Counting matching models…
Pua the Pot-Bellied Pig Added Pua2 on 11.12.2024 (cleaned up noise on but and underbelly, lowered tail, smoothing in some noisy areas) .. Thanks Cody.
Print approx. €4.08–€4.99 excl. taxPreliminary estimate for one variant
Bellis Vase This modern ribbed vase is designed as a stylish decorative element for contemporary interiors. Its smooth curves and vertical ribbing create an elegant play of light and shadow, making it a perfect fit for minimalist,…
Introduction Labelling the plants in our gardens can be both fun and useful, but having to print an entire label for each plant can be annoying and wasteful. This is why I designed this parametric labelling system based on a super easy to…
This is an insert for the Star Wars Rebellion boardgame + Rise of the Empire expansion. There is plenty other inserts in thingiverse for this game, but this is why I prefer mine: All pieces are printable in a 210x250 bed. No gluing…
These are some star wars themed coasters I designed. I printed them with a 0.2 mm layer height with ironing enabled in black PLA and finished with acrylic paint and a matte clear coat. These fit a 4" stick on cork backing that I found…
This is my first published print. And I’m proud of it. This is a card to store and write down the content of the SD (or micro SD) card. I have been looking for this everywhere and could not find any. Am I the only one who wish to label SD…
This 3D printable mask is a tribute to the legacy of rebellion, anonymity, and freedom. Inspired by the iconic V for Vendetta film and the Guy Fawkes persona, it captures the spirit of resistance in a beautifully stylized and highly…
The total length of the sword as is 130cm (1300mm). There's a hole going all the way through the interior of the rebellion designed for a 115.8cm (1158mm) support rod of 1cm (10mm) thickness. If you want to go that route, you'll likely…
The source marked this model as adult content.
This insert is based on foam insert by Brian that can be found here: https://www.pubmeeple.com/foam-core-star-wars-rebellion/ My version is adaptation for 3d print and have only few changes. I print it from PLA on 0,2mm layer hight. Model…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Bellibolt, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
This is an organizer for the board game Star Wars: Rebellion and the expansion Rise of the Empire. It supports sleeved cards, vertical storage, has no lid lift, and the stock cardboard insert can be kept. Print everything once and sort it…
Two models are made. Dante sword 1 piece - single piece with a reinforced keychain attachment. Dante sword 2 pieces - One model is mirrored, keychain attachments are thinner, but once you glue them together will have enough strength not…
Insert for Star Wars Rebellion game from Fantasy Flight Games There is enough space for the expansion leaders and probably the rest of the components will fit except in the case you use sleeved cards (it will be no space for the empire…
Dante's sword from Devil May Cry 5. Not 100% accurate to in-game model, edited to be easier to handle. Created so that the blade and handle can be removed and substituted with other material (e.g. wood).
Played a game of Rebellion with the expansion Rise of The Empire, as the Empire and lost the game because I totally forgot about a target marker from the Rebel player. I realized that the marker is quite inconspicuous on particular…
If your cheerleader likes making pins for other athletes, these embellishments can be added for a cute flair to create a uniform look for your pins and save your wrist from having to write the same thing 150 times. A negative space can…
Dos partes (delantera y trasera) que al finalizar de imprimir habrá que pegar.
Star Wars Rebellion and Rise of the Empire expansion organizer. All fit in original game box, tightly packed so that pieces are secure. Leader box comes in two parts due to size, need to be glued together, same with the two dice boxes.…
Belling cooker knobs These designs are similar in almost all regards to the original Belling parts: 444445412 444445413 1000DF 444445410 444445411 444445412 444445413 I have included two versions - over and hob control knobs The originals…
Farm Animals - Exotic - Pot Bellied Pig 3D printable model.
Perfect compliments to your Death Star's or Secret Base's wet bar.
After playing with the single slotted mission holders (which are excellent), I took a few minutes to mock up a double slotted holder for when we want to send two leaders on a mission. Works great, easy to print.
I created this figurine of a popular football player using Tripo AI, so it's not as perfect as if it were created "by hand". For best results, I recommend printing with organic supports.
Please refer to : https://github.com/ED-MS/ED00
I designed this in Fusion 360 and used the Bambu Slicer to paint it. I printed it on the Bambu Lab X1C with a 0.2mm nozzle at 0.10mm Layer Height, Bambu Textured PEI Plate, and Bambu White PLA and Bambu Black PLA Matte. I haven't tested…
Simple tray to hold the tokens for Star Wars: Rebellion during play. A lid with snug fit is included for storage. EDIT May 25th : Cleaned up and uploaded the OpenSCAD source code. Print Settings Printer: Mini Kossel Rafts: No Supports: No…
The medium mech from the VR game Iron Rebellion. I recommend printing each half on its side.
Another set of walls, barriers, and pillars for Aristeia! the Game by Corvus Belli No support, PLA is fine, print the following numbers: -9x Hex Pillars -6x Double Hex Walls -1x Triple Hex Walls -1x Quad Hex Wallsr -5x Hex Barriers Update…
Bellis – Waterproof Insert This is a dedicated waterproof insert designed specifically for the Bellis vase . It allows the vase to be used with real water without any additional coatings, sealants, or glass containers. The insert is…
It is one of my best-looking models and can be a prop or a toy you should print it in two parts or use supports
Aquí conseguirás las mejores ilustraciones de tus jugadores favoritos , tamaño del modelo 100x125mm que decoraran de manera bonita y sencilla cualquier lugar de tu casa. Ilustración Bellingham realizada con solo dos Colores: Blanco y…
Das ist ein Regal mit Schraubenboxen. Die Schraubenboxen können in das Regal geschoben werden. In Jeder Box ist platz für genug Schrauben und drei Bits. Die Boxen können mit Schildchen versehen werden um die jeweiligen schrauben Schneller…
add space for dice mate and extra cards (the one to print free to play for exemple : https://cdn.svc.asmodee.net/production-libellud/uploads/2022/05/DF_PROMOS_PRINT_FR_22_V2.pdf
Organizer for GMT Games' "Red Dust Rebellion". 1st layer, wooden pieces and cards: all wooden pieces (4x faction pieces boxes, EG forces, pawns) 2 deck boxes (events in one, CR and campaign in another) box with spare pieces 2nd layer,…
Corey of CM Designs puts his own spin on this everyday object for us all to enjoy. He adds inspiration from and connection to the 3D Printing process with embellished extrusions for obvious layers. He connects those layers to a 3D printed…
I found it useful to have at a glance labels for each of the filaments loaded into an AMS. When you have black in PLA+ and PETG, it can be hard to tell them apart. I designed a unique filament tag for each filament and a holder. The tag…
Hey Rebels and members of the Alliance! Show your hope for the galaxy with this Rebel Alliance "Starbird" insignia woggle. The perfect accessory to declare your loyalty while keeping your neckerchief in place. This model is designed for a…
Chasmosaurine Ceratopsid from late Cretaceous Alberta.
Rebellion Insignia keychain, I provided two models for two different keyring attachments. If any other layout for the keychain hole would be better let me know! More than happy to make modifications if needed The original models are much…
Porta chiavi di star wars due modelli uno con il simbolo dell'impero l'altro con il simbolo della ribellione Stampati con PLA nozzle 220° plate 50°
DIY illuminated mirror with the StarWars rebellion logo. BOM ESP8266 or ESP32 USB A to Micro USB B cable Silver/Mirror foil Some foil with a blur effect LED cables (most will do) Solder iron Hot Glue WS2812B See supported LEDs:…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Bring Liberty City's most iconic protagonist to your 3D…
Project: bellingham.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 50x62.53mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 3mm and the Actual…
I designed an easy tap handle to hold the Empire and Rebellion Coasters by IVIUPPET https://www.thingiverse.com/thing:819128 Print with the back on the build plate with minimal supports. Threaded portion is 3/8-16(standard US tap…
Replacement Cap for the Maybelline Löscher concealer
IMPORTANTE IGNORAR EL STL NO VALE DE NADA MATERIALES NECESARIOS AQUI https://s.click.aliexpress.com/e/_Dlz59Jh DESDE AMAZON AQUI https://amzn.to/3uopuiA MI MAQUINA DE CORTE LASER https://s.click.aliexpress.com/e/_DlgS8q7 DESDE AMAZON:…
I designed replacements for the attachment rings from the Star Wars: Rebellion expansion, “Rise of the Empire.”
I wanted to attach some stronger magnets to my warcrow models so I made this adapter to attach the 8x2.75mm (often ordered as 8x3mm) magnets
Designed to fit a 19mm steel curtain rod (https://www.bunnings.com.au/sandleford-19-x-2400mm-chrome-tube-rod_p4821925), I designed this as a bit of a labelling system to be easily usable and expandable. It starts with the holder and end…
A simple labelling system for wireframe laundry baskets.
You know when you want to fix your hair but with drama, power, and a hint of medieval menace ? Meet Darkfang , the gothic sword comb nobody asked for… but everyone will respect (or mildly fear). It doesn’t cut. It doesn’t stab. But it…
This is an extra divider for the board game Coup Rebellion G54, as the set comes with few spacers. Category: Games
This is a modified version of @chouchou_348970 Iphone 13 Pro case with the Star Wars rebelion logo.
this is a box for the board game coup: rebellion. It is also my first self designed print so i would love some feedback.
Filament Labelling System A clip to prevent unravelling of partially used filament rolls that can also be used to record the amount left on the roll (metres or grams) . See IMPROVED VERSION at:…
Filament Labelling System 2 A clip to prevent unravelling of partially used filament rolls that can also be used to record the amount left on the roll (weight in grams) . Original version at:…
Replacement part for a Bellini milk frother Lay print on the side for faster printing Supports on High resolution print
Use layer height 0.2 mm. The paint of a permanent marker can be easily removed by Isopropanol
A compact insert that drops into your Horizon Forbidden West: Seeds of Rebellion box, replacing the two small cardboard trays. The main tray’s lid doubles as the game’s threat track, with recessed slots sized for standard 8mm cubes. Keeps…
Bases with 40mm frontage for 15mm (1:100) scale Ancients, suitable for De Bellis Antiquitatis (DBA) Bases feature a shallow lip, which may help with minor unevenness in playing surfaces. Optionally there are variants that allow for…
I have been working on a Monstera leaf decorated planter. The print can be done with no supports and should come out perfect. The current version is just a pot with no drip holes and no plate , but I am planning to add files with these in…
Printed using Generic PLA on the Prusa Core One - no supports required. Balanced 0.2mm used and the ObXidian HF Nozzle. If supports are used it would be better to to use a different material with a multi color system.
for English see below Meine MMU3 for MK4 ist gestern gekommen. Noch habe ich keine Erfahrung damit. Allerdings habe ich mehrfarbige Beschriftungen bisher durch eine Intarsienarbeit realisiert. Da ich mir vorstellen kann, dass euch das…
Replacement of failed weak part connecting vertical vibration excenter with platform of DUVLAN Bellis 4D or other clones.
Pretty basic cake topper or reuse for decorations of another kind.
Black outer frame Printed as a standalone part, providing a clean frame with a strong sense of depth. Back plate with jersey design The central plate featuring the jersey, name, and number. Printed flat for sharp details and a clean…
Support the rebellion with this minature lightbox! A wide base and keyhole allow it to be hung or stand up on its own.
iphone 16 pro case with bellingham picture
The only thing i could find that was bad about it is the apple logo doesn't show to the stem.(Tested works with PETG) And this is a remix of the model at this link https://www.printables.com/model/328286-iphone-13-case thanks to the…
Upcycled Storage: True Fruits Bottle Cap (Star Wars Rebellion Edition) Turn your empty glass smoothie bottles into useful storage containers! This cap is designed specifically for "True Fruits" bottles and features the Star Wars Rebellion…
Isabelline (architectural style) is an architectural 3d model STL of a real building or structure in the isabelline architectural style, made for collectors searching for isabelline architecture model, spanish gothic architecture, and…
Maybelline concealer cap 3D with edge inside to make it click and rounded top like original design. I printed it in Translucent PETG because the original cap is also Translucent. PLA would also work.
A bellibolt shaped smart watch charger stand Printed with generic PLA at .16mm with 15% infill with auto supports, though I would advise using maybe 20% infill as mine came out a little light I had to separate the feet from the rest of…
Snow Bike accessory compatible w/ Battle of Hoth or Rebellion. Penny shown for size.
Starship and Vehicle compatible with Rebellion and Battle of Hoth. Add a new faction to the battle with a circle shaped starship and a tank. Image includes penny for size, self painted one of the starships and the tank. Printed using Qidi…
just some dragonfly wings for a Libellis bottle
3D printable Rebel Alliance logo (Star Wars). This design can be scaled to any size in your slicer. Printed flat with low infill (approx. 5%) to save material and time. Use it as a wall sign, desk decoration, or a personalized gift.…
Frank Michael (Franco Gabelli) – Buste Français Ce buste représente Frank Michael , de son vrai nom Franco Gabelli , chanteur emblématique de la scène francophone et figure incontournable de la chanson populaire. Inspiré de la…
Detailed 3D printable Chess Piece Pawn Rebellion figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…
Extinction Rebellion logo. Combo files has extinction rebellion on one face & Palestine flag on otherside.
Bellini dining chair white Feet item code 48870 These are about a 14/5 year old dinning Chairs white leather metal square legs that have thin plastic push in feet that end up being pushed into the chairs leg and scratching your floor over…
Extinction Rebellion logo. Combo files has extinction rebellion on one face & Palestine flag on otherside.
✨ Free DXF vector file — minimalist circular silhouette with an edgy, rebellious gesture. Clean lines optimized for crisp laser cutting without fragile bridges. 📐 File specs: • Format: DXF (vector lines, 0.1 mm width) • Units: millimeters…
Hoy venimos con un diseño moderno de posavasos con temática floral opimizado para no gastar mucho material estampado con relieves de torbellino, leopardo animal print y tri-angle. Los posavasos encajan unos con otros perfectamente. Si…
You know when you want to fix your hair but with drama, power, and a hint of medieval menace ? Meet Darkfang , the gothic sword comb nobody asked for… but everyone will respect (or mildly fear). It doesn’t cut. It doesn’t stab. But it…
A bellibolt shaped smart watch charger stand Printed with generic PLA at .16mm with 15% infill with auto supports, though I would advise using maybe 20% infill as mine came out a little light I had to separate the feet from the rest of…
The total length of the sword as is 130cm (1300mm). There's a hole going all the way through the interior of the rebellion designed for a 115.8cm (1158mm) support rod of 1cm (10mm) thickness. If you want to go that route, you'll likely…
Bases with 40mm frontage for 15mm (1:100) scale Ancients, suitable for De Bellis Antiquitatis (DBA) Bases feature a shallow lip, which may help with minor unevenness in playing surfaces. Optionally there are variants that allow for…
☕ Star Wars Rebel Coffee Cup Lid – Join the Rebellion with Every Sip Fly your colors with pride and start your day like a true member of the Rebellion. This Rebel Alliance–themed coffee cup lid features the iconic starbird insignia,…
This is a digital 3D printable model of Dante’s iconic Rebellion sword from the Devil May Cry anime. (Netflix series.) The download contains : - STL cut to fit 200 mm print bed - Whole assembled OBJ file All cut parts are placed on the…
The best Rebellion 3D model you’ll find on the internet! For the most epic Dante cosplay ever! - Accurate to the source material - Fully tested - Print ready and oriented optimally All 3D models in this shop are made by a propmaker. I…
