Counting matching models…
Dividers for the IKEA Boaxel wire baskets. The design has holes, so the dividers can be fixed in place with cable ties. Additionally the design comes with a sliding mechanism so that the individual halves can easily be printed on a Prusa…
Version for left, right and both sides.
I've lost one slider for the boaxel basket It feels that PETG works better, but PLA wasn't far off, print in 100% fill and full supports
It's S shaped, symmetric. Print on it's side, out of Prusa PETG, ~30% infill, works fine with very little stretching. The snap fit is really tight. See the drawing for dimensions. Source FreeCAD file included.
For me, tolerances were pretty good- needed a bit of force to fully seat. Dimensions: Wall→Tip: ~100mm “Trough” (flat part on top): ~55mm
Why this exists I’m using the IKEA BOAXEL system a lot in my office/workshop, and I ran into a very practical problem: adding more full-depth shelves to increase capacity quickly becomes impractical . BOAXEL “40 cm” shelves (actually ~ 38…
BOAXEL pants hanger fits almost perfectly IVAR racks. So I've made an adapter
Many existing models are too closed or have other problems. So I simply created my own parametric model in a few minutes in Onshape with a 50° transition angle between the mirror halves. For printing used Sunlu PETG, standard 0.4mm…
Print with supports, no brim needed. It will probably be printable without supports if rotated upside down (adding brim for adherence), but only requires a short tree support in this direction.
Boaxel wall distance blocks 3-20mm
You probably know the situation: you want to store something on an IKEA Boaxel shelf, but because of the wire design, the item won’t stand upright. This tray is designed to hold four standard soap dispensers.
Quick edit to use with 12mm thick by 40mm long board to fit the ikea boaxel.
Simple cup hanger for IKEA Boaxel. Perfect to hang cups between the shelves. Print Settings Printer Brand: Kingroon Printer: Kingroon KP3S Rafts: No Supports: Yes Resolution: 0.12 Infill: 35% Filament: Devil Design PLA White Category:…
You probably know the situation: you want to store something on an IKEA Boaxel shelf, but because of the wire design, the item won’t stand upright. This tray is designed to hold four standard soap dispensers.
Quick edit to use with 12mm thick by 40mm long board to fit the ikea boaxel.
Many existing models are too closed or have other problems. So I simply created my own parametric model in a few minutes in Onshape with a 50° transition angle between the mirror halves. For printing used Sunlu PETG, standard 0.4mm…
Wanted some half shelves for the same reasons as the original designer, the dimensions you need for these are 6" x 0.5" x (shelf length)"
Since I was installing two Skadis boards between the Boaxel rails, I wanted a connector to help me align them. You will need: Original mounting screws that come with your Skadis boards M4 locking nut matching each screw (original model…
IKEA Boaxel has holes in their brackets. IKEA sells a clothes rail, that can be mounted to those holes. But otherwise, there is no other use for those. So I decided to create a mount, that combines another IKEA system - SKADIS - with…
I needed a holder for my headphones compatible with BOAXEL system so here it is. Hope this helps someone! Pinted in PETG in horizontal orientation for added strength with a 0.4mm nozzle and 0.2mm layer height. Using tree supports on P1S.…
Made for power strip with 54mm x 42mm (width x height) and variable lenght. Its just to hold it in place… use double-faced adhesive tape to mount it to the mounts If you use SKADIS like i do, there are mounts with 10mm offset.
A mounting clip to secure IKEA SKADIS Pegboards onto the BOAXEL rails with a slot for inserting an M4 nut. The nut provides a stronger connection point and makes it so you can attach the brackets to the BOAXEL rails first and then put on…
Clips slip on. Made out of PLA, but any material will work. Left and Right versions are different (you can't download one and mirror it)
My wife decided that, for now, we’ll replace only one part of our old, bulky wardrobe with IKEA Boaxel. The old wardrobe has an ironing board attached to it, so some DIY work will be needed. I created a connector for an 18 mm board, which…
IT IS RECOMMENDED TO PRINT IT ON ITS SIDE WITH SUPPORTS (at least that worked for me) Onshape Link
This isn't a huge remix, but my boaxel rails were just slightly further apart than I'd need to use the originals. I lengthened the parts by 1mm so I could mix and match them with the original size to get things to fit. I hope this helps…
Just like the original model you need 3 cm x 6 cm signs and lay them onto the frame. Then press the base into it to construct a label. I myself printed it with PLA and added no supports. For the labels I just created a table in Word,…
Wanted some half shelves for the same reasons as the original designer, the dimensions you need for these are 6" x 0.5" x (shelf length)"
Made it to fit an IKEA BOAXEL Shelf. It holds your cable to the back of the shelf so it doesn't show underneath. Keeps it noice and toit. :) Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: No…
Sliding block base for IKEA BOAXEL wall rail for further use
Cable wall bracket for IKEA BOAXEL metal shelf. Print instructions Printer Brand: Prusa Printer: I3 MK3S+ Rafts: No Supports: No Resolution: 0.20 Infill: 15% Filament: Tested with PETG, PC Blend Carbon Fiber Black
I did not want to drill holes in my wall, so I decided to make an Ikea Boaxel mount to attach brooms on it. Printed with Artict White PLA. 100% infill. Broom hanger: https://www.printables.com/model/151859-broom-hanger-w-flexible-jaws
This allows attaching an aluminium profile to the Ikea BOAXEL shelving system, to allow hanging tools or containers near the wall. Extra material 40x10mm L-shape aluminium profile, 2mm thick. Length depends on you. M3x10 screws (2 per…
It holds your cable to the back of the shelf so it doesn't show underneath. The version from Miss-Art3mis works well, but I wanted something with a little more grip. This one snaps onto the bottom of the shelf. The SVG is included should…
Items needed: M5 (locking) nut - one for each mount Ikea Skadis: Original mounting screw Print settings that worked great for me: Layer height: 0.2 mm Infill (sparse infill density): 100% Wall loops: 4 Top/bottom shell layers: 5 Supports:…
I wanted to mount a Boaxel basket to this empty space in that modified cabinet. The basket is the perfect size but the structure around it was a bit too large. I therefore designed low profile slides that allow to hold the basket in…
