65 models
A quick and dirty remix of @bnn_229452 's 6x9 negative carrier for a Beseler 23cii Enlarger
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for one variant
I took my original desinged but remodelled it to you can change the colour of the text to your desired colours. I printed mine on the Bambu P1s using the AMS unit in black and yellow but you can choose any colour filament. printed in PLA…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for PETGSource material: PET
Pentax 67 6x7 67ii Left hand grip
A simple yet effective lens cap for all pentax 67 lenses! easy to print, nice and simple and quick. Even has pentax 67 written on the bottom of it. (if you forget what lenses its for) PLA but will work with any fillement 15 percent infill…
Grip for Pentax 6x7. Made for my big hands and the index finger on the trigger. You need a 20mm M3 screw. Printed in Atomic filament CF-PETG. Version 2 has more space between grip and camera.
I ony had one of these, but needed another two when my second Pentax 67 body failed and I decided to sell off my prisms. This is needed to protect the prism's exposed glass on the bottom when not on the camera. Can be printed in your…
It is a copy of a double-ended wrench organizer (6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22mm). I replaced the original organizer of the combination wrench set with this one for the set of double-ended wrenches. This other organizer…
Needed end caps for my LED Channels and so here we are. Can't find any other info on the channels other than the size of 16x7mm as indicated by the picture. Included is a cap with a hole for a cable and a cap without a hole.
A wavy tray that looks like a seashell, a Version with a Flat Base a Version with a curved Base Dimension: Ø16 cm h 7 cm Supports Needed
A simple K-cup dispenser with a larger capacity. (42) Prints as two pieces. Recommend some supports. Note: I had to push the two pieces together with a fair amount of force when I printed mine so minor adjustments to the pegs/holes may be…
About: So I printed Miniature Vise 2.0 (much easier to assemble and 100% printable) and noticed I do not have a bolt for it. Yet the Miniature Vice 2.0 => 100% printed, no metal parts required contains the bolt but it has different head…
just another skadis gadget
Horseman 6x7 back to ALPA conversion hotfix251122 add a model with spacer
Adapter for mounting Pentax 6x7 lenses on Canon EF mount DSLRs. Locks the camera and the lens in position. Line the red dot on the lens with the small dot on the mount and turn to the larger dot until it locks. 1x 25mm M3 screw and nut…
This is in Alpha and while it does seem to work for me, it's maybe not perfected yet. You are welcome to try it! Note the f3d file if you want to change sizes for other films like 110 or whatever you want.
21 May 2026 Update Fixed the clearances in the back mount — Pro SD backs now attach without any issues Removed the protruding “tooth” at the bottom of the mount that prevented early RB67 Pro backs from fitting properly Added a body…
Designed in Creo, Measurements taken from camera The Design is symmetrical, so you can flip it. If there should be any issues, message me and I can modify it. Used to change shutter speeds easier on a Pentax 6x7 and 67. This thing gets…
Add holes for 6x74mm to the already existing 6x70mm holes on the Moza Quick Release.
Cover for Pentax 6x7 prisms. Printed in Atomic filament PETG.
This is a surprise birthday gift for my sister. I bet she will love it. I have included stl and skp files so you can modify this to your own size and shape if you like. I use sketchup, because it is really easy. You can put any type of…
This is a Picatinny Style Rail, mounted on the Pentax 6x7. Out there are already plenty of accerories for this mount like cold shoes, grips and gopro holders. With this rail, which easily slides on, you can add needed features to your…
6x7 variant of my previous film scanning holder remixed from rodsgear's original design. Intended to serve as a full replacement to the 6x4.5 version (if you're scanning multiple 120 frame sizes). Details are basically the same as the…
This is a cover for the top focusing screen of the Pentax 6x7, it just needs at least 2 small magnets (6,5mm x 2,5mm) to hold on properly. (You can insert more to make it adhere more strongly) There are 3 versions, depending on your exact…
I modified the 6.9 carrier that 'bnn' made and changed it to 6x7. Actual opening is 55x68mm. I am happy to generate other size negative holders. I did not adjust the pins for the negative holder in the first version. V2 solves this. I…
Spacer with 6x70mm bolt pattern. Outer ⌀80mm Inner ⌀60mm Thickness 15mm Bolt holes ⌀5mm
LEGO DUPLO-compatible Door 6x7 Inspired by Design ID: 79789 Designed to go with LEGO DUPLO Cavity Brick 1x2x2 Printing information The STL file is correctly aligned. Layer height: 0.2 mm Perimeter: 2 Infill: 10 % Support: no I am looking…
This is a model of the Omega Enlarger 6x7 mixing box. The original part is flimsy, and hard to find used. The model and dimensions were taken from a scan of the stock styrofoam box. The model can be used to print your own, or as a…
Self standing photo frame, vertical or horizontal. Easy to print without supports. Material PLA or PETG.
Bayonet style lens hood for Pentax 6x7 90mm or 105mm lenses. Should work with longer Pentax lenses with 67mm diameter filter size. With 100% scale it may be a bit too tight. I printed it 99.77% scaling and it worked out great.
If you need a lens cap to go on the front of your Takumar 75mm F/4.5 then this fits perfectly and tight. I designed to be simple and easy to print too. It fits tightly on the front but you can still take it off without too much pressure.…
To install it you need: 2x Screw (comes with the original base) 6x M5 Screw 6x M5 Nut Instructions: Insert six M5 Nuts in the needed holes Attach the Adapter to the wheelbase Secure the Adapter using the two Screws Use six M5 Screws To…
Shutter speed ring in order to easily set shutter speed on your Pentax 6x7.
For use with the Omega Superchromega C760, normally it only comes with the 35mm light mixing box, this enables you to do medium format films. I modified the original one so it saves print time and material. The model might look weird in…
Hello! I've done this on my thrustmaster T500RS, but it should fit all the “lower cost” thrustmaster wheelbase such as T300 and others. Either minor or major disassembly is required depending on your goal. In both cases it is needed to…
Simple holder LED remote controls with a width of 40x86x7mm. I recommend using PLA filaments and setting the print to 0.2mm layer hight. It is recommended to attach the holder to the wall or furniture with double-sided adhesive tape.
This is a ground glass mask for 4x5 to 6x7 to use with 120 roll film back. This model might need to be adjusted slightly to fit your ground glass. I've had to take it down to .75mm on some cameras to get it to fit under a view finder hood…
De Vere 6x7 negative holder The length is not standard so I made holder for all the sizes I could find. Category: Other
Pentax Asahi logo replacement for Pentax 67 or 6x7. I've printed using 0,2 nozzle, but 0.4 should works as well. I've used AMS to use 2 colors.
This is to use for the Viewing the Rock World slide viewer by Matthew Tarling: https://matthewtarling.github.io/outreach/ Not exactly a remix in itself, this takes the inspiration from Matthew and completely reimagines how to hold a…
@norbimakes3d created a redesign of the MK3S+ extruder assembly to more reliably detect filament with an MMU3. I Couldn't source the same threaded insert they designed the chimney base for, so I modified that part to use the threaded…
Convert your standard VALOI easy120 6x9 film holder into a versatile multi-format system! These drop-in masks allow you to seamlessly shoot and scan 6x7 and 6x4.5 medium format film without buying entirely separate holders. They are…
Adapter for mounting a steering wheel with a 6x70 mm bolt pattern (Sparco, Momo, etc.) to an IKEA Skandis. Use M5 insert nuts for mounting and the original steering wheel bolts.
Bayonet style lens hood for Pentax 6x7 55mm F3.5, this lens have 100mm filter size. *From the sample picture, the finished print have different parts (hood and mount) this was my prototype. The final model have combine the part together.
Super einfacher und normaler Schriftzug als 3D in der Größe ca. 296x70x2 mm. drucken, doppelseitiges Klebeband…ab an die Wand oder ähnliches, fertig ist! Weiß nicht wie es euch geht, aber…Einfaches ist in vielen Sachen auch schön;) Viel…
I have used this adapter in order to mount wheel with bolt pattern 6x74mm to Fanatec podium hub which has bolt pattern 6x70. Print settings: 4 wall 5 bottom and top layers 40% infill PLA You will also need M5 rutex inserts (Nardi to…
Bayonets style lens cap for Pentax 6x7 55mm F3.5 Not a perfect fit but usable. Can adjust scaling as needed.
Simple adapter that converts and offsets by 30 deg a 74mm PCD wheel to a 70mm quick release
Keeps things clean and tidy. Inner storage space is 20 x 7 cm. For the print core storage boxes, please follow this link: https://www.printables.com/model/936474-ultimaker-s7-print-core-storage-tray
I had a steering wheel from a 3rd generation Ford Expedition laying around, and one thing led to another, and the result was me making this model. This will work for similar Ford/Linclon steering wheels found on the F150 and Superduty…
Adapter for mounting a steering wheel with a 6x70 mm bolt pattern (Sparco, Momo, etc.) to an IKEA Skandis. Use M5 insert nuts for mounting and the original steering wheel bolts.
I have used this adapter in order to mount wheel with bolt pattern 6x74mm to Fanatec podium hub which has bolt pattern 6x70. Print settings: 4 wall 5 bottom and top layers 40% infill PLA You will also need M5 rutex inserts (Nardi to…
6x7 variant of my previous film scanning holder remixed from rodsgear's original design. Intended to serve as a full replacement to the 6x4.5 version (if you're scanning multiple 120 frame sizes). Details are basically the same as the…
Bayonet style lens hood for Pentax 6x7 90mm or 105mm lenses. Should work with longer Pentax lenses with 67mm diameter filter size. With 100% scale it may be a bit too tight. I printed it 99.77% scaling and it worked out great.
Bayonet style lens hood for Pentax 6x7 55mm F3.5, this lens have 100mm filter size. *From the sample picture, the finished print have different parts (hood and mount) this was my prototype. The final model have combine the part together.
About: So I printed Miniature Vise 2.0 (much easier to assemble and 100% printable) and noticed I do not have a bolt for it. Yet the Miniature Vice 2.0 => 100% printed, no metal parts required contains the bolt but it has different head…
Hello! I've done this on my thrustmaster T500RS, but it should fit all the “lower cost” thrustmaster wheelbase such as T300 and others. Either minor or major disassembly is required depending on your goal. In both cases it is needed to…
Diese Variante wurde auf Anfrage eines Nutzers aus 2 bereits veröffentlichten Platten zusammengesetzt. Es wird empfohlen, zu einer besseren Festigkeit PETG-Filament und einem Infill von 30%-50% zu drucken. Damit hat man die Möglichkeit,…
I have adapted the well made logo to my Pentax model: Added border and made "Asahi" a little bigger. Post-Printing white Letters To make the lettering white, I printed the plate with white PLA, then sprayed it black. After the paint was…
Print with support and 100% infill for extra strength. Use gently. Use at your own risk.
Follow the same instructions from https://www.printables.com/es/@BC76, work pretty well. Thanks. I used 0.20 layer height @ 50% infil with PLA+ 4 walls 4 top and bottom layers With supports (below)
Bonsai training pot (02) round 146x146x70mm, you can use it as a training-pot for your tiny Bonsai or as a flowerpot.
This is a simple holder for Post-It Notes (note size 76x76mm; a 50mm high block fits nicely in the holder). Two designs are provided: with/without pen holder Design: Tinkercad. Slicing/printing: Prusaslicer 2.7.4 and Prusa MK4, fw 6.0.2;…
Model of the .338 Lapua Magnum cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be…
