Counting matching models…
This is a parametric boomerang design for a triblader. Parametric means that you can change around a lot of variables, like the angle of the wings, the number of the slots in the wingtips etc., and the model will update accordingly. It's…
Printed at about 150x150 millimeters and 9 grams, this is truly a pocket-sized boomerang. Depending on tuning, it will have a range of about 8 - 15 meters, so it should be fine for backyard use, if your backyard is large enough. I don't…
A case I designed for Nuand's bladeRF 2.0 micro. The case has a lip top and bottom to index the case halves together, and the two pieces fasten with 1" long 2-56 screws and captive nuts at bottom. The non-MMU top has an embossed RF…
This is called "TF Mod" because I carved the original out of a commercially available TriFly boomerang by Eric Darnell. I consider it a slightly more relaxed version of one of my first tribladers . The holes are intended to slow down the…
A fun little triblader boomerang made in Blender. Print instructions Category: Sport & Outdoors Summary A fun little triblader boomerang made in Blender. How I Designed This Video Tutorial Companion Article The new idea here (at least for…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Recently I saw some very strange three blader like this in the "World of Boomerang" group on FB, so here's my interpretation of that. How I Designed This Made in Onshape. Have a look at the document to see how it was constructed.
A fun triblader for recreational throwing. Made in Blender using a non-destructive workflow, so you can easily manipulate some control points in the Blender file to change the shape. The model might be a bit too large for many printers,…
This is a variation on my first boomerang design that I made in 2011. It is a slightly more refined shape, but it still only consists of a bunch of lines and circular arcs lofted into the third dimension. The plain one had a tendency to…
I wanted to play with different print processes for different parts of my models, so I created this pretty ordinary triblader design with a strengthening spine. The idea was to keep the boomerang pretty low density with little infill and…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I liked the asymmetric look of my previous boomerang , so I decided to pursue the idea a little further. This one has a kind of melted cheese, Maniac Mansion, Calvin & Hobbes-ish look to it which I quite like. I made sure to center the…
Haven't found any badges with Rick Deckard's Number so I made this one. Probably only suitable for SLA/RESIN as it contains some fine details I have not been able to replicate on my FDM printers.
This is a mini version of blader X's mask. It is a work in progress, so be careful printing
Following up on my Propeller Key chain I decided to make a bigger version that uses a 22mm diameter ceramic bearing to increase the rotation speed and spin duration. You need a 22mm bearing to be added in the center of the Frame Enjoy!…
Scale the model to your desired size. Use ironing for best results.
This is my take on a case for the BladeRF SDR with the XB-300 amplifier. It gives access to all the ports of the BladeRF and the default ports of the XB-300. Print instructions I recommend using PETG with 0.2 layer for the details of the…
This is the emblem from the flying "Spinner" cars from the movie "Bladerunner" How I Designed This Category: Signs & Logos
Two kinds of asymmetric tribladers. The green one is in the files called "wonky three", the purple one is even more squiggly and is called "wonky three 2". There are also "blunt" versions, which have an airfoil with a little more drag…
This is similar to thing:107862 and thing:128146, except that it has shallow recesses in the underside that should fit 1 Euro cent coins when printed at the maximum size (203 mm wide) of an HP DesignJet. There is also an OpenSCAD file…
A triblader boomerang with fun, squiggly wings; for recreational throwing. Made in Onshape; the document can be found here .
Tyrell Genetic Replicants - More Human Than Human, License Plate Frame Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
All those moments will be lost, like tears in the rain... Category: 2D Art
What a POC for a 10" rack POC for a modular compute blade 1U system very shallow depth (~100mm) Why Modularity, I like the idea you could swap out some of these with a custom module. 10" rack width and limitations of my Prusa Mini's bed…
For original Rockwell RK7320 BladeRunner (not X2) with dust collection drawer (front bottom). This is a 2.5" (female) shop vac hose retrofit kit/adapter to allow a Ridgid vacuum (or other brand with standard 2.5" hose connections) to suck…
LAPD Police 2019. Category: Signs & Logos
Another thrift store find that did not have all parts. The 6mm knob is used on several parts of the machine. It requires a 6mm nut to be glued in. The vacuum attachment was missing. I created one that fits with the approximate size 32mm…
The Bladerunner is effectively a Voidrunner with some cosmetic retouches and some slight hardware variation. It retains the same compatibility with the same motors, flywheels, machined cage, and BCAR. Bill of Materials: x2 M3x20 x3 M3x25…
This is intended to be a reference model for creating designs around the BladeRF x40 as well as the XB200 expansion module. Measurements are partially retrieved from https://www.nuand.com/bladerf_top.dxf, but many are just measured with…
Alpinestars Airbag TechAir 5 plasma comes with a testing kit, to use in place of canisters, to test integrity of the bladder. Since all my motorcycle tools are stored in gridfinity, this is a dedicated bin for storing this specific tool.…
What a POC for a 10" rack POC for a modular compute blade 1U system very shallow depth (~100mm) Why Modularity, I like the idea you could swap out some of these with a custom module. 10" rack width and limitations of my Prusa Mini's bed…
Bladerunner - Roy Batty - Rutger Hauer - 1982 3D printable model.
Bladerunner - Roy Batty - Rutger Hauer - 1982 3D printable model.
This is our take on the iconic PKD from Bladerunner with a new look for your printing pleasure. The kit is made from multiple pieces so you can print them all in the correct color. This kit goes together with real screws, which are listed…
