Counting matching models…
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
This is the new and very much improved version of the BC-304 class from the show Stargate. Originally I intended to release it as a remix of the original one, but the changes are quite large so I decided to post it as an entirely new…
A simple and strong clip on webcam mount for your Elegoo Neptune printer. Supported Printers (please compare the below image for other printers) Elegoo Neptune 3 Pro Elegoo Neptune 4 Elegoo Neptune 4 Pro The printer needs to look like…
Camera or webcam mounting screw based on the dimensions of a 1/4" - 20 UNC fitting. Designed to be easy to print, no supports needed and will print at 0.20mm with minimal retractions to help provide a cleaner print. The screw is based on…
I was inspired when I saw a similar design online but couldn't find an STL anywhere. I have a job interview today and wanted a way to act happily towards the camera while dealing with the anguish of making eye contact with an inanimate…
A solution I came up with for opening up the heat sink fins on the BC-250. This idea was inspired by the tools that are used for straightening AC radiator fins. Recommended Usage Instructions: Please be careful . The fins on the heat sink…
A simple but effective webcam mount designed specifically for the Ender-3 S1. Simply slides on to the X gantry, no tools or disassembly required. Also included is a threaded knob to match any webcam with a tripod mount (1/4-20 threads).…
The Shell Case is a simple and effective solution for organizing cooling on the ASRock AMD BC-250 module. This snap-on shell allows you to mount a single fan quickly and securely without modifying the card or its case. The model requires…
I modified an existing project. I added a fan mount on the front of the BC-250 board and also modified the case front to make everything fit. The idea was to not destroy the fins of the original BC-250 cooling. Additionally, I recommend…
This is my model of BC-304 from Stargate. I named it Ares. It is roughly 60cm long and arround 3 kilo. This is very complex model kit consisting of hundereds parts. I printed and assembled it over a month. The assembly may be kinda hard…
Update 2023/08: Ausführung ohne Zwischenclip für Wickeltasche hinzugefügt. Adapter hinzugefügt (stärkere Ausführung M4x35 Schraube)
The BC-250 board model features accurate proportions and dimensions. All mounting points precisely match the real board. You don't need to print this model, it's just a sample for body modeling.
Micro:bit case for the second version of the board Supports the new features of the card: - microphone - speaker - Touch logo Remixed from https://www.thingiverse.com/thing:3028078 and https://www.thingiverse.com/thing:3511591
Cap for 1000l IBC tank for garden hose with quick connect system. Uzávěr nádrže 1000l IBC pro zahradní hadici se systémem rychlého připojení.
I'm too cheap to buy a real BCM, so I made this. Mounts to Mlok rails, and the grip angle is 82 degrees.
Barrel Mounting System (designed to print at .12 layer height) The Rev 2 EX BCAR system is designed with performance in mind. The new mounting system implements Extra Inch Technology®. The new barrel mount increases average velocity to…
SUG-BBC (Big Black Case): Sub-21L DIY 3D Printed PC Case that fits full size ATX components. This case can accommodate high-end gaming components for maximum FPS and cooling. Designed for water-cooling with high-wattage Intel or AMD CPU's…
UPDATE The camera mount was working but when there were fast short movements with many direction changes it started to wobble. I added a V2, it doesnt look as nice but it is more stable. If you are into timelapse videos then you…
A simple, toolless case for the BC250. Who knows how bad the thermals are! Printed in PLA, it's probably fine. The build assumes the center fins of the card have been opened up to accept a fan. BOM BC250 APU Board Flex PSU with…
RC SCALE EXPEDITION OFFROAD CAMPER I recommend following the Build Guide when assembling. The list of necessary hardware is in the Build Guide. Please contact me in case of questions or any confusion. If you like it, you can [buy me a…
Hi Folks! Thank you for your patience. It’s been quite a long journey developing the FlexATX version. I had to wait for another BC-250 board to arrive because my previous system suffered a brownout after I accidentally caused a short…
IBC tank reducer from 64mm to 1" inch + new 5/4" inch version available redukce na IBC nádrž z 64mm na 1" coul + novinka na výběr i verze 5/4" coul 5/4" version not tested, please give feedback verze 5/4" není otestovaná, prosím o zpětnou…
Model BobCat. Jen tak pro radost dětem i vám. Návody na stavbu v CZ a EN Stahujte, remixujte, bavte se. MLmodel BobCat model for your little ones. Just for the joy of the children and you. Construction instructions in CZ and EN Download,…
Gamer case for your BBC Micro Bit Features: Easy to print Easy to handle Allows access to all the board features You can attach the battery box in the back. https://www.prusaprinters.org/prints/20132-case-for-bbc-microbit Print…
I have taken ALL of the work out of mounting your Logitech C270 to your Ender 3 V3 SE X-axis. You don't need to do ANYTHING other than have this camera (or camera with similar mount), and this Ender, then just print. No hardware? No…
[ENG] A small Bobcat with freely rotating wheels and a moving shovel printed in one piece. It is printed in the "on its side" position so there is no need to add supports. For functional printing, the first layer and flow must be properly…
I designed my own webcam mount for my Ender 3 S1 Pro. I wanted the cam drive with the Z-Axis. You can use the holes for different positions and cams. I printed it in black Petg and its worked perferct for me . Hope you enjoy. Today…
This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…
Update: 4/07/2026 Alert! PRO Version 2 Incoming: For anyone looking to build the PRO, please wait, I have Version 2 in coming, its fully complete, and much better than the first version, the case is now unified and supports…
I created a stand for my Logitech C920 that resembles The Rocket Side Spool mount that I am using. It slides into the left side rails of my Ender 3 V2 (should also fit Ender 3/Ender 3 Pro) and has a hole that allows you to screw a 1/4-20…
This is a simple webcam cover. There are a lot of models on Thingiverse, but i just couldn't find one that printed well and that was usable, so I designed this one. It's easy to print at 0.2mm , works well, has enough surface to fix to…
Hi, this is a remix of https://www.printables.com/it/model/132242-zoom-phone-tripod/files for fit my webcam on an adjustable tripod. I've added a ¼" screw on the base. Just print 3 plain legs, 1 ring and 1 base infill 20-30% no support…
Z-axis Webcam Mount for the ELEGOO Neptune 4/Pro 3D Printers. Please use a Tripod Screw to mount the webcam.
BC-250 Case that uses a standard ATX PSU. Requires 8 coarse thread PC screws, 4 for the PSU, and 4 to hold the case together. Leave the IO shield bracket on but remove the tiny metal bracket on the front for this case. The power button is…
Update: 04/07/2026 Version 2 incoming, please hold off on printing this, the new one is better, I will be uploaded soon, I'm just short on time, but Ill try and get it up before the end of the weekend. Update: 27-03-2026 Ive added a…
Also required: CamScrew-10mm.stl screw made by @Vector3dArt to attach the webcam.
Introduction The Minimalist is a simple to print and super compact case for the BC-250 board. It took a lot of iterations to come to the current design : compact (5L), cheap and easy to build, no compromise on performance, active…
Presentation This is an ATX mount and its I/O shield for AsRock BC250 board. It fits ATX, micro-ATX and most probably ITX cases. Requires ~31cm length from back to front. 2 variants are available: High-profile variant (22mm high) Active…
This is a controller shaped case for the BBC Microbit with a detachable battery holder that fits the standard 2xAAA (JST-PH) battery pack for the Microbit. The original design for the controller case was done by Guillermo Melantoni…
Most of the airbrush holder on the market can be installed beside you at your desk. This is the case of the Iwata holder and other 3d printable models out there. I designed this one to be installable at either the back end of your desk…
Updated 2023/11/06 - Added a versions to support a M6-1.00 x 10MM Hex Head Cap Screw Bolts This is a Remix of Tripod Base of the "Zoom Phone Tripod" to allow for the attachment of a 1/4" x 3/4" Stainless Steel Hex Bolt. I first tried the…
This is a Hot Shoe / Cold shoe mount to mount a webcam on top of a camera. ¼-20 thread tripod mount. I used this to mount my webcam for Octoprint on top of my DSLR I'm using for Octolapse within Octoprint. It's very light duty even when…
Model is tight fit. Recommend 102-104% scale for easy fit, if you don’t know use 104 as your bolt will always fit. My setting was 102% for a fit without calibrating filament I leave my BCG out of my gun for storage as well as swap between…
This is a cutaway bolt carrier for an ar-15 for leaning purposes, this allows you to see the inside of the bolt.
My custom Asrock BC-250 case designed to be compact and portable without compromising on cooling or function. Multiple themes are included as well as a blank case for your own themes. NOTE: This case will require some mild soldering and…
This is a remix of the original TD14 design with more supports on the vertical areas, I found that after about 50mm my print looked VERY ugly. This was a quick mod and isnt meant to be pretty, only functional. This will also allow the use…
I added the straightener teeth on both sides because they tend to wear out with use. This way, a single print serves the purpose of two.
Enclosure for raspberry pi zero with HQ camera (flex cable inside). Feel free to adapt the model to your needs. The image quality of the camera is beautiful, and I'm happy with the result. I found a project called ShowMeWebcam, which…
The 3D surface provides extra grip while the base remains thin and playable. Whether you're riffing through a thunderous solo or just want to show off something sick on your keychain, this pick brings both flair and function. Print it in…
Simple easy to print webcam holder for Ender 3 v2. The camera and connection to the printer should fit snugly but not impossible to fit. I have created two models each with different properties. The Andersson mount is closer to the middle…
A Skadis Webcam Mount for webcams with ¼" UNC thread. Print the Screw with 0,1 mm Layerhight, without supports. The mounts are printed with 0,2mm Layerhight and supports.
This is a "Slide-to-open" friction-fit webcam cover for the Logitch c922 webcam. It prints in three pieces and "snaps" together. It does not require any glue or other adhesives. It is also sized so that it does not cover the blue…
Plain barrel mount for the “ex” bearing centering and rifling devices. This piece comes ready to print, I would recommend a brim at least on the main portion as you will see there is very little surface touching the bed. unfortunately it…
This is a simple one piece webcam mount for any printer using 40mm box section frame. It has been tested on the Elegoo Neptune 3 Pro and works well for small webcams with tripod mounts such as the Logitech C615 No supports required. For…
This came about because of a dream, not my dream but a wonderful dream. Kelly Cline @kcline had the idea of having a device that would be able to launch some peanut butter cups so that someone would be able to catch them from 10ft away.…
bc250 to amd cpu cooler mount recommend to print in ABS. damage may occur from melting if not printed in abs. PETG may work, but I would not recommend it. do NOT print with supports, as it will fill in the mounting holes! recommended to…
material: nut, hose attachment -ASA, seal -Flex wall layers: 3 infill: 30%
I made a simple mount for a camera for the Elegoo Neptune 4 and Neptune 4 Pro. It slides into extrusion rails and uses an oversized screw to lock it in place. You will need a screw for the camera which you can find here…
Didn't seem to find a cover for the C920 so made one with inspiration from another user. Recommend using the improved version of the cover which fits better to the camera. Logitech C920 privacy cover improved by siamigo | Download free…
Remix of model. Simpler outside model, easier to print, no supports need it. Printed in PETG, 35% infill, 4 Walls.
Eine Webcam Befestigung für die Logitech C270 Webcam. Es wird keine weitere Schraube benötigt! Erstellt für https://www.printables.com/de/model/3407-articulating-raspberry-pi-camera-mount-for-prusa-m Die auf den Bildern verwendete…
A 3d model of the amd bc250 board, modeled to aid in the design process of a case. Not actually meant to be printed. Including a link to the bc250 community discord https://discord.gg/8eZfFWhczz
Based on the design (https://www.printables.com/de/model/392102-elegoo-neptune-3-webcam-mount) I made a mirrored version and made the contact surfaces a little thinner for a better fit. Fits the Elegoo Neptune 3 and 4 Series (incl. Pro /…
Three of the most basic forms that crystal structures form in materials. Supports are necessary. Models in the image were printed at 50% scale. Print instructions 0.2mm layer height 15% infill Supports Necessary
///////////////////////////////////////////////////////////////// Update: 2/10/2026 Uploaded files for the Thermalright 6.86" LCD Display Link to the product: https://link.amazon/B0j0CNDgn Link to the software setup for Bazzite:…
It's my “quick and dirty” Tinkercad remix of the great original design by rayjizza: https://www.printables.com/model/20112-gamer-case-for-bbc-microbit The case is now compatible with BBC micro:bit v2 (and v1 as well). The layout of…
This is a remixed version of the great model made by SilentWoof on thingiverse with a few extra bits included. I've reshaped the main mount body to provide a cleaner look with less sharp corners. The optional ball joint is remixed from…
Adapters to various IBC output threads and sizes to 1" thread pipe so either ball valve or hose pipe can be attached.
Thanks to Rolfiklein for the IBC adapter. I inserted an outer contact surface for an O-ring 45x5. Then the O-ring can no longer slip under the thread Printed with PETG
This is a box for cotton swabs. At least the ones that can be purchased in most parts of the EU and Germany. It fits cotton swabs up to 8.6 cm in length. The cotton swabs I tested were 7.6 cm long (German once). It has a screw cap and is…
Intro This is a simple case/holder/cover for Yubikey 5 series USB A and USB C. Note that the versions do differ: so print USBC for USBC key and not USBA for USBC key! Info It can be printed without supports. I printed it with 0.12 layer…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … I wanted to mount my webcam Logitech 920 to the Elegoo…
Nice and simple two-axis wall mount for old Logitech webcams for use with octoprint. 3M screws and 3m nuts are used to assemble the wall mount. It's screwed with standard 3,5mm wood screws to the wall. The camera plate is designed to be…
Mi recomendación es que es más fácil de imprimir la cabeza en dos partes.
My Dell P2419HC monitor has a so thin bezel, that my C270 Logitech hides some parts of the display. This tool increase the space between the bezel and the webcam. Probably useable for many other monitors and other webcams. Use the 17mm…
This is a remix of the "Longer camera holder for FLSUN V400 v3" with an added m6 stud for camera mounts.
Webcam mount for playing tabletop games with my friends remotely. Uses the VESA mounts on the back of most monitors, has compatibility with 100mm or 75mm options. Webcam mount.stl" if you are able to use a screw to attach. The current…
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
See the images for the exact model of webcam used unscrew the webcam from the base and screw it to the webcam mount using the included nut remixed from https://www.thingiverse.com/thing:5154496
CZ: Jednoduché sítko na 150mm hrdlo IBC nádrže. mřížka je 2x2mm a šíře rastru taktéž 2mm. Ano kruhové části by mohli být kulatější ale více než o tvar mi šlo o funkci filtrace vody z okapu do nádrže abych v nádrži neměl listí což by…
This is a small and tiltable mount to mount a Camera to a Flatscreen monitor. The mount will fit monitors between 14.5 and ~40mm in thickness, as long as the top, front and back are relatively flat surfaces. The mount is just 40 mm wide,…
I needed a big number for our house, so I decided to make a whole collection of numbers, so everyone can use them. I wanted numbers with serifs, it is based on the beautiful Noto serif font. Numbers are 170mm high, and 10mm deep. If you…
I recommend following the Build Guide when assembling. Please contact me in case of questions or any confusion. The model is provided as is. The necessary tools must be available for assembly. If you like it, you can [buy me a coffee] .…
This is a wallmount to put your E-bike's Bosch charger 36-4-230 BCS220 in. My model was based on @JOGIAREA design but it seems the 2 and 4 amp versions differ a lot. I practicly had to rebuild the whole thing keeping a few visual…
This is a 3D CAD model of the AMD BC-250 card, designed specifically for use as a reference when building custom enclosures or mounting brackets. The package includes the standard export files as STL and 3MF for easy integration, as well…
A bit of an experimental BCAR with agressive twisting for sticking inside DZ Muzzles or on the outside of 15MM OD aluminium tube
Since I don't have a Microsoft LiveCam 3000 HD and only a webcam with ISO 1222 / DIN 4503-1 / 1/4-inch camera thread. I couldn't help myself and built this model. It is further away from the print bed and elevated. Two different ISO 1222…
I have created a grip which is exact (scaled a few milimeters up) shape of Game Boy Color
This is my version of the original BC-303 version of Daedalus made for the 8th season of SG-1. This version was unfortunately scrapped for the BC-304 Daedalus Class but we can actually see the top view of the original concept in the…
This is a hinged privacy shutter for a Logitech C615 webcam. The shutter can be raised when the camera is in use and lowered to ensure (visual) privacy when it is not. The mount features cutouts for the 'in use' LED and microphone, and…
DN150 lid for IBC containers, with an added ¾" connector (around 26mm outer diameter). The added 3mf file has a negative part to ensure the hole, make sure to open it is Prusaslicer/Orcaslicer if you cannot see it. I am using the existing…
ONLY FOR PEOPLE WHO OWN 3D PRINTER AND/OR ENTHUSIAST WILLING TO TRY NEW STUFF MAKE SURE ALL VRM COMPONENTS HAVE INDIVIDUAL HEATSINKS (ALTERNATIVELY STOCK HEATSINK CAN BE TEARED APART AND USED FOR THAT IF YOU KNOW WHAT YOU ARE DOING :-) )…
I modeled this from the dimensions of my BC-250. Some dimensions might be off slightly due to inconsistencies in I/O soldering and PCB manufacturing but this should be great for designing cases or accessories. I left the I/O mounting…
A cost effective way to make a round frame pool winter cover from 3D printed models, 40 mm ht pipes and a fitting tarp. The goal is to have a cover without sagging places where rain water can accumulate. Its cheaper than pool pillows and…
Wandhalterung für Bosch E-Bike Ladegerät 36-2 BCS230 Befestigung mittels 5 Senkkopfschrauben. Weitere Ideen besuchen Sie: www.jogiarea.de Wall mount for Bosch e-bike charger 36-2 BCS230 mounting by means of 5 countersunk screws. For more…
Would you like your Dart Zone Max Outlaw to be more accurate, and look awesome while doing it?? Look no further than this drop-in replacement part that uses the “Ex” BCAR design by Epicxxx. This is installed just like the rest of…
This case has slight changes to it and is based off of Digital Juice 's. This update fits the LD2410 with or without dupont wiring and the USB C version of the D1 mini ESP8266. I included a text file of the .yaml file that is working for…
This is a camera mount that attaches to the X-Axis of an Anycubic Kobra 2 series printer. This way the camera will always be at the same relative level with the print head. The mount is designed to be modular , allowing the usage of…
This is not a weapon, nor a functional part for any weapon. I designed this to aid in storage of my extra uppers by functioning as both a dust cover and a solid block to keep the bolt carrier group from falling out. I've seen commercial…
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
