1 / 1
Mount for Blackmagic SDI to HDMI Converter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my first model, actually, the whole reason I bought a 3d printer. Hope this helps someone else too!
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 62
- Makes
- 0
- Views
- 482
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made these modesl myself on tinkercad.
PLEASE NOTE: You will need to buy longer screws!
I bought a 50 pack on Amazon for about $6, search for these:
M3 x 8mm Countersunk Flat Head Machine Screws
One bracket is for the “top” side, and the other for the “bottom” side. I only added one hole in the middle because I will be mounting these to a faceplate where our SDI connections are on the wall behind our TVs.
No real suggestions on printer settings, I just print with all defaults, but you're welcome to comment on improvements.