349 models
This is a remix of Crafty Sven's excellent articulated Guardian. Just like the original, it prints without supports. When I first printed the original model, I was honestly surprised that the head isn't designed to move - because most of…
I made a Remix of my Bokoblin BIG SIZE Chest. it has a lot of space !! look at my other Chest https://www.printables.com/de/model/402890-botw-bokoblin-chest-big-size-for-switch-games-and- - Infill 15% - Support yes
Remixed for easier printing. No supports needed. Prints well with both 0.4mm nozzle/0.2mm layers and 0.6mm nozzle/0.3mm layers. Looks especially snazzy in coextruded silk PLA.
This item is a low poly face mask perfect for masquerades or Halloween. It has an open mouth and holes for the nose so you can breathe ease, although you might sweat. There are slits on the sides for an elastic head strap. It's sized to…
This is a remix of aardimus' excellent Bokoblin Chest and 8u9o's SD Card Box . I merged the models and tweaked everything so they fit and work together nicely. After printing, thread a piece of wire through the hinges to make them work. I…
Shoe insoles incase yours arent cutting it, are damaged, or lack breathability etc.
This is a model of the Hylian Shield from The Legend of Zelda: Breath of the Wild made specifically for multi-extruder printers. Please be aware that the colourized version of this model was not designed to be printed in pieces on a…
Includes: Link (Not the archery pose, don’t have that one. Sorry!) Default Link (Unequipped) Zelda Ceremonial Zelda Mipha Daruk Revali Urbosa Sidon Yunobo Teba Riju Paya Purah Kass All with or without a platform! They’re definitely going…
Bokoblin are core enemies in the Zelda series and this is one of the best iterations yet. This time it is preparing to finally defeat Link with the help of a soup ladle and some mighty bananas. The Base is intended for printing on an FDM…
Supports required for both models. Glow PLA can be very cool for fire. Stands on its own. Scalable and fits on MINI. If you break some of the fireball removing supports IT'S OK you won't be able to tell. Dragon supports are not as hard to…
This is an MMU print of the treasure chest from Breath of the Wild. It's printed in several parts for the best quality but that does mean some assembly required. A little bit of super glue is all you need but most of the parts can just…
Read the full guide on: https://learn.adafruit.com/breath-of-the-wild-guardian-sword-led-3d-printed/ This is the Guardian Sword from Zelda, Breath of the Wild. It’s fully 3D Printed and has a ton of NeoPixel LEDs. This thing is super…
This is a wearable respirator that uses vacuum bag HEPA filters to protect from the spreading of viruses and bacteria. Have a look at the post printing section for more information. At 100% scale the mask is made for the average head…
Since the original assem,bly instructions for the panda breat tell you to raise the assembly off the ground and I did not want to clamp the assembly with too much force I have upgraded the original designe by adding supports. On the…
The license for this design is non-commercial, no one may sell any version of this design with the exception of Interlock Printing. https://etsy.me/3fWIY4w Printed in a Wood PLA, still working out some of the kinks in the printer settings…
The divine beasts from Zelda Breath of the Wild. This was one of the very first projects I got into on my 3D printing journey, so excuse the messy models.
This high-detail Guardian is ready to watch over your home. The three segments spin independently and are designed for a minimally supported print. There are three segments plus an additional alignment pin. The provided .3mf file has…
Lizalfos make up a core enemy in the Zelda series and this is one of the best iterations yet. I chose the BoTW version as I really liked the horn better. This stretchy lizard wields a dual pronged Lizal spear. The Base is intended for…
Inspired by topographic models of mountains I decided to create a topographic model of the Breath of The Wild map for my brother. I made this model in blender using a height map projected onto a plane before splitting it into six pieces…
I made a Remix of IXPatch Bokoblin Chest for my Switch Games or Blue-rays i added 2 options to print the Chest - 2 pieces bottom and top - 4 pieces 2 bottom parts and 2 top parts (cut in the middle) you also need 2x M6 x 60 screws and 2…
After printing this and contact the author, I still found the Zelda world map has some stitches, so created one from the height map data provided by this repo: https://github.com/MrCheeze/botw-tools/
The V30 is designed to need a lot less breath to be super loud. The tone is more precise, cleaner, but still easy to print. Be carefull, this whistle is really loud at low air flow! Links to the Thingiverse files: V29:…
Divine Beast Vah Rudania from the Legend of Zelda, Breath of the Wild. This stl model was created using Blender 4.0 using games assets published at: Wii U - The Legend of Zelda: Breath of the Wild - Divine Beast Vah Rudania - The Models…
Zelda breath of the wild Z logo with sword. It has some small loose pieces that I did not want to remove to respect the detail. They can be put in place with small tweezers. I printed it at a layer height of 0.1mm
Gas Can (Midwest) Nozzle / Spout with Breathing Tube This is my second Gas Can Spout design. The old design was straight with no breathing hole. This one pours way more easily + faster + smoother. That tube at the back is just a tube I…
This is oboka's design put through Meshmixer's "Make Solid" feature and Netfabb's "Repair" feature, which corrected a few flaws in the design that led to gaps in the entryway and on the side. Print Settings Rafts: Yes Supports: Yes…
I made this for my chronic rhinitis, I can now breathe well through my nose, and different models for different noses It takes some getting used to having it in your nose, I don't have now to use a medicinal nasal spray anymore This can…
Hi Folkard, Hopefully this is more to your satisfaction ; ) Cheers Jace
The forest dweller‘s sword! Some parts need supports and some do not, use your sense. I haven’t printed this yet, if you have any issues PLEASE tell me and I will help you. However, I can’t fix everything so please make sure you will be…
I recommend printing from PETG CF, better from PA CF. Attention - the upper elements must be compressed. The special feature of the mount is that you can quickly remove and put back the heater.
For those who suffer from anxiety or ADHD, a simple meditation aid could provide focus and calm. But, there are those selling $100 decorative straw, and that is just too much. Fortunately, Blender and 3D printing can come to the rescue!…
To connect the engine dehydrator to my Lycoming O-360 in a smooth way, I designed this simple adapter plug. The thread is a standard 1 1/8-12 UNF and the hole is dia 8 mm to provide a snug fit for a 6 mm plastic tube. It's tight enough as…
This model is compatible with the lego system.
Five keychains from The legend of Zelda Breath of the Wild/Tears of the Kingdom: Heart Container Stamina Vessel Daybreaker Shield Rupee Star Fragment You‘ll have to rotate and slice it yourself before printing. If you want me to upload…
This is a remix of IXPatch's excellent remix of Crafty Sven's excellent articulated guardian, with detachable arms.
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Needed a gas can nozzle for some old gas cans I had that didn't have nozzles. Found this one and remixed it by adding an elevated point to act as a zip tie stopper for use with the cap and a point of contact to provide some resting…
I wanted a corrupted Master sword from BOTW 2 and couldn't find one I liked so I used Rawolr's Master sword model from thingiverse as a base and sculpted the corrupted part. Once there are more pictures of the sword or the game comes out…
Ich habe die Handpose von Andrew Tate für einen Freund nachmodelliert.
This model is compatible with the lego system.
3d printable model gas mask. straps need to be attached for it to be used. Category: Costume
Horse or motorcycle? It's up to you to decide the best way to get around Hyrule. Motorcycles are pretty cool though. Figure is keyed to fit into the base. The Base is intended for printing on an FDM printer at .2 layer height or less for…
This is a remix that combines the features of the two remixes it's based on: Makes the head rotatable by hand Adds some structure so parts of the base don't detach so easily from the build plate I just merged things in Blender, credits go…
This is a single-piece plant pot for FDM printers, and it prints without supports. The wall is perforated to let as much air reach the roots as possible while still holding the soil in. A plain cup fused to the base catches drips and…
FOREWORD So, there should really be no need for this, but any time I speak with other Harley owners there happens to be someone falling from the tree and knowing nothing about this matter. To be compliant with anti-pollution regulation,…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The Guardian Turrets acted as watchmen in key locations during the great calamity. Though they are entirely immobile, the head extends out from the body when alerted. The head and extension are connected to the main body with two…
Custom lithophane stand included. Software used: Photoshop, Blender, Meshmixer, S3D. Dimensions: 171mm x 99mm x 6mm (6.75 x 3.88 x 0.24 inches) Print settings and information: https://www.gadunky.com/litho-print-settings/ Note: This is a…
side parts -Respirator - Breathing Mask With HEPA Filter
Breathable Desiccant Dry Box I am making a dry box to store and feed filament from into my printer and I could not find a box suitable to keep the desiccant in while it does its magic. I read you can make a suitable box by using a tight…
super fun to fidget with. best to put a layer of glue stick before you do it so it will not stick as much to the plate
A major trial of strength, or a source of neat ancient weapons. Either way, these mini guardians are nothing to joke about.
This nigh mare fuel monstrosity hails from Zelda Breath of the Wild. It used to be the big bad, but then got retconned into just another ganonblight. I printed it once long ago, but never got around to painting.
Air Latschen Pro – Breathable Slider Sandals V3 3D Printed Ultra Lightweight & Flexible Slider Shoes (Prototype) ⚠ Important Note: This is a prototype version . When printed, the shoes tend to come out slightly smaller than expected. For…
You may need to scale it up a lot so that the kit card isn't too fragile
This model is compatible with the lego system.
New Beveled Versions!! Zelda Breath of the Wild Rupee. I made this model in Blender. 1in/3in rupee.
A sword once wielded by a hero in an ancient age. When grasped, a strange sense of nostalgia washes over you. Take it when going alone would otherwise be dangerous. One of the item drops you get from the 8-bit Link Amiibo is an item just…
I didn't like the cable routing for the Panda Breath on my Snapmaker U1 so took the plunge and decided to drill a hole in the back window. Easily plugged if necessary. Use the drill guide (with the flat edge against the bottom outside…
An extremely rough logo of The Legend of Zelda: Breath of the Wild. I say rough because the mesh isn't perfect, but it will print on most printers given you are printing it at a sufficient size and quality to allow fine thin details to…
Here are the files for Frogs Breath jar, Because nothing is more suspicious than Frogs Breath. 😁 the lid of this model is designed to fit on a Candle Jar (a Wickford & Co candle to be precise ) The Lid Prints with a little support under…
Inspired by the Japanese meditation process, this device is similar to those found on Amazon, Etsy and more.
Some friends wanted a 3D printable Breath of the Wild dice rolling tower, so I threw this together. Should print in any common filament like PLA, PETG, Nylon etc. The files include full model as well as model parts incase you want to…
Thankyou to Murdoc for the original design! When using the original print, I ended up drilling a hole in the side at the level I wanted the water to reach (to allow a ‘breather’ hole so water will flow when it is below this point). I…
A rd40 compatible gas mask breath restrictor. With a twist, you can controll the breathing resistance. It is meant for training purposes. For the outer part, supports are recommended.
I modified the official Panda Breath mount STL ( available here ) for the Snapmaker U1 to add "feet" and magnet holes to mount the Panda Breath on the right wall of the Centauri Carbon 2, routing the power cable through a hole just behind…
This model is compatible with the lego system.
They fly now? They fly now. I hope you have some arrows or are adept with the shield parry. If you are sneaky you can one-shot them with an ancient arrow to the top eye symbol. Or just the regular eye. This model is nicely over-engineered…
This isn't a remix, more so a re-publish, but the author's original publishing was lacking the front grill piece. Luckily, there was a link to another site that contained the whole file as a .obj file. So I broke it up in Prusa Slicer and…
SGRT / 4D Test Phantom (Uses Varian Breathing Phantom) Video of Phantom in Action https://imgur.com/DTAPct6 You may find this useful for commissioning and training for the VisionRT or other SGRT systems. I've used it for testing beam…
Grade respira melhor para mascara fiber knit Grid breathe better for fiber knit mask Print instructions Print vertical without support
Read the full guide on: https://learn.adafruit.com/zelda-thunder-helm/overview 3D Print A Precious Heirloom from Zelda Breath of The Wild! The Thunder Helm is a unique piece of armor. It's described as a precious heirloom passed down…
NOTE: I bought another set for a family member, and found the cards were ever so slightly sized differently. I created a second design from scratch for the 1mm cards, and am much happier with the results. Painting on seams so they aren't…
A chin rest for Shrimp BOV to make diving more comfortable
This model is compatible with the lego system.
I made this coaster set for my kids in the living room. They love Zelda Breath of the Wild and it fits alot of our decor.
V2 Has been uploaded! After using this case on some recent travel, I decided to add a dip for grabbing the application magnet post and the strip as well. V1 will still remain, because people need choices. The travel case that Intake sells…
The source marked this model as adult content.
This is a hanging ornament based on the Sheikah symbol from The Legend of Zelda: Breath of the Wild . It's perfect for the rear-view mirror or Christmas tree. I have included the Fusion 360 source file used to create the ornament for…
很多花盆底部虽然有排水口，但边缘是平整无缺口，导致排水口被封在内部，排水慢，且不透气，所以我设计了这个花盆托盘，将花盆悬空托起3mm，给花盆底部提供快速排水和透气的空间，避免花盆底部潮湿。 Although there are drainage outlets at the bottom of many flowerpots, the edges are flat and without gaps, causing the drainage outlets to be…
The source marked this model as adult content.
It is a breathable box to store objects that need breathability. To store objects such as flowers, leaves, insects or products that have to dry. Double wave design provides great strength and stability. I have printed the model with PLA,…
Print them yourself or order from Shapeways. Ordering available for: - Scrubber Head Plug - Scrubber Bottom Plug - Head Cover - Head Protector The plugs will fit the loop / counterlung orifices on the scrubber bodies of the KISS…
This adapter can be used to connect a 3M filter to Decathlon Subea Easybreath snorkelling mask. Print instructions The print can be coated with XTC-3D which will make it 12-times more pressure tight. You will have to buy the 3M 6895…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Grade respira melhor para mascaras Grid breathe better for masks Print instructions Print vertical without support
This elegant bust captures the timeless serenity of a peacefully sleeping cat. With its smooth lines, single-color minimalist design, and calming presence, it brings warmth and natural charm to any space. Perfect as a desktop ornament,…
When you install the Panda Breath in the SnapMaker U1, the bracket prevents you from sliding the lid open for the filter housing, making changing filters more difficult than necessary. I removed the filter cover, and designed a…
Equipment that you can use to carry or store 3 liter tanks, 100mm wide. Same size what JJ ships with. Two parts design. If you only use it for storage, print just the base. If you use it for carrying, print both parts. Attach the handle…
This is a remix of the James Bond Breather from Thunderball (Sean Connery), found on thingiverse. While the original model uses printed air cans, I wanted to reuse 12g CO2 capsules. If you are looking for the 007 James Bond Breather from…
Just a mashup of an icon from Zelda Breath of the Wild.
Regulowany uchyt NERD 2 do Revo CCR.
Dick Tracy - Breathless Mahoney in High Collar Dress - 1990 3D printable model.
I remixed the logo from https://www.thingiverse.com/thing:2158638 in Tinkercad, so that the sword acts as a bookmark. I printed it with Silver PLA, 20% Infill, 0.2 resolution. Be careful with lifting the print from the printplate because…
The Adalinda Singing Serpent is about as famous as the classic Benchy. Now, with an oh-so-not-awkward-at-all hole in the bottom of her to fit a humidifier adaptor. the one that I needed is supplied, but just make your own to match the top…
Like Charlotte valve this design allow to connect Decathlon mask to respirators and alternatively two 22mm filters. Designed with the intention of creating a piece that is an excellent compromise for printing with less material, less…
terrestrial dragon, breathing fire
![Breathing Plant Pot [Fully Parametric]](https://media.printables.com/media/prints/24811407-cefd-4324-ad5c-f1fdb7392e32/images/14065725_564b601a-74fe-423d-bf2a-da15e99f3715_8c220627-3fbb-47bc-a1f0-3ca81b60bbad/img_0175.jpeg)
