Counting matching models…
With this space saving stand you have lots more space on a AV rack to put on your converters for the job. It is universal for all well known rental used converters between a thickness of 17 to 30mm (from 11/16 to 1 3/16). there is Velcro…
Rackmount for up to 16 Blackmagic Mini Converters. The set consists of 4 parts that can be screwed together.
Prevent Damage to Your Blackmagic Converters with This Strain Relief there are 3 separate models. to fit the most popular converters. Keep your Blackmagic Design converter secure and fully functional with this specially designed cable…
Original cover was way too thin, flimsy in PETG so I made it about 3mm thick and fixed the STL errors. Enjoy!
Halterung für Teradek Blot 6 an Blackmagic URSA mini 4.6k Kamera Mounting bracket for Teradek Bolt 6 on Blackmagic URSA Mini 4.6K camera
use it to slightly angle the monitor for better viewing when placed on a desk or lectern
With this space saving stand you have lots more space on a AV rack to put on your converters for the job. It is universal for all well known rental used converters between a thickness of 17 to 30mm (from 11/16 to 1 3/16). there is Velcro…
Rackmount for up to 16 Blackmagic Mini Converters. The set consists of 4 parts that can be screwed together.
Hi all, This is a templates for the P6K side plate, should you want to create your own accessories. Enjoy!
Hi all, This is a little accessory that will allow you to mount a ¼ 20 UNC threaded insert to the front dovetail of Blackmagic Design's Cine Handle. In order for this to work, you'll need: M4 Threaded inserts no longer than 6.3mm, I Used…
Hi all, This is a little accessory that will allow you to mount a ¼ 20 UNC threaded insert to the top dovetail of Blackmagic Design's Cine Handle. In order for this to work, you'll need: M4 Threaded inserts no longer than 6.3mm, I Used…
Hi all, This is a small adapter that allows you to use a Tilta BMPCC top handle (TA-QRTH) on the P6K. You'll need: ¼ inch threaded inserts. I used these 3x ¼ inch screws, like in this kit I printed my kit at 0.2mm with CF-PLA for…
1U rackmount, consisting of 4 screwable individual parts for Blackmagic MiniConverter.
BMPCC 4k/6k mod that solves a few problems with the BMPCC line: 1. Vastly improved battery life/low cost with NP-F batteries, and flexibility to balance weight/run time with NPF 550/750/950 support. Also add 2 standard 5.5mm output power…
This is for getting the full frame field of view and depth of field. Existing speedboosters for the BMPCC6k are expensive. This one is DIY and can be done for about $150 US - the cost of a standard speedbooster. That's because all you…
This is a screen cover I made for my BMD 12g Video Assist 7". The face of this is meant to flex allowing for it to be attached and removed without breaking. Printed in bambu labs matte PLA. Angles could definitely be refined for cleaner…
Ich habe ein abgewinkeltes Gehäuse für den Blackmagic Speed Editor entwickelt. Es ist um 20 Grad geneigt, was die Benutzerfreundlichkeit deutlich verbessert. Es fügt sich der Form des Editors an. Ich hoffe, dass es jemandem gefällt. Die…
Its very easy to print. You dont need any supports. We wanted a system that is robust and easy to fix if something breaks. The converters sit in the pocket without play and can be pushed hard from the front without falling out. But it is…
Mounting a Blackmagic Design BiDirectional SDI Converter to a DAP 2HE 19" Rackmount . Combine with other available Parts for RasperryPi and others. Replace the existing M3 screws on the bottom with two M3x8 or better M3x9
Prevent Damage to Your Blackmagic Converters with This Strain Relief there are 3 separate models. to fit the most popular converters. Keep your Blackmagic Design converter secure and fully functional with this specially designed cable…
Fiber optic converter mount for Blackmagic URSA camera. Incl. gear ring
here is a rack for the mini fiber converters from blackmagic, they can be clipped together.
Components: - Matek BEC12S-PRO 3-12S 5/8/12V 5A - Pasiv Cooler 23 x 23 x 6mm - 4x M2 heat thread
RackPi Style Mount for Multiple Blackmagic Design Micro Converters (see STL names) on DAP 19'' 2HE MP-1. If a Converter is missing that you need, write me a message and i'll ask some measurements to add it. Tested on this printable…
Replacement for the audio dials of the Blackmagic Design URSA Mini Pro 4.6K (G2) and 12K cameras, which tend to break quiet easily. I resized my preferred design of the original models, so it fits perfectly. The original models were…
Made these modesl myself on tinkercad. PLEASE NOTE: You will need to buy longer screws! I bought a 50 pack on Amazon for about $6, search for these: M3 x 8mm Countersunk Flat Head Machine Screws One bracket is for the “top” side, and the…
Small side hook to attach the converter with a zip tie or a 1/4" screw to your camera. You will need two M3x8 screws to attach it. I printed them in PETG.
Small side hook to attach the distributor with a zip tie or a 1/4" screw to your camera. You will need two M3x8 screws to attach it. I printed them in PETG.
I needed a wall mount for a Blackmagic power supply. 25% Rectilinear 4 walls
IMPORTANT: There are many different Blackmagic micro converters all named very similarly. Please confirm that your unit's name matches verbatim to the model name! ~Blackmagicdesign Micro Converter SDI to HDMI 3G I made this model to mount…
IMPORTANT: There are many different Blackmagic micro converters all named very similarly. Please confirm that your unit's name matches verbatim to the model name! ~Blackmagicdesign Micro Converter BiDirectional SDI/HDMI 3G I made this…
Protective insert for the Milwaukee Packout case to protect Blackmagic 6k studio camera and the lens on the way. Recomendation is to print the insert out of TPU or TPE to add protection. I printed it with this filament (2walls 5%infill)…
Samsung T7 Holder for the Blackmagic Pocket Cinema Camera 4K (or really any camera with a tripod hole) Prints fine without supports, about 30% infill is fine. You'll need either a screw or a nut (1/4-20 UNC or 3/8-16 UNC) to attach it to…
During a recent production, we noticed the absence of a suitable stand for SDI to HDMI or HDMI to SDI converters that could be securely mounted on production or DSLR camera rigs. I used Blackmagic Design’s BiDirectional SDI/HDMI 3G as a…
Designed to reduce camera vibrations during live music events. Used best for shots of DJ booth.
I recently found out the LCD screen on one of my OG’s was damaged in transport and is now bruised. Well, I won’t let that happen to my other OG. I designed this screen cap. You can add the magnets and it attaches to the Kinotehnik frame…
Holder piece for the Blackmagic HDMI-SDI Micro Converter. The bottom side of the piece has a tripod mount screw socket . I used it with a cold shoe adapter to mount it on top of my camera. However, you can also connect it directly to a…
Did a remix so it could be mounted on a flat surface. Titled the design for better cooling.
Model These adapters allow you to attach a Blackmagic Micro SDI -> Hdmi converter to the SmallHD501 but the adapters should work on other monitors with LP-E6 battery slots. Print Settings I would highly recommend printing this with 3+…
Model This is a right angle bracket and nato rail to help attach a Blackmagic micro converter to your rig, tripod, drone or live streaming station. The bracket uses the original screw holes to securely attach to the adapter. Parts needed…
Original cover was way too thin, flimsy in PETG so I made it about 3mm thick and fixed the STL errors. Enjoy!
Top mount for various accessories, I made an SSD holder for the Adata SD810. M3 screwholes are spread out 1cm apart from each other in a grid. SSD holder printed in TPU so it grips well, use a 22mm M3 screw and a nut, use countersunk…
Is a simple shape to protect screen of BMD video assist 4k, print face down without support, i choose to print 0.1 slower to have best protection for my VA. If you like, you can paint internal part of logo :-D
Holder for Streamdeck XL on a Blackmagic Studio 8 ISO Video mixer.
Rackmount for 2 Microconverters (SDI<->HDMI Bidirectional)
The low cost bluepill board can be converted into a blackmagic probe, which supports JTAG/SWD debugging of many targets. To do this DFU/blackmagic.bin is needed, can be programmed onto the stm32 using serial bootloader or with an STLINK.…
The Blackmagic converter box itself has no means of mounting, so we made a custom bracket that allows you to mount the converter with either male or female 1/4-20" threads. As an added bonus the bracket protects it from drops as well.
A snug light-weight holder for SDI Converter. For the BlackMagicDesign Mini Converter SDI Distribution. Strap it down and secure it with a tie band. No Velcro needed to gum up gear. Cradle helps keep a snug fit and also adds a port…
Clip on cover for the super bright flashing lights around the drives on the Blackmagic Cloud Dock.
This bracket can be used to lay the BMD eGPU or eGPU pro on its side instead of it standing vertically. It has slots in various areas to run straps through to secure the eGPU to the bracket. I use them to mount the eGPU in a rack on a…
I know there a donzens of those Samsung T5 SSD holders available for the Blackamgic Design Pocket Cinema Camera 4k, but I thought I give it a go. Biggest difference: SSD can be slided in and snaps with the back latch, so the supplied…
A clip together sun shade for the Blackmagic Video Assist 5" unclips and lays flat to easy fit in your bag. print using PLA+ or preferably PETG.
A clip designed to hold your BM converters onto the Honeycomb storage wall . I use the honeycomb storage wall to make a quick setup with the atem mini mix , converters and cable clamps . These are the converters I have. If you are missing…
I've made it a bit less high to fit the dimensions of the mini converter, also I moved the screw holes a bit to fit better. I've added screwholes at the backside for storing the original screws. Also there is another file which is meant…
I recently received a smallrig cage for my Blackmagic 4K, it was second-hand and the seller hadn't included the fixing screws. The screws themselves were easy enough to get but this plate is custom to smallrig and seems difficult to get.…
Single Blackmagic Mini converter vertical stand. You can put serval side by side.
Support for holding 4 Blackmagic design mini converters.
Blackmagicdesign Mirco Converter BiDirectional SDI/Hdmi Holder The converter slides in and does not slide out. I sliced with Cura and used tree supports for overhangs. Cheers Print Settings Printer Brand: Creality Printer: Ender 3 Rafts:…
Mounting bracket for Blackmagic Design converters. Utilizes the screws from the converter housing.
I needed to record to a T5 SSD from a Blackmagic Hyperdeck that is mounted in a Teranex Shelf. The Teranex shelf comes with 2 blank spaces for when you only have one device to fit ⅓ of the rack space. This will take up one of those…
Designed for our TV Studio 4K it will probably fit all modern (2018+) panels and surfaces.
This bracket is for mounting a Blackmagic ATEM Mini Extreme onto a Penn Elcom R1290/1U Sliding Rack Tray. Use 10-24 bolts and square nuts. (Washers also advised.) The left bracket is provided - just mirror it in the slicer to get the…
Table mount for the micro converter bidirectional from blackmagic. It fits the 3G and 12G version. Fits table with a 7cm thickness. Holds two converters.
Snap in cover to protect the screen of the camera during transport. Remixed from Abbott_Daimler's sunshade model.
I needed to hold a set of Blackmagic Design micro converters in a tidy way. Fortunately they have a nice hole pattern on the side (34mm spacing), which was easy to adapt to DIN rails. My design forces space between each converter since…
Two-Piece Dust Cover for the Blackmagic Speed Editor. With easy to print thread. I don't know what to say… it's arguably the best design for the task :)
This sleeve is a part of a mounting system that allows you to mount converters, screens and other video hardware in rack units, on walls and on tri- or monopods. The sleeves connect to other parts of the system with a locking dovetail,…
For aditional functionality you can use this SSD holder for back of the cage.
This piece is specifically designed for the URSA Mini Pro 12K and Samsung T7 series' cables. An M2 10mm bolt is used to fix the part to the camera, the USB C cable is pressure-fit. To make things extra secure, you can epoxy the cable to…
I really loved the U Bracket from Andycine for the Ninja V, but they did not make one for the Blackmagic Video Assist, so I designed one in the spirit of that bracket. If they ever make one, I'll immediately purchase a metal one from…
I Designed a Mount for the Blackmagic Micro Studio 4k G2. I you use a cage and a dummy battery you cant mount something flush to the back. so i build this extension which extends the cage that you have a flush mount on the back side with…
Adapter to fill the gap when using a Sandisk Extreme SSD. There are two versions of this drive from what I know though. I tried to modify another file that was for adapting the T7, but since this has a weird angle, I ended up having to…
Bolt to keep the Smallrig cage for the 6K/6K Pro cage aligned to the 6K Full Frame. This is not for full support to hold down a rail or anything like that. I just didn't like the wobble it had without some support. I also wanted it low…
this is a remix on Caleb pikes pelican case insert for the black magic case, it is raised by 10mm and has holes
Drive bay for Samsung T5/T7 SSD for Blackmagic Design Micro Camera 4k G2 You can use it with any USBC cable but for extra neat look it is designed for this 10cm double 90degree cable. Designed to use with this camera cage.
This is a holder for the Blackmagic SDI converter. It´s meant to be on a camera tripod. The part has a space for the velcro to be used.
Lens hood for the Blackmagic Studio 4k, may work with the studio 6k. Designed to cover the Panasonic 45-175mm zoom lens and make the camera look better proportioned Printed in PETG-CF with a 0.6mm nozzle. Files include branded and…
