Counting matching models…
Bottom cap for any Zenza Bronica GS-1 viewfinder, including the GS-1 Prism AE Finder, and the GS-1 Rotating Prism AE Finder. Originally I made this to be printed with TPU, for flexibility, and it certainly works, but it's not very…
Maybe print at a larger size, depending on your tolerances. I printed mine at 104%.
Rear lens cap for Bronica S lens units. Modeled from measured dimensions of original, not print tested.
I've loved shooting my Bronica with a 6x4.5 back but found composing in square and mentally cutting out the cropped imagI've loved shooting my Bronica with a 6x4.5 back but found composing in square and mentally cutting out the cropped…
TPU leatherette for the Zenza Bronica S2A. (S2 should also work) By printing TPU on a PEI Print plate, the surface finish and feel is quite close to a of the shelf leatherette. After printing the parts can be glued onto the Body. Some…
For the Bronica GS-1 6x7 Camera - all viewfinders. This mask allows you to have a guide for shooting 6x6, whether you're using a 6x7 or 6x6 film back. I used clear PLA, but any color/material could be used. CAREFULLY set it on top of your…
This project is very DIY, contains little to no documentation whatsoever, and was done over one drunk weekend. As such don't expect 0 cludge factor until I have had some time to revisit this with some sense of sobriety. Cut everything out…
This model is a based on my last model https://www.printables.com/model/1627309-zenze-bronica-etrs-etrsi-base Please be aware the fit for dark slide is VERY TIGHT, please use the provided onshape or step file to adjust the gap for snug…
Replacement winding lever for Bronica ETR Cameras. Uses a M2 Socket head and nut.
Have you ever wanted to mount a compact meter on the side of your Bronica? Now you can! The D/S/S2/S2a/C series cameras have a bayonet on the side which can be used to connect all sort of accessories. This adapter will allow you to mount…
I lost the cover for the flash socket on my Bronica ETRSi, hence the need for this.
I recently bought a used Bronica SQ-Ai medium format camera, and the first time I tried to use the multiple-exposure lever (which, aside from its obvious application, is needed to trip the shutter when you don't have film loaded), it fell…
Broke mine so I made a new one.
Here are a few adapters I made a while back to adapt Agfa Staeble made Repro lenses to M57 mount on the Bronica S2/S2A. These lenses comes under a few brands such as Ultragons, Repromaster, Intergon etc. From what I understand they are…
Inspired by the classic Rapid Rectilinear design, this build utilizes a pair of 200mm (52mm diameter) achromatic lenses sourced from AliExpress (€22 for the set, shipping included).
Replacement winding lever for Bronica ETR Cameras. Uses a M2 Socket head and nut.
The knob comes with two design, v1.x being big knob that cover the whole thing where v2.x is a small T shape knob that keep the size smaller but strength could be a concern depend on your application. Model was design on OnShape:…
It's the base for Zenza bronica ETRS / ETRSi (idk if ETR works) with two C shape clip to grip on the camera. The base cover the metal bottom plate, some holes for speed grip and battery compartment. Should work without using the heat…
Still a W.I.P. This adapter helps you mount your Bronica SQ-A prism finder onto your Mamiya RB67. You will need to dissasemble your RB67 chimney finder to get the base + two front screws. Once you have those, and have printed this, you…
remixed to better fit etr series (etr - etrs -etrsi) a touch smaller in y and z axis depending on printer tolerances you might want to try a few % over or under battery cover for the zenza bronica etr/etrs/etrsi series of 120 medium…
This is a lens cap derived from original design. Intended for printing with multimaterial supports, but you can probably manage with bridges and some good luck. Warning: very, very tight tolerances. You will have to adjust XY comp with…
The knob comes with two design, v1.x being big knob that cover the whole thing where v2.x is a small T shape knob that keep the size smaller but strength could be a concern depend on your application. Model was design on OnShape:…
It's the base for Zenza bronica ETRS / ETRSi (idk if ETR works) with two C shape clip to grip on the camera. The base cover the metal bottom plate, some holes for speed grip and battery compartment. Should work without using the heat…
Replacement for the wheel on Bronica ETRS film backs, keep in mind this is made with fairly tight tolerances that work for my printer and that this requires a left hand threaded M1.5 screw.
