Counting matching models…
For perfect first break. Due to the angle, the balls can be perfectly placed against each other. Print the Part 3 times and glue it together. designed for a ball diameter of 57.2mm. If you need a different ball diameter you can scale the…
puente para acoplar a un palo de billar, y facilitar los tiros por encima de las demas bolas.
Hier eine kleine Dose für die runde Billardkreide von Taom. Ich habe das Gewinde nochmal nachjustiert aber nicht mehr neu gedruckt. Bei meinem Druck musste ich mit dem Cutter nacharbeiten. Zum Zeitpunkt des Drucks hatte ich noch keine MMU…
Muy simple, Colocas las torres en las bases, y luego el frente, que sostiene las bombillas
It lifts your glasses to optimize the angle your are looking through it during aiming and performing your stroke.
Print this diamond shape to line up the balls for a perfect break in a 9-ball game. Designed for standard balls with a diameter of about 57.2mm (2 1/4"). But the source code is included, so you can adjust it to your needs. Recommended…
Eine Aufbauhilfe für das 9 Ball - Spiel. Durch die Schräge lassen sich die Kugeln perfekt aneinanderlegen. Gedruckt mit 2 Perimetern, 0.3 Layerhöhe, 10% Infill, 0.4er Düse A setup aid for the 9 ball - game. Due to the angle, the balls can…
Pool Billard Clock The clock has a diameter of 17.5 cm, a depth of about 2.5 cm and can be hung on the wall. The case of the clock is printed in green to represent the cover of a pool table. The pool balls 1 to 12 represent the numbers of…
Extension and rubber bumper for pool cues.
I got this Mini Pool Table for Christmas and it really is fun. Only thing, unless you have tiny hands, it's really hard to get the balls back from the pockets. So we used a spoon as a tool, but that's not my way of solving this. So now we…
Printed with variable layer height. Standard Parameters.
para hacer el cinturón utilice una cinta rígida deberás coserla en el seguro añadí otro diseño para la hebilla lo puedes encontrar en los archivos como broche reforzado
This form of the bombilla is almost ideal for me. Used for both Argentinian and Brazilian types of yerba. Printed horizontally, with standard quality settings. Do not use PLA because it becomes soft at 60 C. Note: some types of material…
Glue or weld the lower part with a hot air gun Printed with TPU Shore95A
A cue holder with three storage surfaces and storage option for cue protective caps is a practical solution for billiards enthusiasts. The high-quality and aesthetically pleasing design ensures durability and stability. The holder…
! To print the model, set the nozzle temperature very low. Even 215 degrees Celsius for Petg due to the small model and the need to cool down. ! Supports, preferably standard ones, should also be added. It is best to use a 0.4 nozzle
Support pour triangle et craie (Bleu) de billard à fixer avec une vis de 4,5 maximum de diamètre. Se fixe au mur ou à l'endroit qui vous convient le mieux, sur un flanc du billard ou sur un des pieds. L'imprimer comme sur la photo.…
EN: Modular Top Plate System : The removable top plate can be easily swapped out to customize the design. An integrated release pin allows for quick and tool-free changes. Double Bottom for Weight Adjustment : The double bottom enables…
La mesa de billar está en una residencia escolar donde los materiales sufren mucho por el trato al que están sometidos. Las troneras estaban rotas por lo que diseñé tanto las esquineras como las centrales para tener siempre repuestos
1 Mesurez les dimensions de votre clef. 2 reportez les dans les cases vertes du tableur du fichier freecad en vous aidant du dessin. 3 Exportez la forme en .obj. 4 Importez dans Prusaslicer. 5 Découpez et insérez une pause au niveau de la…
A small tray for billard chalk blocks.
///Sujetador de bombilla para facilitar toma bimanual de taza Realizado por el Área de Tecnologías Inclusivas del Centro Comunitario de Rehabilitación (CCR) Collipulli - Departamento de Salud Municipal Región de la Araucanía, Chile…
Anime style miniature based on Sybilla from Infinity the Game by Corvus Belli.
Mate holder i made for my cup. Could suit other ones, I haven't tried. Before priting check the size of your mate.
This is a simple Snooker Cue Holder that is hooked on a Thermor Bilbao 3 heater. This is a mini-snooker on a multi-games table.
imprimer avec support taux remplissage 20% résolution 0.28 Pla Cuivre
Secador para mate de calabaza con soporte para bombilla Diseñado para facilitar el secado del mate después de su uso, manteniéndolo invertido y favoreciendo la circulación de aire en su interior. El diseño incorpora un cono central que…
Cree pour ranger 6 queues de billard
english A set-up aid for the 10-ball game. (I haven't printed this part myself yet because it doesn't fit into the space of my printer without being divided. I would therefore be very happy about any make). deutsch Eine Aufbauhilfe für…
Dimensions of the part are shown in the photos. Easy to Print Universal Belt Loop / Belt Keeper The model is optimized for easy printing without supports and strong enough for everyday use thanks to its solid geometry and smooth…
Billa is a table lamp composed of a lampshade and a base, held together by two threaded rings and designed for an E14 threaded sleeve lamp holder. The threaded rings are included with the model and are printed as part of the project. To…
Prototipo de trabilla para reloj Garmin. Hecha con PLA por lo que no conozco que resultado puede dar al no ser flexible. Category: Parts
Una hebilla encajable con diseño de plug, perfecta para múltiples usos. Esta hebilla tiene un espacio diseñado para pasar una cinta o caucho, lo que la hace ideal para diversas aplicaciones. Para un ajuste perfecto, simplemente calienta…
Switch designed for people with limited movement to operate communication equipment, toys and other electronic equipment. [Spanish] Pulsador diseñado para movimientos de barbilla y para movimientos con poco control de cualquier parte del…
Molde de galleta con forma de bombilla
Cache pour pied de pergola 90*90 avec pied ajustables SIMPSON APRN 100/150 Cet habillage est en 2 pièces symétriques qui viennent prendre en sandwich le pied et viennent se fixer à l'aide de 2 vis M6*30mm J'ai inclus un système de…
do klapek potrzebny klej
Hebilla para poder llevar una botella de agua. el paso del cuello de la botella es para 30 mm de diámetro.
Zum Trocknen ists am besten wenn die Bombilla hängt. Drum hab ich eine Kabelhalterung an meine Bombillagrößen angepasst. Meine Bombilla haben einen Durchmesser von: 8mm 6mm 5mm Die einzelnen Halter haben einen Durchmesser von: 10mm 8mm…
Ideal para todo tipo de automoviles.
De rubber van mijn E-Power AquaBlade was stuk, dus zelf 1tje getekend en geprint met Prusament TPU 95A. De oude rubber was geplakt dat was dus wel wt werk om die te verwijderen. De nieuwe heb ik langs voor en langs achter geplakt met…
Hebilla para poder llevar una botella de agua. el paso del cuello de la botella es para 30 mm de diámetro.
This is the multi-part version of the lightsaber. It has been broken into different parts so they can be printed separately in different colors then glued together. There are locators for making the parts easy to glue on. The cap is…
10 rub coin replacement Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.28 Infill: 25 Category: Hand Tools
Just another lightbix / night light to be used with your prefered LED stripe and power supply. The model has a hole in the back to put cables through. Enjoy & have fun Material: PLA
3D printable topographic miniature of Boulogne-Billancourt - 🇫🇷 France Capture the beauty of Boulogne-Billancourt 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates…
Who did not dream of playing billar with chopstick anytime? ; ) With this chopstick stand, no wait will be long, while enjoying a good match. I added three STL: 1º Full: full piece, if some one prefer to slice by his way 2º Body: separate…
ESCOBILLA WC TOILET BRUSH PEGADA A LA PARED GLUED TO THE WALL Category: Household Supplies
Escobilla baño bathroom toilet brush. -OJO- Las paredes no son iguales. Pegarlas según imagen. No tiene agujeros para sujetar. Usar pegamento fuerte en todas las superficies traseras para sujetar a la pared. Usar PLA, PET o PETG al 100%.…
