Counting matching models…
KDxGP BMCC - A BMC Clone Check out my socials and other things at https://linktr.ee/KDxGP Like my creations? Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP. Thank you! Instructions On the top/lid there is no hole for…
Garmin Varia RTL 515 holder for the D-Shape seatpost of the 2024 BMC Roadmachine Design inspired by Varia RTL515 D Seat Post Mount from @DaveK , but i created it myself from scratch in Solidworks. Printed in PETG, 0.15 STRUCTURAL with 4…
With this model you can mount your jk inverter bms on any flat surface with screws. To mount this holder to bms you need 6pcs m3 nuts, 6 pcs m3*35mm srcews.
Model This project is still a work in progress so there are no instructions for detailed assembly yet, if you are keen to try the cage out pick up two 32mm Rosette plates and some 3/8"-16 to ¼"-20 Screw adapters to reinforce the 3d…
I lost the covers to the MTT system on my BMC URS. These are a pretty good fit replacement. I haven't had a chance to try riding with them yet to see if they stay in place however. The FreeCAD file is a work in progress and still has some…
Piccolo supporto compatto e stabile per BMCU370 LITE (ams lite clone), messo al posto del porta bobina. Ho sfruttano le viti originali per fissare il piccolo aggancio sull'asse z mentre per fissare il pezzo grande all'BMCU ho usato 3…
🧵 Modular Filament Holder (example: for BMCU) This filament holder is designed for 3D printing and is ideal for setups like BMCU. Each base module holds 2 filaments, and thanks to its modular design, you can easily stack and expand…
This is the Part that goes under the plastic bit of the ICS01 Spacer.
Snap in cover to protect the screen of the camera during transport. Remixed from Abbott_Daimler's sunshade model.
🔧 Friction Reducer for PLA Spools – Optimize Multicolor Printing 🎨 Transform your multicolor prints with a simple yet incredibly effective system! This friction reducer is designed to improve filament flow in the BMCU, reducing stress on…
I didn't like the usual cylindric spacers. BMC is using special spacers for their stems, but on my bike I use a stem from Ergotec. So I made a custom one to fit both forms. The bottom part adapts to BMC MSM “topcone”, the top part adapts…
This sleeve was designed for a 2011 BMC RM01 seatpost, but fits most D-shaped BMC seatposts of that era. The main purpose of the sleeve is to prevent the bike from twisting in the clamp of a workstand due to the D-shape of the seatpost.…
It's often recommended to have a spare derailleur hanger for your bike, because if it breaks it can take weeks for you to get one. So, before mine broke I measured mine and modeled it in FreeCAD so I can get it machined if need be. I…
This model is designed for M3 screws and M3 inlets
Support imprimé en PA11 Carbon Adapté au cadre BMC SLR
The original design is based on a drawing presented on the MGAguru website. it is suggested that this too be made from a soft aluminum and as I don't have a lathe I wondered if a tool set made from PETG would do just as well. To get a…
TPU with 25% infill
Black TPU, 15% infill, supports.
This design allows an easy to use multi spool system similar to the ams lite, with a much smaller cost though. This BMCU/spool holder requires: 6x M3x35 screws 4x M3x10 screws 6x M3 nuts 2x M5x182 threaded rod 8x MR115 2RS ball bearings…
Support bridge for rear pannier rack of BMC 257 bicycle. Original pannier rack of this bicycle is supposed to handle 10kg load per side, but starts deforming already at lesser loads. This support braces the center of the pannier rack to…
this is a monitor mount for the raspberry pi for your Kodi box Category: 3D Printing
had a few extra screw holes free on my BMCU after mounting it to my A1 Mini, so thought I'd make a little Hydrometer holder. It uses two of the screws that come with the BMCU (M3x25mm IIRC), and should work with all the variants of the…
Update 11-02-2026. updated all the files! The BMC is now at a stage I consider production ready, so have a go, do some weird design stuff. 12-12-2025: So, first major update, the BMC is definitely usable, I'm running it in my Foamo…
Custom computer cycling base for the handle bar. Fits any brand like Garmin, Wahoo, Bryton, just need to print the correct bracket for you brand. You can use different gadgets on the bottom, like a camera, light, or whatever you want,…
Summary A fender mount for a BMC Alpenchallenge AMP E-Bike (model year around 2019), because the fender always hits the tire while riding. The parts are designed to fit on 46 mm wide Curana fenders attaching to the rack. If you just want…
Go pro mount for BMC SLR01 from 2020 (D shaped seat tube). Probably works with other BMCs. File is a bit sloppy but it worked well on my seatpost. Added a bit of duct tape around the seat tube so the clamping is better. Printed with 100%…
Small “cap” that ensures that front light of BMC 257 doesn't shine into your eyes while cycling. Front light is made by lighstskin, and neatly integrated into handlebar, but with the downside that is does shine into the eyes of the person…
I created this simple tag to better identify the color and the material of filament. You can rewrite text and change the color.
I printed it with Filaflex 60A TPU Filament, 100% infill. You might want to try a bit harder compound also. Lubricate well before installation with brake rubber grease or PTFE-lube. Remember, you need two of these. Have fun and gimme all…
ENGLISH : Creation of a screen cover for my CPAP machine BMC G3 A20, to hide the screen, the power button and the dial to reduce as much as possible the light emitted during the startup at night. The backing is glued with a double-sided…
KDxGP BMCC - A BMC Clone Check out my socials and other things at https://linktr.ee/KDxGP Like my creations? Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP. Thank you! Instructions On the top/lid there is no hole for…
had a few extra screw holes free on my BMCU after mounting it to my A1 Mini, so thought I'd make a little Hydrometer holder. It uses two of the screws that come with the BMCU (M3x25mm IIRC), and should work with all the variants of the…
Raspberry Pi 3A+ with BMC 64 IO hat case giving full access to all the ports of the Pi and the IO hat (two joystick ports and the 8 navigation buttons). Large Commodore logo on the bottom doubling as an air vent. Use Pan Head Self Tapping…
Raspberry Pi 2/3B+ with BMC 64 IO hat case giving full access to all the ports of the Pi and the IO hat (two joystick ports and the 8 navigation buttons). Large Commodore logo on the bottom doubling as an air vent. Use Pan Head Self…
