158 models
This is a collapsing sword designed to be printed as one part. Its only 142mm high when printed but expands to over 860mm in total length! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…
This collapsing sword is designed to be printed as one part. The multi-part and the single-color replaceable blade versions are available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…
Introducing the Broadhead from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 40mm base. It is intended to be printed in one piece with the base attached for stability. All credit for character…
This collapsing sword is designed to be printed as one part. The multi-part and the single-color replaceable blade versions are available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…
I am still not able to print a working figure but I want to use this sword if I managed to have a sturdy Lucky 13. In the meantime I would like to share my design with you and would be happy if someone else could use it. If you post a…
My first sword for the LUCKY 13 from soozafon got some download’s and also likes. Thats so awesome and motivates me to design another weapon accessory for it. Here you got a easy print replica of the Dragon Slayer two handed broad sword…
This collapsing sword is designed to be printed as one part. The multi-part and the single-color replaceable blade versions are available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…
A tiny bit larger than the SKB case to improve the fit in the SKB bowcases. The original SKB box slides out pretty much every time, mine doesn't.
This is a 3 piece broadhead design. Apply super glue where necessary and assemble. Print instructions Layer Height: 0.15mm Infill: 15% Perimeters: 2 Brim: Yes, 2mm width Filament: PLA These setting work well for printing the model.
A remix of 3D Printing World 's Collapsing Broadsword except I removed the robot logo on the bottom of the broadsword.
This actually ended up really useful, if grass seed wasn't so expensive I'd be using it all the time because it really works well! Long story short, I needed to spread some grass seed so I designed and 3D printed one (well mostly printed,…
Some broadheads for arrows. The original typ is 8mm diameter and the shaft is 7mm. They actually work :D. Print instructions Used PLA and it works. You can use whatever you want
I remixed this to make it 15% larger to accomodate larger broadheads. It should still fit smaller heads too. I also adjusted the clips and hinge bars so they clip in and pivot better without falling out. 10% infill. No supports (used…
I’ve included two different models one that’s split in half (just print 2 and glue) and a whole one for SLA. I printed it at .15 layer hight and 4 perimeters to make sure it was strong enough.
An Improved Broadhead box. The lid is a friction fit so your tolerances need to be dialed in. DO NOT close the all the way when empty you will not be able to open it again. EDIT: I added 2 new lids v2 that have finger cutouts to make it…
mine have been made out of overture black super pla+, working like a charm ever since.
A no-nonsense broadhead wrench designed for bowhunters who want reliability and ease of use straight off the printer. This support-free design is optimized for 3-blade and 5-blade broadheads, but it’ll still get the job done on 2-blades…
UPDATE- I have included a reinforced version which should work better for those that don't have industrial filaments. 3D-printable replacement corner hub for the Broadstone Bromley Park Screen House . This part was recreated from…
Update! Through popular demand, I have made some slight modifications to the model to make it printable by X/P/A series of BambuLab printers, and have uploaded the corresponding 3mfs! You should print the original ones if you can, but if…
This is a snap-fit 2-part frame designed for hanging theater playbills. It is sized for NY Broadway playbills, taking into account small variations between the 9 I had on hand. I'm not sure if this size is common internationally, but…
The cards I purchased only came with the low profile brackets as standard so I designed these in Fusion 360 as replacements. These print laying flat and both the PCB mounts and the stiffening brace fold back into position after removal…
This is my first time ever to design a 3D Printed parts. Hope you'll like it
A wall mount for the Broadlink RM4 Pro but maybe it could work for the Mini version as it uses the same mounting pattern. Two versions, one with the Broadlink upside up and the upside down version. I honestly didn't tested this second one…
This is the broadsider from fallout 4. This is life size scale sorry for the size. This is one of the Props from the #games2life project for 2023. if you This model did not get completed so I am publishing it early. photos of the…
Since the HomeVacs nozzle is a bit small I created a larger adapter to more easily clean small dirt of tables, floors, carpets or sofas. The 3mf files contains support enforcers but after printing they were not very easily removable and I…
someone on FB asked for a broadsword for a gundam, so here it is, not tested but should work on SLA/DLP/MSLA printers. FDM will not work. Category: Model Robots
Works well in PLA at 20% infill, or 100% infill. Makes it extremely easy to install broadheads on any arrow. Rotate your broadhead within the wrench to find the appropriate slots.
Ripped straight from the fallout 4 game files 18k triangles 56k vertices
This model is compatible with the lego system.
The size can be adjusted with the parameters in fusion 360. Just measure the length and width of you hat's headband. After taking your hats measurements I recommend printing the size template in the downloads. Print this in vase mode for…
Used for sharpening removable blades on a broadhead. You will need to source a flat surface with a honing stone or wet-rub paper to do the job properly.
Just simple case for rpi zero, Sony IMX219 sensor and AR9271HP WiFi card. Category: R/C Vehicles
Simple Broadhead storage tubes. Standard broadheads thread into the lid via friction, there are no actual threads. When printing the six count box use two 3 count lids. I included single counts incase anyone wants to create their own…
The mount hole is for a #8 countersunk head. Mount it to tall wall first and slide the RM4 Mini in place.
I own several of these WiFi IR control hubs and have them spread throughout the house. I needed a way to wall mount them, yet still be able to see the indicator light if needed. Micro USB connector on one side (for power) and the…
I wanted to mount the Broadlink RM Mini 3 (IR blaster) that I use with Home Assistant as remote for tv and hi-fi, hidden away under a shelf, so I created this mount. Required screws: 1 x M2*8mm - to tighten the band holding the device 1 x…
I am sure the Magnus version works just fine but I couldn't find any in stock and decided to just make my own. I used a piece of scrap from a Goldtip Hunter shaft that measured 7.6-7.7mm in diameter and glued it in the end. That way it…
This is a duct and mount for a 120mm fan, to provide broad/gentle part cooling for the Seckit SK-Tank. The idea is that for certain parts, the regular part cooling fans can't cool some places sufficiently because the print head is moving…
A modified version of a PnP sword that went wrong. The original blade printed wrong and wouldn't extend. I loved the hilt so much I wanted to make my own blade that fit it. This is also my first attempt at post processing and painting. I…
This remix was largely inspired by Popandsicle's Master Sword , and it's Remix by KurtGamexp. I loved CarlThePumpkinMan's Model so much I just had to print it, but I wanted to make sure it wouldn't break while I was playing with it. I…
A low profile bracket to suite the Dell Broadcom 57711 10gb network card. Part numbers KJYD8 / 0KJYD8 Print with tree supports.
1:4 and 1:1 Scale Broad Billed Parrot sculpture. recommend printing it at a finer layer height or with a resin printer. The files are pretty large, they may take a while to load. The 1:8 scale model measure, around 4" long, The 1:1…
I made this sign for my Reddit Secret Santa giftee in 2018 since she was really into Broadway (shows). I don't know much about Broadway but I know they use marquee letters to advertise their shows! Video all about it:…
a sword created in similarities to a martial arts weapon using the power of six rings. must be increased in size!!
Adapted bracket make the broadcom 57810 to work in a Lenovo M920q. Keep in mind that other modifications needs to be done in order to make the card to work in that tiny pc like : -Buy the appropriate pci expansion card Pcie4 expansion…
My design of IKEA Skadis holder for BroadLink RM mini 3 IR gateway. Cable insert is on right back side. This item is inspired by IKEA SKADIS Collection by CSD_Salzburg, it uses the same hook system (I included the hook). Check out the…
Designed so all the pieces should fit together snuggly. May have to cut the blade into 2 unless you have a big printer. :)
It would be great if I can mount the Broadlink RM4 Mini to the USB charger and let it hang from the wall socket. That's what led me to design this attachment. The slot for the USB charger measures 49 x 27.5mm (internally) and it should…
This is a simple rack design used to hold a Viking-design broadsword (mine is from Kult of Athena, for those curious) horizontally on your wall. You'll need 2x and space them out to balance as needed. The support nook for the scabbard and…
This is my take on a Broadlink holder. I knocked it up, very quickly, this morning, after my previous holder (by MNGNZ - thing: 2243225) broke. It was the third copy of his design that I'd printed, and they all broke in the same place. So…
This attachment is for securing the Broadlink HTS2 temperature and humidity sensor to the Broadlink RM4 Mini. It allows the sensor to be “floating” in the air above/ around the RM4 Mini instead of resting on surfaces, allowing it to…
If your slicer says it needs supports, it needs supports (none of the parts seem to be borderline need/dont need) 2x Crossgaurd, and both types of crossgaurd pins, the rest 1x. Assembly is fairly simple with a picture of the sword online,…
A new sword model for the Dummy 13 to wield. Easy to print, easy to attach. If you would like to support me - you can buy me a coffee :) Please try to share photo of your print <3 Check out my other models HERE Any feedback will be highly…
This is a custom wall mount for the Broadlink RM Mini. There are no screw holes since the idea is to use double sided tape. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,28 Infill: 15…
All the other tree-shaped cookie cutters are christmas trees (or conifers in general). So I made this model of broad-leaved tree to complement all the stereotypical cookies. About 8cm (~3in) in height, which makes the trunk about 0.8cm…
Very slight modification to the original broadhead wrench. Added chamfers so the wrench can be printed front side down. This model may be easier to print in this orientation for certain printers. I believe the original model was meant to…
Ratrig Wire Guide with a thinner base and closed mounting holes. Added some longer and shorter ones.
Hi all, Very simple model, but it will be very useful to people who have bought old broadcast lenses that are missing their zoom stick. Or have lost their zoom stick on a modern lens. Zoom sticks are pretty hard to buy as spare parts. The…
This is a latching box for storing three Ravin R101 Broadheads . It prints in one piece, without supports. I added a bit of foam to make it silent and to hold the broadheads in place. It probably works for aluminum (R102) and titanium…
Some bow travel cases don't have plastic injected holes for screws which I recommend as the best way to add this mini box. If the orientation is not lining up horizontally or vertically so that the screw holes don't match up on the lid of…
The model consists of 8 parts 3d printed, and one metal tube, I used a basic conduit tube you can find in home depo. The diameter of the tube is 18mm or 0.7 inch. The tube is 22.8 inches long. The sword itself is 35 inches long
Flat on the back for easy, no-support printing. Fancy on the front for comfortable gripping.
Parts for replicating the Broadway version of Willy Wonka's cane, as used in 2017. The models are not a 100% accurate. Use a 8mm metal tube (Aluminium) for the inside, tap both ends of the tube for M6x50mm set screws. Use Loctite thread…
Broadcom 9500-8i or 9500-16i HBA Fan Bracket for low profile PCIe slot.
Royal broadsword I made because I wanted to try and make a bigger sword that hopefully didn't need much post-work. Unfortunately it seems that I was wrong and the welding was more visible then I had hoped. But of course one could print it…
Print with 25% or more infill to ensure that there is infill in the 'arms'. In testing, depending on print direction, I had issues with the thinner arms. I added a second model with reinforcements around that section. Best stability…
Clip for use on a "Rage" type broadhead Demo here: https://youtu.be/v_DGXT3TEos Category: Sport & Outdoors
a pristine royal broadsword from ToTK
My wife wanted a version with a broader opening for more flowers to put in. Top facettes cut off an scaled up to 120% (in contrast to the original model) I printed with 5 bottom perimeters and 3 wall perimeters in about 6:20 hours.…
This model is a remix adapted specifically for Pilot Board Master liquid whiteboard markers (M size). The original design was intended for Pentel Maxiflo markers. This version has been redesigned to match the cap taper and diameter of the…
Tree ornament I made for a cousin who has aspirations for broadway. I uploaded a blank version and it can either be changed via step file or simply add a negative text space in your slicer to add the name. be sure in the preview that your…
BroadLink RM3 mount using a small poster Command Strip around the USB cable. Not recommended for applications where USB connection will be stressed. Opening in mount sized for the original RM3 USB cable (7mm x 10mm), may work for others…
Please see Wheim's original model for a detailed description of the model and its design: https://www.printables.com/model/432213-drinkmate-bottle-dryer-and-wall-storage-solution Also note that this remix is intended to be affixed to the…
A small frame for a loop antenna made from RG8 coax. Based on this video's dimensions https://www.youtube.com/watch?v=Ivr9VbSgjUU , just with BNC connectors. The frame is to support it since RG8 is quite thin and flimsy. The loop is…
Low profile adapter NIC.
This model can be printed with the largest side facing down, or if space is tight on the print bed, it can be printed with the HSW peg at the top, without requiring supports on most modern printers. Note: The photos were taken of a (now…
Added the ability to grab the broadhead base by the bottom by using thumb and index finger, or by using pliers or other tools. You can also push the base down through two holes in the lid. The original creator mentioned a possible issue…
Print Settings: Printer brand: Anycubic Printer: i3 Mega S/Pro Rafts: No Supports: No Resolution: 1.8 Infill: 25% Filament brand: Hatchbox Filament color: Red Filament material: PETG
Print with 0.8mm nozzle for precise details. Achieve seamless curves in vase mode. Speed: 10mm/s for delicate layering. Elevate your space with this innovation.
Clamp Holder for broader Claws from https://www.printables.com/model/991382-claw-collection-for-print-in-place-clamp Sizes for 4, 6, 8 and 10 Clamps, also a bigger holder for 8 small (100%) 4 medium size (150%) and 4 (200%) clamps
A set of files to adapt broadcast lenses of 48mm, 38mm, and 35.74mm flange distances to Sony E-mount cameras. Video: https://youtu.be/gs_-Hb7HiKc 4 parts required to build an adapter: "BAYONET", "BAYONETBACK", "EMOUNT", "BARREL" Parts…
I needed a wrench to tighten the broadheads on my arrows. I created this and printed it in ABS with a 25% infill. I used a brim and had no issues. This updated version will fit both fixed blade and mechanical. Printer: Core One Filament:…
Mountain Topography of a Himalayan Mountain Range - K2, Broad Peak, Gasherbrum V
I printed this with PLA, flat side of the bracket down on the printer plate. The locking mount feature of the RM4 pro already had a good fit from the original 3D file. Two screw holes provided.
I'm using my RM4 Mini to control a humidifier, but the IR command that turns it on also turns on another a device that's within range. To solve the problem, I designed a cover that limits the field of view and only allows the RM4 Mini to…
The charger used is a MST3K-EU AC Adapter. No assembly required. If you want the cable to face the opposite direction just mirror the part in the x axis.
Here's a single-piece design rack to hang a broadsword vertically on your wall. I used two screws to hang mine and it holds up well as my sword is a well-made, lightweight build. Please check out the dimensions and compare to what you may…
Scale to fit whatever size you're looking for. Recommend setting color changes at text start, text end, and ‘lights’ start.
Just glue these two inserts into a cut off arrow shaft to make a handy broadhead sharpening tool. Currently sized to fit a 2219 shaft. More sizes to come Insert is not threaded. you can thread a head into it, but it is friction fit. Print…
This is a snap-fit 2-part frame designed for hanging theater playbills. It is sized for NY Broadway playbills, taking into account small variations. The backplate is designed and tested to snap fit into the frame without any scale…
This is a mount to allow you to atatch a Sony DXF-50 or other similar vintage broadcast camera to anywhere you wish. I chose to mount my DXF-50 to my workbench. Keep in mind that you can power these with an Averkey VGA-to-NTSC converter,…
We are planning a broadway-themed event for our daughter and my wife and I have been working on centerpiece ideas. After a lot of experimentation I have this design to share. It's a box with spaces to put a theater playbill cover,…
Remix of Wedgewood's (https://www.printables.com/model/617995-stand-for-milk-aerator-that-little-battery-powered) original design which adds a broader base. When glued together - the pair work together well for more stability when holding…
Support for inserting a 10x2 magnet into the base of the Broadlink RM4 Mini. The hole is narrow enough to be inserted by simply pressing it in, but adding a drop of glue is recommended printed in filoalfa petg with 4 walls
I use this simple bracket to mount my Broadlink RM3 behind my TV. My wall bracket has a nice nook where I can just slide in from the side and it holds it securely. The bracket will hold it upside down (by the USB connector) or right-side…
Print on their side like the clips in the original model.
A broader built version of the original. Its a bit more sturdy and doesn't tilt over sideways as easily. Good for putting a phone sideways.
