Counting matching models…
I needed a big number for our house, so I decided to make a whole collection of numbers, so everyone can use them. I wanted numbers with serifs, it is based on the beautiful Noto serif font. Numbers are 170mm high, and 10mm deep. If you…
A hanger for B.C.D / Wing-Backplate, and other SCUBA gear. Designed after the Subgear design, that I can`t find anywhere anymore. The design also includes a mount for DIN regulators. I have included both an un-split version, for those of…
Chain ring guard for MBT/ATB cranks (Shimano/Sram etc) having 104BCD (bolt circle diameter). Mainly intended to protect your trousers getting dirty from the chain. Suitable for 32 to 34T chainrings. Works wel when converting from 2 or 3…
I designed this so my scanner could stand up on my desk without fear of it crashing about. I added some rubber feet to the bottom for great traction. It's tippy if you try pressing buttons but you can press one finger on the stand below…
I designed this cup holder mount for my Chevy Bolt so I can listen to my Uniden BCD436HP scanner while driving. It cants the radio at an angle and the plug is a nice snug fit in the cup holder. The Bolt's cup holder is 81mm (3 3/16")…
Tool for gauging the Bolt-Circle-Diameter of a 5-arm crankset or 5-bolt chainring, with even hole spacing, featuring the most commonly found BCDs. More info about BCDs can be found on Sheldon Brown's site here . Print settings are fairly…
This is a desk stand for the Uniden BCD436 Scanner. Print Settings Printer: Monoprice Select Mini V2 Rafts: Doesn't Matter **Supports:** No Infill: 20% Category: Gadgets
A quick release buckle for your BCD or Tec/Sidemount Harness. This buckle offers a low-profile design that reduces bulk while maximizing security. It’s precise locking mechanism ensures that once you’re clipped in, you stay in, making it…
Since the tool made by a popular blue bike tool company was discontinued, I designed my own BCD chart with additional standard measurements the orginial tool didn't have. To use it, put the two pointy tips in two adjacents chainring bolt…
Adapter that fits onto the dump valve of a 2024 SCUBAPRO Classic BCD. The idea is to attach the adapter to the shoulder dump on the BCD, connect a garden hose, fill the BCD with fresh water, and then remove or open the lower dump valve,…
Similar to my other stand, this one is for the UBCD396XT Uniden scanner. It is narrower in two dimensions and taller to better hold the scanner in place. Simply to print, give it 3 walls for sturdiness otherwise its a pretty easy print.
Replacement for lost scuba bcd hanger part. Jacket Hänger. BCD dry hanger.
Scuba BCD Bladder Flange modeled off of DGX Flanges. In the pictures the red is ABS printed from my design, the black one is a DGX commercial product. I made mine parts interchangeable with the industry standard. the last picture is…
Pretty simple design, I wanted a scan that would hold my scanner upright on my desk so I could see the screen. Some other holders out there are designed to hold with a leather case but this is for no case only. Holds solidly and can press…
Requires 6 M5x16mm DIN7991 bolts and nuts : https://s.click.aliexpress.com/e/_AB4vpN Then you will need M5 DIN7991 screws to fix the adapter to the hub, but the length depends on your system. The button plate used comes from NSH Racing :…
adapts a 110bcd road chainring to the bafang bbs02. The bbshd uses a different bolt circle diameter and center bore(smaller). works with a 36t ring, any smaller and the chain doesn't clear the spider. print flat side down, I used petg and…
Are you confused which AMS is which?! No more! Behold the AMS dog tag that give your AMS a clear letter identifier so you will always know which is the right one to open or assign. The dog tag hangs on the handle of the lid.
I bought the wrong chainring for my fixed-gear bike. So I designed and printed this adapter after finding similar ones on the market for $80+!! I've put about 50 miles on it so far and is no sign of wear as of yet. but PRINT AT YOUR OWN…
Upgrade your Keychain making style with this Curved Bubbly Alphabet Keychain Set (A–Z) — designed for clean prints, strong durability, and a premium modern look with dual layer and dual tone effect. This FREE sample pack includes the…
Base basis for Uniden ubcd3600xlt
Black and Decker battery drill screwdriver bits holder. Clips on the drill hold 5 screwdriver bits Model: BCD700S 0-1400 RPM 0-360 no 10mm 18 Volts 1.5Ah 4x M3 x 3mm Countersunk Allen head bolts. 2x 20mm x 10mm With Two 4mm Countersunk…
Bike chain guard 104BCD 155 mm with Deore XT logo You can print logo and glue it on the ring after printing. I printed the logo details with 1.9mm hight and inserted them when the ring printing by printer pausing
Ochranný kryt pred spadnutím reťaze pre 1-prevodník SunRace 34T 96BCD, vhodný pre prevody 1 x 8, 9, 10. Oba diely sa zoskrutkujú 4 skrutkami M3 x12 mm. Pri nasadení zadného dielu je potrebné stiahnúť kľuku. Tlač PLA Spectrum Deep Black,…
This is a little buoy I created for my Xdeep Stealth, to easily locate my vents wearing thick gloves. They are slightly positive on fresh water. Will hover over your wing, but they're small enough to don't affect your trim. If you feel…
Inner chain guide for 1x conversion of 3x crank-sets uses the 64 BCD mounting. I printed it out of PLA, oriented in a way so the mounting ears needed support. Seems to work fine after a few rides.
Printer brand: Creality Printer: Ender-3 S1 Plus Supports: Yes Resolution: Standard Infill: 30%-50% Filament brand: Generic Filament color: black Filament material: PETG Notes: I printed the part with PETG, which is not as brittle as PLA.…
Scuba Inflator Elbow, works with DGX Bladder Flanges. I printed mine in PLA, and it leaks slowly (over the course of hours). Disclaimer: for educational use only, has not been tested in water, use at own risk, etc. Print Settings Printer:…
Tool for outer portion SCUBA BCD Bladder Flange. Works in concert with https://www.thingiverse.com/thing:2534711 created by Homer310. Print Settings Printer: GEEETECH MeCreator2 Rafts: No Supports: No Resolution: .2 Infill: 50% How I…
Four Stamps with the letters A, B, C and D. They can be used with paint, when playing with kinetic sand and much more! The handle is 60x20mm and the base has an diameter of 50mm. Feel free to scale it up! :)
This cap and plug fit SeaQuest, US Divers, Aqualung and other BCD inflator and port as well as the quick dump valve opening on the back. The thread size is imperial 2 1/8-12. They are useful to protect threads if one removes the inflator…
Recommended printing with ASA filament and processing with Acetone curing for a stronger adhesive layer to protect and extend service life in outdoor conditions. Print Setting: 0.4mm nozzle, 0.2 layer height with 50%+ infill and overhang…
Nautica-Dacor BCD Button Cap to replace a broken cap. The BCD is not made anymore. It took a lot of iterations to find one that would fit. And thanks to Weston Miller (Twitter @notwestonmiller) helped me with the model. Print instructions…
I was trying to fix up an old bike of mine and was trying to figure out the BCD (Bolt Circle Diameter) of my cranks. I came across a helpful resource, Sheldon Brown's 5-Bolt Chain Wheel Guide, and I was able to find the right BCD for my…
This is a replacement chainring guard for the Islabikes Beinn 24 I created for my child's bike. It will fit other sizes of the Beinn (except the Beinn 29). Screws thread directly in to the holes. Based on this product:…
🎁 FREE MULTIFUNCTIONAL ALPHABET SAMPLE PACK (A–D) Try the design before purchasing the complete collection! This free sample pack includes A–D from all four styles so you can test print quality, fit and functionality on your own printer.…
I wanted to build a BCD Clock, similar to the one I got that originally came from ThinkGeek. I used 24 60ppm LEDs , in four six-pixel strips. There is a channel in the Panel Back, along with LED "center markers." All connections are done…
chain ring set for a mtb ebike i got tired of pulling my jeans out of its greasy and dirty teeth and having the chain fall off this has helped a little keeping it from completely falling off . i if were you id make them thinner so maybe…
ill add pictures when i finish printing it. ill also include pics of it on the bike. if anyone can change it up add some cool designs submit them in the remixes. i haven't learned how to do that yet.. thank you also to ad the through…
This is a chain guard designed for the Scott e-bike sub cross 30 that fits a 38 tooth chain ring with a BCD of 120mm. The original one broke and we are unable to order new ones in the states as it is a European design with an outsourced…
A 3D printed case for David Watts' BCD Crap Clock. If you have bought the kit from David, and want a case to protect it - feel free to print this out! It consists of a front bezel and a back part that snap together. The back has different…
BCD dump valve, two versions (fancy and plain). The Plunger piece requires the actual rubber seal to be glued to it. In addition to the rubber seal you will also need the spring, and pull cord (cave line or similar). Version 3 is for the…
Two versions provided. The first was a bit hard to put on. So I provided a slightly scaled version.
If you, like me, have taken the strategy of just having some Stealthburner Hotend Cartridges pre-built and ready to go, instead of trying to perform a hasty nozzle-swap, then you too need somewhere to keep your spare cartridges. This is…
I bought a Varstrom/Bafang ebike conversion kit from the 'zon and needed the right PAS sensor because my bike has external bottom bracket bearings. The kit came with almost no instructions. The instructions for the PAS magnet ring were…
Flush/rinse cap for SeaQuest, Aqualung, etc. BCDs.
This is a work in progress project. Use and modify at your own risk ! If you neither know what Hyperglide is, nor what BCD104 means, you can now safely stop reading :-) First off, this is not my own "invention". A similar product is sold…
This cap and plug fit SeaQuest, US Divers, Aqualung and other BCD inflator and port as well as the quick dump valve opening on the back. The thread size is imperial 2 1/8-12. They are useful to protect threads if one removes the inflator…
Four Stamps with the letters A, B, C and D. They can be used with paint, when playing with kinetic sand and much more! The handle is 60x20mm and the base has an diameter of 50mm. Feel free to scale it up! :)
A quick release buckle for your BCD or Tec/Sidemount Harness. This buckle offers a low-profile design that reduces bulk while maximizing security. It’s precise locking mechanism ensures that once you’re clipped in, you stay in, making it…
Ochranný kryt pred spadnutím reťaze pre 1-prevodník SunRace 34T 96BCD, vhodný pre prevody 1 x 8, 9, 10. Oba diely sa zoskrutkujú 4 skrutkami M3 x12 mm. Pri nasadení zadného dielu je potrebné stiahnúť kľuku. Tlač PLA Spectrum Deep Black,…
Disclaimer - This is a proof of concept digital design only. This digital design is for learning purposes only. This digital design is not for production. Uniden Bearcat UBCD436 HP/PT Desktop stand for leather case. Made this stand to use…
![5-Arm BCD (Bolt-Circle-Diameter) Gauge [Bike Tool]](https://media.printables.com/media/prints/966527/images/7389507_73ea81ff-7fac-44e6-88d8-774cdfcf9caa_27f5a5e9-a0dc-432c-a22b-bb17e21b5f6c/img_7299.jpg)
