus holder for your car! Just use a double sided tape from auto zone or…
Gridfinity Lip Balm Organizer that fits any standard lip balm.
This a smaller version of a lip balm filler. Fit most common lip balm container. I made it from ABS.
The BalmBuddy is designed to keep your chapstick handy and clean. Most designs out there replace the cap entirely, which puts the filament too close to the lip balm, which can get messy over time due to the layer lines. That didn’t sit…
This is a tray that holds standard-sized lip balm tubes. I've included STL files for various sizes from 2x2 to 4x4, and the Fusion 360 file is also here if you want to customize it more.
I printed this in PLA, .2mm layer height, with a brim. Let me know if yours doesn't fit and I can share a looser or tighter version.
Tired of fishing around your pocket while driving, looking for your trusty tube of Burt's Bees? Thought your LipSmacker was in the cup holder, but realized it's down between the seat? Is your Blistex now a liquidy puddle, coating every…
It's a Gridfinity lip balm and Dramamine bin all-in-one! Not a lot to it. The lip balm is meant for Burt's Bees, but others SHOULD fit… I think. It's 4u tall so it can still stack with the Dramamine tube in it. The STEP and F3D files are…
A simple gridfinity lip balm holder that can hold up to 2 19mm diameter stick
The handle is designed to press 4 syringes at the same time to make the filling faster. The grid is used to hold the tubes to enhance local lip balm production. The distances between the tubes in the grid correspond to the distances of…
Lip Balm holder that fits into the door handle of a Subaru Outback (I have a 2020, but likely fits others). Holds two containers side-by-side. I printed in PETG since car interiors can get very hot and potentially warp PLA. Prints flat…
Print as is with at least three walls for strength.
was tired of my lip balm rolling around my center console and created this insert for the 5th gen CRV but may fit other
Insert the smaller keychain portion into the cap first. Replace the original lip balm lid with the printed cap. Cap stays secure with a tight pressfit.
Gridfinity container that holds 2 beard balm tins (2oz side, ~68mm diameter). Print with your material of choice, no supports needed, don't use a brim unless you hate yourself. Thanks to Zach Freedman , who introduced the world to…
Keychain Chapstick (Lip Balm Holder) A simple keychain to hold onto your lip balm. Compatable with Chapstick , Carmex , and Burts Bees . This securely holds onto the cap allowing you to easily apply lipbalm without any disassembly. The…
Used the dear head for a cover for lip balm for kids.
Most lip balm sticks seem to be bit under 2cm diameter so this should fit most lip balms. Tested with Labello and Benecos, blistex is smaller diameter so a looser fit but works with it too. Not stackable. 1x1 gridfinity. Not standard…
Compressor fan of a friend of mine. Tried this morning and it seems to be fine. The compressor is a 5.5 HP Balma 39/270. The version used on the compressor is the full one but I also added a slightly lighter version that should be tested.…
Stop that ChapStick, lip balm from rolling off coffee table or night table.
Эта коробочка для домашнего бальзама для губ или вазелина. Пчелиный воск, также как и другие воски прекрасно загущают масла до любой консистенции. Рецепты: Бальзам для губ: Кокосовое масло - 5 мл, Какао масло - 5 мл. Пчелиный воск - 2,5…
A lot of zero waste and plastic-free lip balms come in paper tubes that are roughly the same size as conventional chapstick, but no grown adult can fit their pinkie in to push up the lip balm after a certain point. I designed this very…
Sweet, now my tactical chapstick's got a new sheath* to replace the one that got smashed! * Sheath, cap, whatever you want to call it. Its purposes are to cap the container's end and to guard the adjustment mechanism. Unlike a typical…
Very fast print, Makes it very easy to keep your odd-shaped Palmers lip balm on your keys. This is a tight fit as to not lose it while traveling, all you have to do is press the keychain onto the existing cap. Print Settings Printer:…
Stand for two 4.8g lip balms The tolerance is quite low, you might need to scale it up a bit. Category: Organization
Consider tipping me 100g of filament for prototyping if I've saved you some time :) really appreciated Fits 2 generic lip sticks in one 1x1 gridfinity bin! It has magnet holes if you prefer that flavour
Other brands may work but this is designed to hold sample sizes of beard oil and balm from Mad Viking Beard Co. The holes on the side are for 6mm x 2mm magnets. The stand will eventually connect to other wet shaving and bathroom…
I was tired of my lip balm always twisting open in my pocket. This solved the problem for me. I had to peel the label from mine for it to fit, size it up ever so slightly for a better fit without label removal. Only tested on Burt's Bees,…
This is a solution to prevent your Chap stick/lip balm from rolling around on flat/sloped surfaces. This size has been tested to fit Blistex and Burt's Bees varieties but probably fits others. Ideally printed in TPU, which gives the snug…
Easy way to store lip-balms and quickly grab one on your way out the door!
A while ago I made this in Tinkercad for my Labello lip balm and nose spray. Smaller hole is: about 19mm diameter Bigger hole: about 25mm diameter
I printed this at 0.1 mm layer height, 100% infill and without support.
Holds a Mad Tattoo balm in my drawer to fit on other gridfinity pieces. it's a 2x2x2 gridfinity size Sliced on cura, 10% infill, .8mm walls, no supports
Pocket Clip for Winco Lip-balm
Чего уж тут описывать… Любой пластик и любой клей! Так как все баночки имеют чуть-чуть разные размеры, свою банку надо померять и отмасштабировать модель. Текущие размеры: диаметр верхней крышки: 27.2 мм диаметр нижней крышки: 26мм Смерть…
This is a small holder for lip balm and eye drops to keep them organized by your bedside. I printed it in a glow filament so they're always easy to find at night. Design parameters Small slot is 20mm diameter and 15mm high (product shown…
A while ago I made an 2 in 1 version in Tinkercad, but I got a bit more skills in Fusion now, so I decided to make a new one. This time 2x nose spray instead of just one. The small hole has a diameter of 19.10mm The 2 bigger holes has a…
Just a substitute for a broken cap for the M.Asam Lipbalm.
Supports NOT required. Requires: 2 x M3 nuts 2 x 16mm M3 bolts A lip balm Print the lollipop adapter to fit smaller lollipops (Dum Dum size). The lollipop stick may need to be shortened a bit to fit properly inside. Ergonomic design based…
I made this in tinker cad, never seen one like it. but I only searched briefly before going to cad. my first published work. It was made for a Blistex lip balm Despencer. Printed on an X1C PTEG filament 2Walls, 15% gyroid infill and…
Keychain Lip Balm Holder This is a small universal lip balm holder that connects to your keychain. I friction grips onto the cap allowing you to easily apply lipbalm without any disassembly. Compatable with Carmex and Chapstick branded…
Do you have dry lips? Well, I've learned that if your lip balm has menthol in it then you're wasting your time, but, you can waste your time in a more organized and efficient manner with this (or buy a lip balm without menthol). This…
1x1 gridfinity tile to hold 4 standard sticks of lip balm. No inset. Holes are each 18mm in diameter to allow for easy storage with minimal wobble
Un demi flacon de parfum pour faire du wallart. Il est possible d'utiliser un flacon entier mais je ne l'ai pas imprimé. L'impression du demi flacon se fait en remplissage LIGHTNING qui fonctionne parfaitement. Larg 140 Haut 170 Prof 70 mm
Hallo, nachdem ich den Wandhalter von @Olitri90_213274 gedruckt und meiner Frau gezeigt habe, wollte sie so einen für die Handcreme. ich hab das Modell entsprechend verkleinert, und voila hat es sein Platz im Badezimmer gefunden.
lip balm holder (Balea, Jelení lůj, Labello, Astrid, Weleda, Dove, ...) Dimensions height: 7 cm (2.75590551 inches) radius: 2 cm (0.787401575 inches) weight: approx. (4.8 g) (0.169 ounces) Creator: sebrlicek
Un demi flacon de parfum pour faire du wallart. Il est possible d'utiliser un flacon entier mais je ne l'ai pas imprimé. L'impression du demi flacon se fait en remplissage LIGHTNING qui fonctionne parfaitement. Larg 140 Haut 170 Prof 70 mm
Un demi flacon de parfum pour faire du wallart. Il est possible d'utiliser un flacon entier mais je ne l'ai pas imprimé. L'impression du demi flacon se fait en remplissage LIGHTNING qui fonctionne parfaitement. Larg 140 Haut 170 Prof 70 mm
EDIT: Update to V2.0 soon, I did some mods on it again, it touched the frame so I had to move the arm a bit forward. Now it works very nice. It needs harder antiVballs. This is a modification to zatoraxs gimbal, his gimbal did not fit my…
A simple little uni-tasker to hold a lip balm tube upright for easy grabbing. I put felt feet on it and inside the hole so that it's quiet to interact with at nighttime.
Replacement for a lost cap. Clicks firmly into place. Used print settings: Filament: Sunlu PETG White Layer height: 0.28 (0.4 nozzle) Wall loops: 3
A bin for lip balms. Printed with a 0,24 mm layer height.
A replacement cover for broken bottlecap of chinese Eucalypthol Balm bottles. Knurled design not working very well, advice appreciated. Modelled using autodesk Inventor, using coil function. Dont use supports, print flat. Like and Share!
I was tasked to create few utility storage and organisation dothats to our hall. So I created them wth the same patrern to make the room little bit more “thought through”. This is just simple placeholder for lip balms we use. The set The…
Držák na velký balzám na rt y a nosní kapky Nasivin Holder for big lip balm and Nasivin nose drops
This model is a functional, themed organizer designed specifically to hold 1oz circular tins , such as those found in the Viking Revolution Beard Balm variety packs. The design features a curved, nautical-inspired hull that allows for…
I always keep lip balm in my car. when it gets very hot outside, if left on its side the lip balm will melt and ooze out of the cap making a mess in my center console. I made this simple lip balm holder to keep it upright so the melted…
!!!DISCLAIMER!!! This is not the same as the original part, use at your own risk. INFO Recommend print using PC or ABS due to the high heat environment inside the kettle. Use 4 wall and 100% infill. The holes for the pin might need a bit…
A simple little uni-tasker to hold a lip balm tube upright for easy grabbing. I put felt feet on it and inside the hole so that it's quiet to interact with at nighttime.
Never lose your lip balm again with this universal lip balm keychain holder! Designed for everyday carry, this compact clip-in holder keeps your favorite lip balm securely attached to your keys, bag, or backpack so it’s always within…
Replacement for a lost cap. Clicks firmly into place. Used print settings: Filament: Sunlu PETG White Layer height: 0.28 (0.4 nozzle) Wall loops: 3
This model is a functional, themed organizer designed specifically to hold 1oz circular tins , such as those found in the Viking Revolution Beard Balm variety packs. The design features a curved, nautical-inspired hull that allows for…
A simple gridfinity lip balm holder that can hold up to 2 19mm diameter stick
2x1 Gridfinifty holder for balms and other products that are 70mm x 30mm or smaller
This is a stand to display your collection of lip balms. It was designed with the ones of the brand “Labello” in mind, but should work for most other brands as well. There are currently only two types of stand, but I can easily make more…
This is just a simple holder for a stick of lip balm that can be attached to the Rivian Customizable Console Organizer.
Wedge heels inspired by Balmain, featuring a bold silhouette, luxury design, and high fashion aesthetics.
I got tired of always taking the cap off my chapstick and discovering that the contents had been forced into the cap, inadvertently shortening the effective life of a tube. After applying this to your tube of lip balm, operate it by…
Nivea enshittified the plastic for their lip balm, so now it falls apart in your pocket. This is a replacement part that sits snugly and is more durable. Simple model, useful tool.
Compatible with the usual lip balm tubes. Fills 40 at a time. Click fit. Recess on top surface for containing excess
Save those lip balms from getting lost or misplaced or worse, left on your pocket and end up in the laundry machine. Stop losing those expensive Lip Balms! Store them on this magnetic holder for easy access. Prints under 2 hours @ .15mm…
I lost the cap for my lip balm stick so I just modeled and 3d printed a new one. Inner diameter: 17.5mm Outer diameter: 18.9mm Height: 24mm I have also included a fusion360 file if you need to make any adjustments.
A Vertical Lip Balm Holder you can stick onto something with double-sided tape. I made this for my car so a tube of lip balm does not lay flat and melt at a funky angle in the summer. It's also handy to have a specific place for lip balm.…
