Counting matching models…
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System hands, feet, and armor accessory elements produced by Lego from 2011-2016 for the Hero Factory and g2 Bionicle lines. All elements are…
This model is compatible with the lego system.
This model is compatible with the lego system.
The helmet files include: - Bambu Studio 3MF and GCODE files with full color data - Assembled, Casting, Solid, and Pre-separated Versions - Pre-separated into 19 keyed and interlocking pieces - Hollowed eyepiece to allow for electronics -…
I made a drill auger to drill into a potato, to have a vegetable-to-Bionicle adapter! & a pointy stabby spike on end. It can be used with either lego or bionicle plus shaped pieces, M or F.
This is test version So future releases may differ significantly, and cross-compatibility is not guaranteed or immediately apparent Please give me feedback! Just write it in comment, if you got any opinions or ideas Compatibility Stand…
The new Tahu Cosplayer minifig is great - but it's missing proper sword. Print him a new one! Use: 0.15 layer PLA works good SLOW SPEEDS - like 15mm/s Project is not exact original Tahu fire sword replica - it has been modified to be used…
I added a space for a plate under the minifigure. Perfect for new Tahu minifigure from new Lego cmf 29 series. This is a remix of the model by StawiamKlocki.pl
I remixed a stand for normal bionicle foot and i added a technic hole for small bionicle foot This is a remix of the model by StawiamKlocki.pl
Missing some details compared to the original, but also ~60% of the size. Does NOT include tiny fragile Hau. Face requires supports, “eyes” shouldn't.
The files available online from Stud.io parts packs were too low poly for my liking when increased to 300% scale, so I modeled my own version and split it into 2 parts for multicolor printing. To print both sections individually and glue…
Here are most of the parts required to 3D print 300% scale Bohrok. I converted the files from .dat files found in the Stud.io library, as well as some from the BioPak and SioPak part library releases. My custom modeled krana holder and…
The model for this piece available in the stud.io parts library was missing the notches for the Bohrok faceplate to latch into, so I modeled my own version based off of pictures of the original Lego piece. This model will require supports…
This model is compatible with the lego system.
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System frame/"bone" elements produced by Lego from 2011-2016 for the Heo Factory and g2 Bionicle lines. All elements are compatible with one…
I wanted to make a art collage out of bionicles, I modeled it on the Technic Connector Block 2 x 3 x 5 with Ball Socket, Bionicle Foot Joint I just used extra print to mount the foot -…
Model TL;DR Recommended versions moup_titan_5.0_runes_new (large/symbols as seen in the render) moup_titan_5.0_smooth (large/no symbols) moup_5.1_villager_runes (small/symbols as seen in the render) moup_5.1_villager_smoot (small/no…
!! THIS IS AN OUTDATED DESIGN AND IT WON'T GET UPDATED SINCE IT WON'T SHOW UP IN IF YOU SEARCH FOR IT. LINK TO THE NEW FILES: https://www.thingiverse.com/thing:4619526 !! 08.10.2020 I added 3.0 files with fixed ears they have not been…
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System armor elements produced by Lego from 2011-2016 for the Heo Factory and g2 Bionicle lines. All elements are compatible with one another, as…
Bionicle Matoran lettering for Happy + Birthday. Designed everything to be 1mm thick.
Description Wall boards for presenting the collection of Kanohi and Krana masks from Bionicle sets from 2001-2003. The head models have been modified for 3D printing to ensure durability. I placed holes on the back of the board to hang it…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Original ones didn't work well with my ender 3 pro and kobra neo. This part is edited for 0.4mm nozzle for easier printing on cheaper fdm printers
Used shell as a connector for those oversized World of Warcraft pauldrons. Generated through use of WoW model viewer. Basically made for a somewhat bland model on same skeleton as Hero Factory and Late Bionicle ordered online.
It's beam A 4m but with space for pin Included in: https://www.printables.com/model/1404798-various-custom-ccbs-pieces
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a model of the mask of creation from the G2 Era of Bionicle. The model has 3 variants each fitting the G2 and G1 Skulls. Category: Toy & Game Accessories
Inspired by World of Warcraft - mismatched 3dBenchy themed pauldrons for figures using Hero factory/Newer Bionicle skeleton.
This is a set of pieces that can be used to recreate the Bionicle Mini - Toa Inika Jaller figure at 500% scale. This figure was released in 2006. All of the stl files needed to create this have been included in the "stl files" folder…
This model is compatible with the lego system.
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System hands, feet, and armor accessory elements produced by Lego from 2011-2016 for the Hero Factory and g2 Bionicle lines. All elements are…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Used shell as a connector for those oversized World of Warcraft pauldrons. This time however i pulled more than just one pauldron, as i wanted to do whole set if possible. Generated through use of WoW model viewer. Basically made for a…
The Nuva Cube from 2003 Lego Bionicle lore. I wanted to make a nuva cube with a different inset color that could be done on any old single extruder printer, so I designed this multi-part model. The color of the core block shows through…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Complimentary to Armor Set - here i pulled Large sword and shield. As i used it for MOC skeleton - it seems the best fit is when you print at around 96-99% size - for nice fit i had to shave off a bit of axle with deburrer, hence cant…
Here's my model of the Mira mask from Bionicle, work by the Toa Lewa. I would scale it around 300% percent when printing it(I'm not quite sure in the exact scale yet).I'll have a painting and post processing video up sometime. Check out…
Here's my model of the Akaku mask from Bionicle, work by the Toa Kopaka. I would scale it around 500% percent when printing it(I'm not quite sure in the exact scale yet).I'll have a painting and post processing video up sometime. Check…
Since today is 810nicle day I figured I'd model a Bionicle mask so here's my model of a Kanohi mask, worn mainly by the Toa Tahu. I would scale it around 300% percent when printing it(I'm not quite sure in the exact scale yet).I'll have a…
Missing piece for pulled Arathi armor set - finally got it done. Category: Construction Toys
Based to Bionicle Heads both regular and Piraka. Based on AI generated Jack O'Lantern. Category: Construction Toys
The helmet files feature: - Assembled, casting, and solid versions - Bambu Studio Project and GCODE files to get started printing sooner! - Visor cutout template and ridge system. A version without the visor ridge is also included. -…
This model is compatible with the lego system.
The helmet files feature: - Assembled, casting, and solid versions - Bambu Studio Project and GCODE files to get started printing sooner! - Visor cutout template - Sizing slice to help with scaling, default scaled to fit 24.5"…
This model is compatible with the lego system.
This model is compatible with the lego system.
The helmet files include: - Bambu Studio 3MF and GCODE files with full color data - Assembled, Casting, Solid, and Pre-separated Versions - Pre-separated into 19 keyed and interlocking pieces - Hollowed eyepiece to allow for electronics -…
I made a drill auger to drill into a potato, to have a vegetable-to-Bionicle adapter! & a pointy stabby spike on end. It can be used with either lego or bionicle plus shaped pieces, M or F.
Upload request from fusionx963. Had this done and printed for a while now for my Krika build. Includes both a OBJ for multicolor print (tested on my A1 Mini) and a standard STL for single color (for use in a Thornatus V9 build). Category:…
Vultraz's Mask of Scavanging. Sourced from Stud.io, touched up in Blender, and tested to multi-color print using a Bambu Labs A1 Mini Combo. Retails axel hole and tested to work with Lego-compatible 2L Notched Red Axels. For best results,…
Made from scratch in Blender (with the handle lifted from Scemdex's Skrall Prototype Sword) this Skrall sword piece has been multicolor-print tested. (It's smaller than the actual part; I will update soon) Category: Construction Toys
Derived from fan-made Stud.io parts, this mask is fully printable and compatible with official and printed parts (axle might need slight sizing adjustments for the former) Category: Construction Toys
Taking the available files from Calamity's Digital Constraction Collection I was able to mod the mask from Toa Mata Nui's build into a Printable form for use on builds Still have work to do in order to look 1:1. Print Settings Printer…
This is remix of one of masks from here ____ Changes to original file: Scaled to ~800% to fit Prusa XL Painted supports for tree type - open in Prusa Slicer Mask oriented for minimising supports Mask pegs are separate gemetry Printing…
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System weapon and tool elements produced by Lego from 2011-2016 for the Hero Factory and g2 Bionicle lines. All elements are compatible with one…
A fully organic version of the Kanohi Hau mask from Lego Bionicle Part of the Mata mask series ATTENTION: Compatible only with the Metru head piece You might have to adjust the model depending on your nozzle size Category: Construction Toys
A fully organic version of the Kanohi Pakari mask from Lego Bionicle Part of the Mata mask series ATTENTION: Compatible only with the Metru head piece You might have to adjust the model depending on your nozzle size Category: Construction…
A fully organic version of the Kanohi Kaukau mask from Lego Bionicle Part of the Mata mask series ATTENTION: Compatible only with the Metru head piece You might have to adjust the model depending on your nozzle size Category: Construction…
A fully organic version of the Kanohi Akaku mask from Lego Bionicle Both versions (with scope attachment and without scope attachment) available Part of the Mata mask series ATTENTION: Compatible only with the Metru head piece You might…
A fully organic version of the Kanohi Miru mask from Lego Bionicle Part of the Mata mask series ATTENTION: Compatible only with the Metru head piece You might have to adjust the model depending on your nozzle size Mask is kinda big,so…
An organic version of the Kanohi Kakama mask from lego Bionicle Part of the Mata mask series ATTENTION: Compatible only with the Metru head piece You might have to adjust the model depending on your nozzle size Category: Construction Toys
This model is compatible with the lego system.
This is test version So future releases may differ significantly, and cross-compatibility is not guaranteed or immediately apparent Please give me feedback! Just write it in comment, if you got any opinions or ideas Compatibility Stand…
This is test version So future releases may differ significantly, and cross-compatibility is not guaranteed or immediately apparent Please give me feedback! Just write it in comment, if you got any opinions or ideas Compatibility Stand…
The new Tahu Cosplayer minifig is great - but it's missing proper sword. Print him a new one! Use: 0.15 layer PLA works good SLOW SPEEDS - like 15mm/s Project is not exact original Tahu fire sword replica - it has been modified to be used…
I added a space for a plate under the minifigure. Perfect for new Tahu minifigure from new Lego cmf 29 series. This is a remix of the model by StawiamKlocki.pl
I remixed a stand for normal bionicle foot and i added a technic hole for small bionicle foot This is a remix of the model by StawiamKlocki.pl
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
The kids were playing with a building toy and one of the longer rods was broken, so I told them I'd make them a new one. This one fits perfectly - if the ends are too tight in the connectors, file them down a wee bit. Recommend organic…
This model is inspired by the iconic Rhotuka Spinners from the 2005 BIONICLE era. It recreates the recognizable circular frame and three-blade design that made these spinning projectiles one of the most memorable features of the BIONICLE…
