Counting matching models…
Logos for Knipex, Stabila, Freud and Klein Tools. Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you need help with inserting color changes into the slicer, let me know and I'll show you how to have PrusaSlicer…
I printed and really liked the Skadis hook from @KimJanosch for my Stabila Type 70 Spirit Level. Unfortunately the profile of Stabila Type 80 is to deep. So I decided to make a remix to hold my Type 80 Spirit Level. Fits the Skadis Board…
Can also be used in a vehicle. Never fallen out. A fusion 360 drawing is included for any adjustments. Printed in PETG (REAL brand) Support: no
Level Holder for Systainer This holder is designed for a Stabila Level (60 x 30 mm) and works perfectly with Systainers. Details: Printed in PETG with 5 perimeters for added durability. The clip-in version can be printed without supports.…
Sonoff doesn't inlcude an adapter for this valve, so I made one. It's just an M28x1,5 to M30x1,5 adapter that is the correct length for the Oras Stabila valve (not the pro model). I printed this with a MK3S, 0,6mm nozzle, 0,15mm detail…
Print two pieces - Mount to ceiling. You mount the spirit level by putting one edge ind the holder and then twisting the spirit level the rest of the way.
When I came across the original design I thought it would be handy if you could mount a few of the Honeycomb shelves in the struts so I downloaded the file. I was a little disappointed to find that the hexagonal design used did not match…
What does the title of this mean? Bilateral symmetry is where a pattern repeats left to right, but not radially. So, this top looks very different staring down the X axis than staring down the Y axis. Even so, it is very stable and spins…
The price on ready-made corner ambient lighting is out of control, with the cheapest I've been able to find being ~$66 USD. So, I wanted to design and build one of my own with an LED Strip and 3D Printing! Enter The AmbiLamp How to print…
Petri dish stand for a variable scientific kit.
Wall mount for the Stabila Pocket Pro spirit level. Releases 2024.05.22 v1.0 Initial Release Print Description Printed using the Protopasta Matte Fiber HTPLA with good result:…
piccolo portachiavi a forma di bilanciere ad incastro con tre dischi
I have attached a Fusion model that is precisely designed according to the measurements. However, when printed on the MK4S, the result was slightly different, mainly due to bridge printing. After enlarging the openings by 1mm, the printed…
Test tube rack for a variable scientific kit
Cube LED cover for a variable scientific kit
Cube plugs for a variable scientific kit.
Allows the build plate to be dripped from either side as needed
Bilancia bimby TM7 disponibile in due dimensioni differenti, una da 150mm e una da 180mm, comoda per pesare senza l'utilizzo del boccale. Realizzata in PLA.
Enhance your AlbiLAB scientific station with a custom-designed 3D-printed lid featuring an integrated holder for a float switch and water pump. This bespoke accessory facilitates precise liquid level control, optimizing your experimental…
There are five holes on the board, the big hole is for ventilation and the four holes are for screws.
Opaque 3D-printed cover for the AlbiLab box, designed for easy printing and compatibility with the original device.
I wanted to improve my first row of hexagonal tilings close to the floor. The video shows how it operates. https://youtu.be/4ICogu7UoH8 I glued in a neodynium magnet from the bottom to hold the stabila pocket magnetic level in place.…
Control your AlbiLab remotely with ESP8266 and code from GitHub . Wi-Fi connectivity enables remote control with full compatibility with AlbiLab and secure access just for you. You can control sensors, collect and monitor data, or…
bilancere deviazione direzione spruzzatore per irrigazione
This model is specifically designed as a shade cover for the Albi Lab. To print it successfully, you'll need the MMU3 , a hardened nozzle , and magnetic filament like Prusament PETG Magnetite 40% Grey. The MMU3 is essential because it…
For this model, I used the following filaments: PLA Conductive filament Proto-Pasta Prusament PETG Magnetite 40% Grey and PLA. I used an Arduino ESP32, code here
Das ist ein Wohnmobilaufbau für einen Lego Technik Ford Raptor Ladefläche es passt perfekt und schaut gut aus.
Replacement end cap for a Stabila Type 187 level. I printed the caps with ASA and the bumpers with TPU. TPU doesn't have quite the same "grab" as the original rubber bumpers when you put it against a wall, but having a cap is better than…
Supporto per parete attrezzata Honeycomb Storage Wall per una Bilancina di precisione con sagoma 85 x 24mm Non necessita di supporti di stampa.
Stabila 80 AS 8" Level Model #29008 Gridfinity bin 2x5
I'm using my Stabila Pocket to level the x, y and z axis after maintenance or modifications. To prevent it from damage and to keep it in tiptop shape i've made this casing. The foto's posted here are from the first print, and i needed to…
Coins for learning binary numbers. Biland is a part of prof. Hejny math method https://www.memoryofnations.eu/en/hejny-m
I designed a spacer for the ugreen cm400 ssd case, because the rubber ssd holder isn' capable to hold the ssd in place, in case of a drop. You can use one spacer, but i recommend too. I use PETG for printing the spacers because the ssd…
Das ist ein Wohnmobilaufbau für einen Lego Technik Ford Raptor Ladefläche es passt perfekt und schaut gut aus.
Bilancia bimby TM7 disponibile in due dimensioni differenti, una da 150mm e una da 180mm, comoda per pesare senza l'utilizzo del boccale. Realizzata in PLA.
print 2 of these, put m3 nuts and screws in, and tighten it up. it should be able to get pretty tight.
just to hang your levels and have a nice and clean workshop ;)
There are two holes on the project that are used to attach the circuit board with screws.
Let's dive the pump all the way down! And the level probe with it!
When you need it to be dark inside the box, but sometimes want to take a look inside, now you just slide the lever. The entire mechanism is fully 3D printable, without supports and designed so that everything happens on the inside. This…
A stand for the ubiolabs wireless charging pad sold in costco and elsewhere. I used support for the middle section but not sure if it's really necessary. Category: Mobile Phone
print 2 of these, put m3 nuts and screws in, and tighten it up. it should be able to get pretty tight.
