Counting matching models…
This model is a snow blower engine kill switch key. Most snow blowers have a plastic key that prevents the engine from running if the key is missing. The manufacturer key does not have a hole to put the key on a key ring. This key fits…
https://www.paypal.com/donate/?business=C8C56MQUF7KQ4&no_recurring=0&item_name=Thank+you+for+donating%21+It+helps+me+create+new+projects+and+get+supplies+%26+upgrades.%0A¤cy_code=USD This is an adapter I created for Peterbilt 520 style…
This Peterbilt 359-inspired truck is made in such a way that allows it to be printed all in one piece. Once it's done, you can pop it off your buildplate and play with it. The wheels spin, the hood opens and the sleeper cab door on one…
This is a remix from @doc 's design: https://www.thingiverse.com/thing:2815022 I trimmed the back plate little slimmer, and made screw holes to fit Biltema perboard. I printed this with 4 walls and 4 bottom and top layers.Infill 10% is…
A lot of parts, but a fun project. most fittings are to big, but can be glued in place. The exhaust were custom made as i did not like the originals. It came out ok... its not my best print due to (probably) moist filament. find original…
Biltema pegboard tool holders These are tool holders for a Biltema (Swedish store) pegboard. The holes are cc 12mm and has a diameter of 3.5mm. The FreeCAD files are included so you can modify them to fit different pegboards. Desk mount A…
Rex - 352 Peterbilt Day Cab Front Read Carefully! - Rex is a modular truck system. This post is for the front section - More option to come - All the STL files you need to build the rollback truck is here free on printable.com. The…
Print, attach to pegboard, put drill bits into it, ready. Biltema pegboard holes are 4mm wide and 12mm abart from each other and it is sold in Scandinavia, but there are other brands around the world with same diameters.
Simple design for a friend to print on their Ender 3.
Simple holder for safety glasses, modified from James Purcell's thing to fit Biltema pegboard. Biltema pegboard holes are 4mm wide and 12mm abart from each other and it is sold in Scandinavia, but there are other brands around the world…
Someone asked me to make a toilet gnome with a mobile phone. So here it is :-) I added the nice mobile phone model https://www.printables.com/model/45865-iphone-12-mini-dummy-flat-screen-version . Thanks Please check your roll size before…
This is a remix from @didymus : https://www.thingiverse.com/thing:2269374 I retrofitted his design to fit Biltema pegboard This takes 28 meters of filament (84g) and with layer height of 0.25mm and speed of 60mm/s is ready in little over…
Jag har designat två adaptrar som gör att man kan använda Parkside batteri till Meec och Biltema maskiner, som enbart har positiv och negativ kontatker, alltså ingen signalsladd. Adaptrarna sitter bara fast genom friktion alltså ingen…
With this adapter you can attach toolholders from the MODULA system. This is a universal adapter for (metric) PEG boards, this one fits Biltema, Jula, Clas Ohlson, and many others world-wide, CC 12mm (15/32 inch) spacing of the 4mm (5/32…
I got tired of holding resin vat on top of sifter by hand very fast so needed to get some kind of holder for it. @alphaa had great design for that job, but I want to keep my table free from excessive clutter, so I remixed his design to…
RickBigriver's caliper holder was just what I was looking for, but I rather attach it with screws, so I modified it a bit. I also needed one for other caliper beside my other printer, that one is with smooth bottom and attached with…
I wanted the same bumpers as my Jeep Wrangler, so I re-diesigned the originals from 3DSets. I also customized the winch, winch hawse, a stronger winch drum and the D-Rings. Printed with Overture Matte PLA with 80% infill and 0,10 layer.…
This is a remix from Frank Lumien's great design (on the right in first picture, remix is on the left). I had bigger screwdrivers than his biggest holder managed to fit in, so I edited his design to make it a little bigger one. My own…
You will need at least 3 filament colors Tree supports recommended No screws are needed; only a little of you choice of glue Most parts friction fit together
Holder for small clamps suitable for Biltema pegboards which have 4mm holes with a c/c distance of 12mm from each other.
Use these hooks to hang up your meat for making Biltong (Beef Jerky)
Yeah, it's a holder for Ryobi multitool. Four screw holes are in place for Biltema pegboard, but you can also attach this with wood screws to other surfaces. Biltema begboard has 4mm holes 12mm abart. Print instructions It's important to…
Here's an awesome semi truck for your hot wheels farm/highway/truckstop scene! Or in reality it can be whatever you want it to be. There is a possibilty of variations in the future, and there is a few expiramental files that I haven't…
A remix of two multimeter holders. Works on IKEA skadis pegboard using the “Ikea Skadis clip” design by ByteSlinger.
I modified barty3d's Ryobi tool holder to fit Biltema pegboard. This one is a bit tight for some tools but perfect for some. Oleost has better toolholder for some tools and it uses less plactic, but for example Ryobi P755 fits much better…
Printed at 0.3mm as fast as a Prusa can go. Quality does not matter.
I use this socket wrench two times a year while changing winter/summer tires to our cars and always was searching where did I put it this time, so it was time to print it's own holder to my pegboard. This is intended to be used on Biltema…
This is a meat dryer. The biltong process needs a bug free environment with a constant airflow that dries the cured meat during the process. Print instructions BOM 1pc DC fan (standard 90mm from a PC PSU) 1pc DC power supply for the fan…
Simple pegboard holder for infrared thermometer. Biltema pegboard holes are 4mm wide and 12mm abart from each other and it is sold in Scandinavia, but there are other brands around the world with same diameters.
HERE IS A PETERBUILT KEYCHAIN I DESIGNED FOR A CUSTOMER MAYBE OTHERS GET SOME JOY OUT OF THIS 1 YOU NEED A MULTICOLOR PRINTER FOR THE PROPER LOOK AND I USED A SPECIAL PEI BUILD PLATE
@Kolo23 's fine model converted to fit Biltema pegboard. Biltema Pegboard has 4mm holes, 12mm apart from each other and it is sold in Scandinavia, but there are other brands around the world with same dimensions. You can also attach this…
Bahco mount for 4 x L Bahco mount for 4 x L old big model Bahco mount for 4 x 4 L Bahco mount for 5 x 3 PH-2 PZ Bahco mount for 5 x EL Bahco mount for 5 x TX
Use organic supports for the pegs.
In meinen Handyständer passen alle gängigen Handys rein, egal mit oder ohne Hülle. Es wird kein Support benötigt.
Logos for Maglite, Kärcher, Troy-Bilt and Ridgid Flames decal. The Maglite logo looks nice with glow-in-the-dark filament for the white lettering! Let me know if you're looking for a particular logo and I'll try and get it for you.
Remixed the screwdriver holder for my pegboard (4mm holes with 12mm spacing). Made to be printed upside down without supports. May need some skirt to support the small hooks that are built from the table. The hooks are quite thin, but the…
This 3D-printed bracket mounts to a Biltema Multi-X 18V battery, enabling its use in various projects. It uses standard red insulated male spade connectors (6.35mm tab) for the terminals. Note: slight filing may be needed for a perfect…
All my solder rolls are 30mm wide and have 20mm hole, so this holder has room for 32mm wide roll and stub diameter is 19mm. This uses 6 grams (1.9m) of filament and is ready in 51 minutes when printed with skirt and speed of 60mm/s. You…
I made this adapter to fit a Biltema 2 ton jack. I have printed it in PETG with 4 perimeters and 40% infill (honeycomb) for strength. Use supports. I should work on most newer BMW models.
This fits disposable gloves box which is sized 113*43mm. I tried several brands and they all fit perfectly. Biltema begboard has 4mm holes 12mm abart. Biltema operates in Skandinavia, but there are other brands with same dimensions and…
This is minimalistic pegboard holder for staple gun with dimensions of 25mm wide and 80mm tall. There is 5 degree angle on the holder and little upper lip to keep the stapler in place with ease. This is intended to be used on Biltema…
Simple and minimalistic holder for 1/2 inch sockets. Biltema pegboard holes are 4mm wide and 12mm abart from each other and it is sold in Scandinavia, but there are other brands around the world with same diameters. Category: Tool Holders…
Please look at the several STL files , I plan to upload more in the future. Note that the feet can be mounted from the both sides (if needed at all) also note that all the OEM Biltema accessories will fitt. Enjoy !
This pegboard from Biltema has 4mm holes for 4M screws spaced at 12 mm apart. There are currently four holders: Calipers (Skjutmått) from Clas Ohlson, Calbe stripper (Manuell Kabelskalare) from Kjell & Company Keiba ET-507 pliers from…
This is a remix from this: https://www.thingiverse.com/thing:4829889 I only changed holes to fit Biltema Pegboard. Only takes little over hour to print and uses 12 grams (4m) of filament. On the holder you can see two great printable…
Here you have 12 hooks in the STL file Printing: PETG 0.4 nozzle and 0.2 layers and 25% cubic infill and minimum 3 walls
In meinen Handyständer passen alle gängigen Handys rein, egal mit oder ohne Hülle. Es wird kein Support benötigt. Die Halterung hat öffnungen vorgesehen, damit das Handy - am besten mit einem 90° Stecker - direkt auf der Haltertung…
You need a small burner to lots of things. Shrink wraps, removing paint, melting plastic, defreezing locks, wood burning, starting campfire, etc. This pegboard holder is made for Biltema branded small burner, which tank diameter is…
A bit of hot glue on the lower part to make it stick to the pegboard. The hooks are strong enough for a stack of grinding wheels.
This is a simple mounting mesh I made for the 110x180x70 Biltema Kopplingsdosa/ Junction Box. Edit: Added more!
I just made small adjustment to fit A_Str8 design to Biltema pegboard. Original design is here: https://www.thingiverse.com/thing:4132596 Biltema begboard has 4mm holes 12mm abart. Holders are attached with screws, so they can take much…
This is a custom rear mounting bracket for Everbilt drawer rails. This bracket mounts to the rear wall of the cabinet and supports the drawer slides. This works with the D688 series Everbilt Bottom Mount Slide Set which comes in lengths…
Really quick remix for Biltema pegboard, as I needed one for HSW and one for Biltema pegboard. EDIT: Added remix for smaller 4mm hexbits.
Needed a tape holder for my clas ohlson pegboard so I adapted this great design: https://www.thingiverse.com/thing:3152263 Uses 8mm dowels but I uplodaded .step and .f3d files for easy editing too! https://ko-fi.com/aasikki
Print the parts in their colors, white for the body and service body, glue required for assembly. I used paint markers to paint it.
Edit 9.8.2024: One of the screw tabs of my holder snapped, so I uploaded a more reinforced one that should definitely last without issues, also added a cutout for tightening the bottom screw after deciding it wouldn't look that bad after…
3 different ways to put carpet knife to your Biltema pegboard. In Biltema pegboard holes are 4mm and 12mm abart. Biltema operates in Skandinavia, but there are other brands with same dimensions and you can also screw directly to wall.
I wanted to put my hex precision screwdrivers on the Multiboard but no holder would do the job so I designed my own. It fastens with two 9 mm small thread flat head bolts. The middle hole is not used but it's there if you want a single…
Universal hook for Biltema / Angel-Cache fishing rods. Unlike standard screw-in or glued hooks, it requires no modification of the rod. It is intended for a 7–8 m carbon-fibre telescopic fishing rod with the last segment removed. The hook…
I designed this holder to fit tools like edge bevelers and stitching groovers by Oka Craft and KemovanCraft. It's compatible with euro-style sheet metal pegboards that have 4mm holes spaced 12mm apart. The tool holder is mounted with…
I made these for American Truck Simulator, designed to fit logitech pedal setups. Two long pedals are included for the accelerator and brake and a shorter pedal for the clutch, though all pedals should be interchangeable. NOTE: these are…
In unserem C5 AirCross gab es nur eine Ablage für das Mobiltelefon. Jetzt habe ich dafür eine Halterung konstruiert, die man per USB Kabel mit dem Auto verbinden kann. Somit sind die Ladung und die CarPlay Funktion möglich. Das Telefon…
Print your own extra assortment boxes for Biltema Art. 71-815 These boxes can be stacked outside the assortment box If anyone wants a 3x1 box I can make a file and they can test it. I only need the 1x1, but modelled and tested the 2x1 and…
In meinen Handyständer passen alle gängigen Handys rein, egal mit oder ohne Hülle. Es wird kein Support benötigt.In meinen Handyständer passen alle gängigen Handys rein, egal mit oder ohne Hülle. Es wird kein Support benötigt, da er auf…
This is designed to be printed with 0.42mm line width! If you are using 0.4mm nozzle, then 0.42 is coming out great and making strong prints! Also included is 3mf -file, so you can open this in Microsoft 3D Builder and easily change wall…
Wanted a holder for my Biltema superglue. Printed with PLA
These accessories are made for the 4mm holes and 12mm center to center pegboards made by Biltema in Skandinavia. 90 degree angle iron holder with 3 holes for fastening (No support needed) A universal converter for making it possible to…
I first made holder for wire stripper, but then noticed that my ferrule pliers needs similar holder. So here comes double holder for electric pliers! drum rolls Included is also a file for single holder, if you thing you can go on with a…
Replacement bushing for the 12" rear wheels on my Troy-Bilt push lawnmower. It has a 1/2" ID and a 1 1/8" OD, with a flange on the end. I made the bushing slightly longer than the original since there was room to spare and I don't want it…
Drill bit holder - 1mm -> 15mm. 0.5mm steps below 7mm. No screws needed.
I did not want to buy a wooden rod just to rake leaves when I already have an adjustable broom. Biltema does not produce rakes for the screw mount, so here's an adapter.
Thanks to the original creator for providing a Fusion and STEP file so I easily could redesign this. Remixed to fit 44 mm hose for the Biltema vacuum . Just remove the normal end piece of the hose and this fits right in.
This jig is designed to give a perfect fit for the Everbilt 3-1/2in w 1/4in Radius Hinge. The jig works with the Porter Cable Router Template Guide 42054 (¼in I.D. and 5/16in O.D.) and Whiteside RU1800 Standard Spiral Upcut Bit 3/16in…
Not a lot of changes; I closed off some of the cable routing nooks so that cables would want to stay in while you put the side on. Put a slot so you can actually attach the bottom left frame screw, Made the prusa text deeper. Indented the…
Better Bilt windows have been out of business since 2010 and as far as I'm aware of the parts are no longer accessible. My house did not have window screens so I have been using DIY window screen kits and designed these replacement clips…
I first made simple alteration to Droidski's design to fit this to Biltema Pegboard, but after a month of use, the lower thing holding the can in place, broke down. So I made the lower thingie stronger in this v2. For some reason I made…
We kept being annoyed by clothes hangers sliding off the end of the rods in our closet, so I whipped up these quick press-fit end caps to keep them on. We have an Everbilt wire closet setup from Home Depot which uses ¾" hollow rods, this…
I'm always searching for my hex keys (or Allen wrench or Allen key) so mayby this will help. Did you know in Finland we call hex keys "kuusiokolo", which translates to "six sides hole". Germans use the word "inbus", Italians call them…
I tend to need couple of smart device chargers in my workshop, both micro-B and USB C types, but the use is so random that I needed a holder for them and not taking the space at the power outlet. NOTE - this is for the europlug only!…
Needed a pegboard holder for my tape measure so I designed one. I uplodaded .step and .f3d files for easy editing too! https://ko-fi.com/aasikki
LGB Vanderbilt tender rear steps easily break, the cover easily get lost. The original parts are no more available :-( Therefore here are the replacement parts :-) The parts have been designed to be as close as possible to the original…
The stock plugs are very poorly fitted, this one is designed to stay put on the highway. Printed in TPU.
remix of Ivan3D's holder modified to fit Biltema pegboard with a screw.
I needed pegboard holder for Ryobi One+ batteries and there were many great ones already made by different people, but I found @cregory83's most suitable for my needs. I simple changed hole sizes and locations to fit Biltema pegboard.…
Some toolholders for RYOBI made to fit Biltema or Jula pegboards with 4mm holes cc 12mm. Some of these are made from scratch and some are remixed models to fit Biltema or Jula pegboards. All parts in the pictures are printed with Addnorth…
print standing up
Need 2x 50mm M4 and 2x 30mm M4 with 8x M4 brass nut. It is possible to either fasten the bracket to the AMS with small and long wooden screws or have it loose and just place it on the bracket. Original idea is to fasten the bracket and…
I liked @eirikso's wall mount but needed to fit it to my pegboard. Important!!! Print this in the orientation that stl-file has, so layers won't separate while using the holder. I used 15% infill and that seems to be good amount for this.…
Simple window hook for MEAT. For hook buy in Makro: LINK Print instructions PLA infill 30%
Holds different numbers of bits securely and removably to the toolboard. Printing PLA/PETG .2mm any infill no brim, no supports print face down (or vertically with a brim)
Sortimentsbokse, 4 stk. Art. 71-815 https://www.biltema.dk/varktoj/varkstedsudstyr/sortimentskasser/sortimentsbokse-4-stk--2000041612
Biltema ST56 snow blower chute. It seems to be a whitelabel product from china so should fit a lot of other brands. The replacement chute that is of really poor quality and thin plastic costs around $60 so this is definitely cheaper. It…
Prints best bottom down. May need supports under hooks (depending on the printer). Examples are printed with PLA. Two sizes.
A wall mount for a biltema multimeter. This was made by 3d scanning a biltema multimeter.
Viele der langen Angeln sind sehr leicht und dünn. Die Aufsätze, die ich gesehen habe sind ziemlich schwer und für die leichten Biltema nicht geeignet. Deshalb habe ich etwas neues entworfen. Die Grundlage für die Befestigung der…
Updated 2026-02-20: A reinforced model is added because I hade a few snaps in different places. Mount in the center of the handlebar (31.8mm mount) next to stem. It is "off center" to be able to have it somewhat centered. I mounted it…
I needed a new holder for my 24–26" mountain bike mudguard (Art. 27-0006, Biltema Sweden AB) and this one is slightly longer too. Use the original bolts and thumbscrews. The part can be printed with or without supports, but preferably…
I made this hook for my Spiderbeam rod. The diameter of the tip is 6,5-6,6mm so I made the hole with 7mm diameter. You need 2 screwes M6 with nuts, it holds very good without force, you need to tighten the screws very smoothly. It will…
Made a mount for this small blue containers (102 mm x 71 mm) for Biltema pegboard. Made slots, so you have som flexibility .Holds two containers. Print with chamfered side of the skrew slots down on the print plate. 100% infill. 0.2 mm…
