1 / 2
Bronica GS (PG) lens cap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lens cap for Bronica GS lenses
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 25
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a lens cap derived from original design. Intended for printing with multimaterial supports, but you can probably manage with bridges and some good luck.
Warning: very, very tight tolerances. You will have to adjust XY comp with trial and error.
upd 1.1: slightly increased tolerances. they are still tight.