Counting matching models…
Remixed to remove the faceting on the model. Spikes pictured printed using 0.2mm nozzle at 0.1mm layer sliced using Prusaslicer. 0.4mm nozzle will work fine as shown in the makes section.
Use these 1250 names and words on your Crocs to customize them (jibbitz)! If a name is missing or you need other words, you can easily create the STL using the included OpenSCAD file (See “Customizing” below) Or use the online customizer…
This is a combined version of the model from thingiverse so the 2 don't have to be glued together I recommend printing with supports and a brim as the part is small and will probably come of your build plate without it
A simple connector piece for you to make your own Jibbitz for your Crocs. These tend to glue down best with an epoxy adhesive or UV cured resin. It also doesnt hurt to potentially paint or clear coat these connectors for some added…
This is a NO SUPPORTS NEEDED base for a crocs jibbitz/charm. My nephew asked if I could print him a soccer jibbitz/charm for his crocs. I said sure, but then I couldn't find a jibbitz base to print without the need for supports. Even…
A small sword or pickaxe from Minecraft for your crocs
Modeled the base and one with a blank flat round top. Both are ready to add your own embellishments. Printed with supports, PLA+ works great but TPU would also be fun.
All new designs! Three different heights, and three different bottom designs. Printed at 0.16mm layer height on my Bambu Lab P1P using PolyTerra Matte Charcoal Black: https://amzn.to/3F4Dv7d Heights: 15mm 18mm 21mm Bottom design: 45…
Ever wanted to Rock your Crocs? No? Me neither. Well, now you can anyway.
I made the base of the ears stronger and enlarged them. I smoothed out the back of the nose and enlarged it. NOSE Infill 20% Supports: yes 0.2 quality PETG or PLA Filament EARS Infill 20% Supports: yes 0.2 quality PETG or PLA Filament
Use the included 360 emojis on your Crocs to customize them (jibbitz)! Press “Download STL” to find them all. If an emoji is missing or you need different sizes, you can easily create it using the makerworld customizer ! Or the included…
Spikes for your crocs! Warning: They are very sharp If you like/find this model useful, please like it! It helps support me and doesn't cost you anything!
Alphabet croc jibbitz! i printed mine with a standered 0.4mm nozzle and they look great. I reccomend printing with no fan to maximize durability. I also reccomend slicing a filament change in at layer number 5. I used 3D Gloop to fuse the…
Needs some supports Needs a durable filament material because they can break easily when wearing them. Can be paired with the nose from the last upgrade.
Fortnite Victory Crown Croc Charm /Jibbitz
egg fry croc jibbitz use to pause at height
icecream croc charm jibbitz enjoy Category: Fashion
Capybaras to make your crocs look awesome
I have printed it, just do not have a photo. Prints very well, just need to glue to jibbit
Update 2: Added insert caps that fit inside existing sprinkler caps to seal off water flow. I found these work better as you don't need to worry about cleaning up threads. It's also using less material. Update: After being in service for…
Minion Bob auf deinem Croc... ;-) Muss mit Stützen gedruckt werden. Kann nach entfernen der Stützen einfach in die Löcher der Crocs eingesteckt werden.
Son pins para poner en tus crocs.
Labubu Charm for Kids' Crocs Snap-n-Twist pin design. Pin is custom-sized for Kids' Crocs holes. No supports needed. Pin models with different tolerances are available @…
Pac-Man & Ghost Clog Charm / Croc Jibbitz. Both .stl & .3mf files available. Check out my other models here 👀 Hope you enjoy and happy printing 😎
This is a Heart shaped Croc jibbitz. You should print with tree supports if your printer struggles with overhangs.
Couldn't find a Jibbitz I liked that was a cross. Found Deadhorn's Cross, which I liked. Used Tinkercad to add the Crocs portion.
I liked the skull design number one and placed a modified jibbitz button under it so it could used as a Crocs shoe accessory. Print settings: .2 layer height, 15% infill supports A 17 minute print on MK4 with input shaping enabled with…
Model Stanley Cup Jibbitz for Crocs Note: I have had difficulty printing the text with .4mm nozzle, so for that reason I decided to include a file of the cup that has no text at all. This will print the easiest and fastest. Supports: If…
Cute Mini Animals Charms for Kids' Crocs Snap-and-twist pin design. Pin is custom-sized for Kids' Crocs holes. Supports required for some of the charms. Pin models with different tolerances are available @…
This print will need supports I recommend 10-20%, if your 3d printer is slower you might want to lower this but it is a small print and won't take very long. It should fit into crocs, might need scaling depending on the size of your…
korean heart crocs charm Category: Fashion
It is a dog jibbitz(2 models combined)
crown croc jibbitz use to pause at height
Introducing the Among Us Crocs Jibbitz! Designed for standard FDM machines without multicolor capabilities, Color can be added through Slicer M500 (pause at layer) Commands. The jibbitz looks best with as opaque light & dark filament!
I added 2 models together for this model. Put these on your crocs!!
This is a rabbit jibbitz or charm(i put 2 models together)
Step up your shoe game with our adorable Frog Jibbitz. This fun and quirky accessory, perfect for all ages, instantly transforms your clogs into a conversation starter. Crafted from high-quality, durable material, it not only adds a pop…
For those who want the looks of their croc to show how comfortable they are.
UPDATE okt. 30 2025: Added a updated 120°-version AND a 90°-version, as requested by hart_3831848 Seperate items! ************************************ I learned that the original Bitzenburger Fletching jig, an old but excellent fletching…
Pixel dino fled Chrome for your shoe to stop dodging cacti. Now ruling prehistoric style & offline mode.
Human Skull Charm for Kids' Crocs Snap-n-Twist pin design. Pin is custom-sized for Kids' Crocs holes. Supports required for the charm. Pin models with different tolerances are available @…
Use these spooky crocs charms / jibbitz, available with 1250 different first names on your Crocs to customize them! If a name is missing or you need other words, you can easily create the STL using the included OpenSCAD file (See…
use supports but just on the overhang of the rock on the rock the frog doesnt require any. i used 15% infil and coloured it on the bambulabs slicer to make it look fantastic.
I love my crocs, and I also like my charms. But I have a LOT of charms laying around. Then my sister wanted a keychain for her backpack and my brain clicked: let's make a jibbitz compatible keychain! So I designed this keychain in…
Mickey and Minnie Mouse Charm for Kids' Crocs Snap-n-Twist pin design. Pin is custom-sized for Kids' Crocs holes. No supports needed. Color change required for Minnie's bow. Pin models with different tolerances are available @…
Minecraft Creeper Charm for Kids' Crocs Snap-n-Twist pin design. Pin is custom-sized for Kids' Crocs holes. Update (6/25/2025): Charm v2. Changed from a snap-pin to a snap-and-twist pin design for a more secure fit. Available in 2…
Croc jibbit of idol from Indiana Jones.
Made this little mushroom croc accessory for the sake of the community
must print with supports. the ones pictured were printed using tree supports. black one is PETG purple is PLA both seem strong.
after losing many, many croc jibbitz, i decided to fix the issue just pop this ring on the top of the part of the jibbit that goes in the croc hole that's confusing… you'll figure it out ;) also it only took me like 7 min to print with a…
Capybara Charm for Kids' Crocs Snap-n-Twist pin design. Pin is custom-sized for Kids' Crocs holes. No supports needed. Update (6/25/2025): Charm v3. Changed from a snap-pin to a snap-and-twist pin design for a more secure fit. Update…
Car Logo Croc / Clog Charms Collection Show off your favourite car brand with these easy-to-print Croc/clog charms. This collection currently includes: Citroën Honda Hyundai Lexus Mazda Mercedes-Benz Mitsubishi Opel Renault SEAT Škoda…
Basic Base: 100% infill No Supports PETG preferred, I found PLA to break easily Layer Height 0.2 Enamel Pin Base: 90% infill No Supports PETG preferred Layer Height 0.2 Brooch Pin Base: 90% infill No Supports PETG preferred Layer Height…
This is a four charm display for the Crocs Jibbitz not in use. It uses two 8x2mm magnets for easy mounting to your fridge, whiteboard, etc. I also created a small triangle foot to be used when displaying on a counter or shelf. The foot…
Dragon Charm for Kids' Crocs Snap-n-Twist pin design. Pin is custom-sized for Kids' Crocs holes. Supports required for the charm. Pin models with different tolerances are available @…
Cinnamoroll Charm for Kids' Crocs Snap-n-Twist pin design. Pin is custom-sized for Kids' Crocs holes. No supports needed. Update (8/29/2025): Charm v4. Multi part option is added. Update (6/25/2025): Charm v3. Changed from a snap-pin to a…
Use SVG to create custom Crocs Charms! Some earper inspired charms included. Use OpenSCAD or the online customizer feature here . Just print the names with a filament color change, clip them onto your crocs (they stay without glue) and…
When I printed this I defined a cylinder around the part that connects with the Croc and increased the density to 80%. The simple thing to do is just increase the density for the entire model. If you just print at 15% it won't be strong…
Already oriented for printing, doesn't need any supports. takes about 20 minutes to print at 0.2mm layer height on an ender 3. should fit nicely
Plants: There are 5 different sprouts to spruce up your life: Fern, ZZ Plant, Seaweed, Money Plant, and Grass. Orient each plant so that it prints flat on the print bed. Infill 15% No Supports Layer height doesn't matter Once it's done,…
Give your Crocs a unique touch with a stylish, Volkswagen-inspired logo charm! Lightweight, durable, and finely detailed, this Jibbitz is the perfect accessory for any VW enthusiast looking to personalize their footwear. The charm is…
A jibbitz that allows you to show off the greatest beverage ever made on your crocs. Printed with in PLA with a 0.2mm nozzle and 0.05mm layer height. As with most jibbitz I used 6 walls and 100% infill. Grid supports seem to come off the…
yankees croc jibbitz charm MUST PRINT WITH SUPPORTS (i used tree) printed in multicolor on bambu p1s but can be single color
Ferrari logo jibbitz, don't really know what to describe I used PLA 100% infill pretty sure
Remixed the original holder in Fusion 360, adding magnet holes. Plug remixed in OpenSCAD, wire slot width was reduced.
PETG or ABS recommend since this will be outside most the time. I used a brim for the bed adhesion 10 walls to make the whole print walls. Left 15% infill
jibbit for crocs, need supports, printed in 0.2mm PLA.
Update Dec 2025 Added "Double Tolerance" base file an increased tolerance (originally 0.05mm, increased to 0.1mm) on slot between based and display Added "High Density" display file - moar holes for a collection of smaller jibbitz Feel…
A skateboard charm (jibbitz) for your Crocs. This croc charm is designed to be used with these Button Ornaments sold by Bambu Lab which come in a pack of 50 for $1.99. I have also attached a 3d model of this, but it will require supports…
Jibbitz croc base for smaller kids Crocs 0.15 layer height Printed using PLA with no supports
Print face down with tree supports.
This is a Croc Jibbitz (those little charms that fit in the holes on top of the shoe Crocs) that receives a 3/8" socket. Never lose your 10mm socket again: just keep it on your Croc and it'll always be a leg's length away!
Ran out of buckles for custom 3D printed Crock charms, so designed these and printed them in TPU. This will bail you out in a pinch. For best results print in TPU with supports. Please note that the the larger surface is meant to be glued…
Add a picatinny rail to your Crocs! Hardware: 2 x M3x8 Category: Hobby
Kdrama heart hands jibbitz pla
Six bold football-themed clog charms, with flat colour regions, thick outlines and simplified printable details. These fan-style icons do not use club, brand, sponsor or manufacturer logos. Curious about making your own designs? Have a…
Volkswagen Croc / Clogs Charm Add a subtle VW touch to your Crocs or clogs with this simple push-fit charm. The design is made to be easy to print without requiring an AMS, using just a single manual colour swap. Print Settings 0.4 mm…
An Atlanta Braves jibbitz (croc charm) that doesn't require MMU. My print settings: 0.2mm nozzle, 0.05 layer height, 6 walls, 100% infill, grid supports, PLA, concentric top shell. Color changes at 7.25mm and 7.65mm.
This Michigan state croc charm will knock your crocs off! I recommend you print with supports or flip the model to print without. Dimensions (all at longest point) L ~ 18.75 mm W ~ 16.2 mm H ~ 11.25mm
0.2 mm nozzle 0.05 mm layer height 0.15 mm initial layer height 6 walls 100% infill Concentric top surface grid supports Feel free to play with the settings, but the above is what I used and what you see pictured. Filament switches are at…
A washer to keep your Crocs charms / Jibbitz attached to the crocs. Snap these over the back of the charms to prevent the charm from accidentally popping out of the holes in the Crocs. They are fully customizable, even with a few letters,…
A standard Croc Jibbitz with a phillies logo
No supports needed if you are not picky with details. Otherwise bottom of ears needs some organic support. .10mm layer for good detail.
A jibbitz (croc charm) of the Tardis from Doctor Who My print settings: 0.2mm nozzle 0.05mm layer height 100% infill 6 walls grid supports
Classic Space Invaders Clog Charm / Croc Jibbitz Both .stl & .3mf files available. Check out my other models here 👀 Hope you enjoy and happy printing 😎
Print with brim for easier support removal. Otherwise, standard print settings. White TPU can be colored with black Sharpie. Onyx can be colored with silver Sharpie.
My Son loves outer space so I made our Planet Magnets into Jibbitz for his Crocs (AKA Future Shoes)
Sliced for Prusa XL, so adjust the settings if you print with a different printer.
Dog Pawprint and Yin & Yang Clog Charms / Croc Jibbitz Both .stl & .3mf files available. Check out my other models here 👀 Hope you enjoy and happy printing 😎
A jibbitz (croc charm) with the Royal Caribbean logo. My print settings: 0.2mm nozzle 0.05mm layer height 0.15mm initial layer height 1 wall 100% infill Archimedean Chords top surface Filament swap at 7.30mm (layer 170) Grid supports
A little hotdog with mustard jibbitz (croc charm). Only requires 3 filament swaps at 9.35mm, 10.35mm, and 11.15mm. My print settings: 0.2mm nozzle 0.05mm layer height 6 walls 100% infill concentric top layer
