Counting matching models…
This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic baseplates using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so you…
🎥 Watch the video tutorial In the video, I explain: -How bridge flow and speed affect the print. -Why more flow gives smoother results. -How to tune these settings in OrcaSlicer . -How to combine this with Tree Supports → “Critical…
UPDATES: 12/2021 "A" parts for small servo "B" parts for big servo 03/2024 Improvements on the following parts: Body L and R, Case Holders, Gear 1 and Rear Frame R. 05/2024 improved design, ready to print plates, new parts and updated…
All printable parts for your Basic Board + PSU Add-on. Basic Board + PSU Add-on is needed only if you have Advanced Filtration System or/and White LED Strip Add-ons You have the option to print two different holders for two different…
Cylinder r = 100 mm h= 100 mm Can be used as skirt with 0% infill, 0% top and bottom layers and 1 perimeter.
Basic Toolbox – Creality Ender 3 V3 SE This toolbox has been adapted for the basic tools that come with the Creality Ender 3 V3 SE 3D printer model
***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…
Basic profile containing over 9 sizes, new improved links and lock, easy to print with no bridges in the links. This is the standard, non dragon or unicorn bracelets, completely new and improved, with new facial designs, link design and…
This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic undivided boxes using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so…
CAN LID – BASIC SERIES 🥤 A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆 One-finger…
I wanted a skull that kept the sharp robotic angles of the original head, so here it is. A basic spooky skull for the Dummy 13. I include two versions, one with the original jawline and one with a slimmer jaw.
Simple case for iPhone 13 Pro Prints easily with PETG or PLA
NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…
Hi! This is another Electric speed loader for Airsoft. This is the basic version. You can also get the upgrade package here: https://cults3d.com/en/3d-model/game/airsoft-electric-speed-loader-upgrade-package-to-advanced-version It counts…
I loved a similar wooden construction toy when I was a child. However, as more and more components break and my children show a lot of interest in building and constructing, I have started my own printable system. The files in this set…
These models of high-detail metric screws with a 3mm diameter are available in various lengths of 10, 12, 18, and 20mm. These screws are very common and are also used to assemble Original Prusa Printers! Warning: Do NOT use these screws…
Recommend printing in PETG Personally I printed it Gyriod with 20% infill and 5 layered walls for extra resistance. FOLLOW Radical Maker’s instructions for more details. ***DO NOT put full strength into the clamp it will possible snap…
3D Basic geometric shapes Shapes: - Cylinder - Prism_triangle - Prism_right_triangle - Prism_Pentagon - Prism_hexagon - Prism_star_5 - Prism_star_6 - Cube - Cube_hollow - Cube_rounded - Cube_rounded_hollow - Sphere - Semi-Sphere -…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to all my files in one…
Wheel Chock for car. Should work for most car tires, not recommended for truck tyres. No supports required. Recommended to print at 0.35mm, resolution is not really important. Do not use this for safety.
A nice simple test for the MMU2 (or MMU2s) which uses all five filaments. Gcode included for MMU2s and MK3s Print instructions I printed these at 0.2. Gcode included.
update 5th of April Finally, the highly anticipated update to the base tile! The two part improvement was easier to print, but needed glue for good usability. I have been looking for a better solution for a long time and I think I have…
🇷🇺 Добро пожаловать в Россию Welcome to Russia Important Note: Artemio García started creating this model for MiniWorld3D several years ago. When he finally finished it, the war between Russia and Ukraine had just started. We decided to…
CAN LID CLICK – BASIC SERIES 🥤 A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆…
r = 35 mm h = 100 mm
I liked the design and idea, but I definitely don't like supports and multi-part designs unless necessary.
16 different insets which can be used with my basic tile. Update 8th of February 2022 added two new insets as requested by an excited user of my design ;) (1 straight, 1 long corner & 1 straight, 2 long corners) Pick the ones which you…
There are many Nissan emblem designs from the CAD community but this one is mines LOL! *NOTE : When printing this design, you WILL NEED SUPPORTS for the “Nissan Emblem - Body”. For both the FDM, FFF, and SLA printers you will need…
Since a lot of people liked the incremental rotatable version, I made a basic version that rotates the full 360 °
I always print the Dummy in 250% now that I did it once and loved it. It's basically Barbie sized and allows for so much more detail in both the Dummy and the accessories. I have been asked a number of times now about sizing of the Dummy…
This a generic mount for a 35mm top hat rail. This mount clamp snaps quite tight at the top hat rail and has a 10mm flat mounting base on top. You can easily attach different mounting cages to this base plate with glue. Update: I uploaded…
GoPro Mount (Basic Flat) - Print your own GoPro mounts cheaper (10g = $0.50/0.50 EU/ 12 CZK)! - TESTED: very resistant
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Since I started working on a dice generator, I would like to share one of my first creations from it. In the current state, it's still quite experimental, but the final dice generator aims to allow you to exchange every single side with…
Source code (designed in SolveSpace): https://github.com/nazar-pc/matx-open-test-bench It only has motherboard tray and support for 4 expansion cards. No I/O shield or anything else, has cut-out on the back for easier cooler and back SSD…
This project uses low temps, high extractions, slow speeds, and several other tweaks to remove oozing and major defects with this specific TPU filament. Make sure to have your tensioner screw as loose as possible and use a 0.4mm nozzle.…
Mini 13: Figurine System Compatible Melee Weapon Set, includes 5 weapon designs: Scimitar Shortsword Longsword Sabre Katana
🇻🇦 ¡Benvenuti in Vaticano! Welcome to the Vatican! The world has a new Pope, Leo XIV, and on this occasion, MiniWorld3D is bringing a major landmark of Rome and the world to our library. This entry is a highly-detailed model of St Peter's…
Two kind of hammers for kicking the marbles up to speed in your marble run! The 13mm version uses normal Gravitrax steel balls. The 15mm version uses the larger 15mm steel balls which are also used for the Gravitrax scoop. I ordered both…
Basic Collection This is a basic collection of a larger system available to be purchased here . I understand this system has been available for free for years. I greatly appreciate everyone's interest in this system and LOVE seeing…
This is my design of fully functional washers with built-in structural support. I created them for the FFF process to be printed using PETG or ASA material. Printed with the correct settings and materials, these washers are quite strong…
There is a new revision B of this project , with more pipe diameters and additional wall mount distances. Unless you like to print exactly this version of the clamps, please use the newer versions with an improved geometry. Check out the…
This collection of miniature figures, mostly around 32 mm scale (though Barthal may be a bit big for his kind), represents the standard pregenerated characters included in the BF1 Morgansfort multimodule for the Basic Fantasy RPG. It…
Need a basic cube but don't feel like installing 3D software or firing it up to make one? Here you go. This is a small pack of 6 primitive shapes for whatever you may need them for. Whether it be test cubes, or stretching the cylinder…
A horizontal loop inset for the basic tile. Note; this design is ONLY compatible with my 6 exit basic tile. The basic tile is compatible with gravitrax. You’ll need this part to put the inset in:…
This is a small sample of some of the simple shapes. This could be used for teaching children basic shapes. These models can also be manipulated to build other models. These are just made from the Tinkered basic shapes tool to save you…
I needed 3mm flat inserts for a pair of boots to fill space under other third-party insoles. I made these and sized them to match the original inserts. Paired with the new insoles, the boots are a great fit. Now that I've started this, I…
Updated October 1 2023: Made a deep basin that will fit all of the sieves so you have a proper size container to sift into without making a mess. Added because as I've used the sieve with Walnut shell, tumbler shot, porcelain beads, etc…
Fits standard Rocker light switches and Rectangle outlets Basic design with no embellishments for a single gang outlet Print your outlet's cover in your favorite material Don't pay 'big' light switch, another $0.75 ever again. Probably…
A basic wind turbine design that can produce enough electricity to power a small LED light. I manged to print all of the parts on a stock Ender 3 using PLA, so it should print fine on any printer out there. How to print: Material: PLA,…
It be a bracelet A bracelet it be Turn your ears Listen carefully, This small bracelet Won't fit you If not made out of tpu! If you don't have tpu filament, the first version of this bracelet is not for you. Something very stretchy must…
Amazon Alexa Echo Dot 3rd Gen basic wall mount. Secure with two No6 countersunk screws
I created this colorful contraption specifically as an education tool that can be used in classrooms and with younger children to help teach the basics of gear mechanics. It features several common types of gears, including spur, helical,…
Der Ersteller der Dateien übernimmt keine Gewähr für die Qualität oder Fehlerfreiheit der von ihm veröffentlichten Inhalte und haftet gegenüber Dateinutzern nicht für Schäden, die durch deren Nutzung entstehen.
Chasis: https://www.printables.com/model/447947-chassis-110-adaptable-dks-basic Componentes: - Correa 70XL 6mm: https://s.click.aliexpress.com/e/_oEPIqnk - Acople hexagonal: https://s.click.aliexpress.com/e/_oFc9noi Guía de construcción:…
This is a Cryptex similar to the one shown in De Vinci Code by Dan Brown. The Main shaft holds all the letters gears in place. The letter gears can be changed around to produce a different combination. There are almost 12 million…
UPDATE: The reported issue with the bridge has been solved. Additionally, you can now downland both right to left and left-to right orientations of the bridge. This collection of GraviTrax Junior-compatible tiles contains replacements for…
According to the manual, kids will model simple mooring cleat, which will help them to learn how to tie cleat hitch. After printing, mooring cleat can be screwed to the wooden base with two screews.
Hello, this is an automatic fruit and vegetables washing basin. Super practical for everyday use. have fun with the model!!! Model created by lwx007
Material: PLA, PETG Nozzle: 0.4 mm Layer height: 0.15 - 0.20mm Infill Density: 20% this is fine for strength but if you want a yo-yo that has more weight you can up the infill to your liking Wall Thickness: 2.0 Supports: No Build Plate…
I wanted to print out all my favorite buildings of Paris for my youngest, but realized there wasn't a detailed enough version of Sacré Cœur, so I grabbed an architectural facade off Sketchup to get the layout right, then removed the photo…
Version 5 Features: SNAP TOGETHER DESIGN MOVING SIDE-RODS ROTATING WHEELS MAGNETS FOR COUPLING TRUCKS (OPTIONAL) NO SUPPORTS FITS COMMON KIDS WOODEN TRACK (20mm between wheels) WORKS WITH THOMAS WOOD SERIES, TAKE ALONG, AND TAKE N PLAY…
-The minimum required for the ATX tray are models Core and IO to hold the motherboard and pci cards (6 motherboard screws, or with the extensions, 9 motherboard screws). -8 total models snap-fitted and then secured with a total of 25 size…
Made this for PLA, all other models i saw were for TPU. Or use TPU idc
18mm x 18mm x 13 mm Basic Keycaps with angles. -0,0° -2,5° -5,0° -7,5° -10,0° -12,5° Same Keycap from the Mando Keycap i made.
some easy-to-print, basic tweezers for optimum strength print with enough perimeters so it turns completely solid in case you need flat surfaces at the tip, you can fold a piece of sand paper so it's double sided and carefully pull that…
This basic bottle opener is designed to fit a 10 (euro) cent coin. You can either print the slot using basic supports or use the “pause at height” feature of the PrusaSlicer. When using supports for the slot, just remove them afterwards.…
Every metric nuts from M2 to M20.
This is a lane switcher which causes half of the balls running through the marble track to go left and the other half will travel right. It consists of to parts which can be clicked together to prevent them to be separated when storing…
Basic cover for Huawei P30 Pro. Want to send a tip? Paypal: https://paypal.me/cubikspot BTC: bc1qp7c9nllsetqf73zu76wrwxcrrks4ctpp04rnpe ETH: 0x1709A6042EAF5D36f9F4B3C3Fb4B9BC2dF9EEeaf LTC: ltc1qxwkvr2c6drmg9vdgkdcwrgk6lw4h07pnhfuxwt Print…
I was very surprised at not finding this here. It's just a grip that slides under your wood/gypsum etc panel to help lift it. I made it to fit a 24x24cm bed, no support needed. Rare thing that happens: it's perfect (at least for me) on…
This is a case I created for the Samsung Galaxy S24+ (Plus) model. It is a simple, very well fitting case, with clicky buttons. Button pad should be glued inside of case with two very small dots of super glue at the very ends of the flat…
FOLDX - Foldable Multi-Tool - Single tool holder Join the new FOLDX community Facebook group for makes, upgrades and help. First designed this first as a foldable utility blade holder with inspiration from the classic Swiss knife folding…
Sometimes you just need a place to throw a thing, so throw them in these boxes!
My basic case for the Switch I used as a base for a TOTK case. I figured I'd release the base model for anyone to make their own Switch cases with. Includes cutouts for usb-c, back intakes, all top ports and vents, and extra cutout to…
This is my design of a fully functional, print-in-place hinge – especially created for the FFF process using PETG or ASA material. It is a high-strength design with the series number 300. It is suitable for heavy furniture doors and lids…
2 collectors which can be used in my basic tile to create new marble tracks. One is the drop collector, which catches the ball from a higher level, redirecting it to a rails to continue it's journey. The other is the endpoint of a marble…
A residential building remix for a generic Modern or SciFi settings, at 6mm scale. This is a substantial remix from the original. This set is intended to be compatible with the other 6mm SciFi terrain sets I have released. Search my other…
Decided to move my better brushes out of a jelly jar. Simple holder to hold paint brushes with the tip pointing up. Simple quick print. I usually print utility stuff like this in draft mode since I'm more concerned about functionality…
This drop tube collects the balls and guides them down through the tube. The exit of the tube is compatible with the marble rails (see my other designs). Note; this design is ONLY compatible with my 6 exit basic tile. The basic tile is…
This simple, basic, ordinary, rectangular plate can be used for all sorts of things. It has a two-hole inserts behind the plate in order to mount on a wall from two nails as well. All four sides of this plate are bevel too! When printed…
🇵🇱 Witamy w Polsce! Welcome to Poland! This model was designed by Daniel Muradás. The Church of Our Lady Assumed into Heaven (also known as Saint Mary's Church; Polish: Kościół Wniebowzięcia Najświętszej Maryi Panny, Kościół Mariacki ) is…
The original model by FruitieX was great but I found that my Amazon Basics AAA and AA batteries didn't fit so I changed the couple battery size parameters in the Fusion file to get the fit right. Posting both the inserts and the base, I'm…
This is one of the libraries that I use in several of my projects. I don't want to upload it with each of them again and again. This OpenSCAD library provides some additional basic shapes. It also provides some standard shapes with…
Large Imperial Basilica ruins for 6mm/epic scale tabletop wargaming My other Epic Scale Terrain projects: https://www.printables.com/@fractalnoise/collections/1040124
This is my first try at creating a mold for a concrete pot. It is almost the largest mold you can make with the Prusa I3. You need to use a mold release. You can get special concrete mold release, or you can use most of a can of non-stick…
After getting a request to transform a design into a printable object I've created this trampoline. It's based on the design of Christopher Jeschke which had the smart idea to use a balloon as base part for the trampoline. I've optimized…
Parkside X20V basic Adapter Not much to say here. If you found this, you know what you need :) Disclaimer: Those batterys pack quite a punch. If you short them out or start a fire using this design, I can't be held liable. Please print…
Remix from the Valorant tactical knife from HEISENBURGERFR, i designed it to be printed in different part so you can paint the blade and the grip easier, also it looks a little bit more like the real one because of the bigger bolt hole .…
There are many great carabiners on Thingiverse but I wanted to create my own. This is what I came up with. It's pretty strong (I haven't been able to break one yet) and has a nice spring action on the closure. I have only printed this…
Track piece to extend this circuit. Short and medium rail have the same length that original parts. Half short is, as it sound, half the size of the short one. It usefull to fill gap in some cases. Print instruction: Supports needed for…
A box organizer for the game Hitster. The stand can be used for holding a smartphone, the phone can simply be put down and the cards inserted at the bottom of the stand. In my case it is an iPhone 13 (should also fit an iPhone 14).…
The first depiction of the Tortle in the Basic D&D Creature Codex. Interestingly this Basic D&D Book was published after the release of 2nd Ed AD&D. If you want to help me keep making free models or to tell me what I should make next…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Print this model to fine-tune and test your slicer settings and get rid of annoying stringing. This is the original, Basic Stringing Test by Loohney with over 160,000 downloads on other platforms. Angus from Maker's Muse has an excellent…
Open the STEP files to start. All Skadis basic hooks are located at y+. Add your constructions at y-. NEW: Struts version to print without supports .
A basic model for quick and repeated printing. Key attribute is the blade which has been blunted so kids can play safely. Printed on a MK3S+ at 0.2mm quality, PLA, no supports, and 15% infill.
Some different magnetic gauss cannons to use with the basic tile to create some spectacular marble tracks. Note; this design is ONLY compatible with my 6 exit basic tile. The basic tile is compatible with gravitrax. You’ll need this part…
A basic camera lucida, made with just 4m2 bolts, a piece of glass and mirror and a stand of your choice. mirror: 1.5mm thick, 35*49.4mm glass: 1.2mm thick, 49.4*49.4mm Dimensions based off a set of slide glasses I had. The “lamp…
![BUILDfinity construction play for kids // Konstruktions-Spiel für Kinder [BASIC-SET]](https://media.printables.com/media/prints/689810/images/5419730_f64e8cc2-1d55-47b6-9e6b-2c5134cba6e2_07046611-77fd-476f-8e21-a513fe78a163/buildfinity_2.jpg)
