Counting matching models…
Classic ship-wreck for sinking into your fish tank. Includes air hose connector to give the benchy some bubblin action. Plates added to let you weight down stubborn parts with fish tank gravel. To print - recommend making them not float -…
Print approx. €2.36–€2.89 excl. taxPreliminary estimate for PETGSource material: PET
My friend upgraded her hermit crab enclosure so I upgraded my original pool model with a bubbler attachment. I still no nothing about hermit crabs so let me know if theres a way to improve it!
This airstone is easily printable and can be adjusted to your needs Printing: In order to be safe in your fishtank, i recommend using PLA. Print all parts in the given orientation. No support needed. Layer hight of 0.2 (or finer)…
Air injector to add air to fertilizer supply tank for hydroponics Video link https://youtu.be/dntHLFqrS6Q Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament:…
3d benchy turned into an aquarium bubbler printed hollow then drained so that it sinks Category: Pets
This is a simple "bubbler" style dual-chamber airlock for home brewing. Note: still having trouble with getting prints to reliably hold liquid. I'm pretty sure it'll work if I print in PETG, but with PLA it's giving me trouble. Update…
a wind powered bubble machine. for table or bike. or moped?. or car? Category: Mechanical Toys
A friend of mine needed a hermit crab pool, so I designed this. In order to make it water tight I would suggest using PETG with a wall width of 1.4mm. Try to make your layer levels as thick as you can. This will give water less spots to…
In case your bubble stone is damaged and you need a quick replacement I've made this one. It's designed to fit onto standard air tubing but I provide also original OpenSCAD file so you can modify it to your needs. Modifications allow…
Designed to fit a 40mm diameter air stone to fancy up your aquarium.
Problem: BMB Universal lid pops off. I like Northern Brewer's Big Mouth Bubbler but they got rid of the screw-on lid, and replaced it with a press-on cap that pops off unless the lid and bottle are super dry, and even then it can pop-off.…
This Coral is a perfect Decor for your Aquarium. Place a bubbler under it to create the perfect mix of Voronoi and Fishy FUN! Original is made by @FernandoJerez
MOUTHPIECE: threads on to any standard pop bottle (0.13 ISO Standard Thread Pitch). The adapter houses a 14mm bong downstem into { insert pop bottle – glass bottle }. This allows for the bowl to be in contact with the downstem rather than…
This is based from one of my earliest models, when I first got into printing; I've fixed it up a lot. I am now refining it, final version coming soon. Almost no need for supports at this point, except for the upper teeth, which I will fix…
this wind bubbler has the wands incorporated into the fan blades. size is approx 162mm which is a lil over 6 inches. i added a bubble solution auto filler adapter to help keep solution reservoir filled via a soda bottle that screws into…
These canning headspace / debubbler come with two steps, one at 10mm and the second at 20. Two different provided lengths 150 and 200 for larger cans / jars.
My friend got a bubbler but it had no holder, it was made from a 25mm test tube so I modeled it to hold that. This pic is of the draft version with fine settings it's even nicer. A little bit of cleanup is needed for the supports but…
Ideal sprinkler attachment for your garden hose to gently watering a vegetable garden, flower beds or dry spots in your lawn. The water quickly absorbs into the ground, protecting your plants and the dirt around them without disturbing…
I used my debubbler to unstick some meat in my grinder and needed a new one afterwards so I just designed one in Tinkercad.
if using this for consumption understand all risks involved with materials cleaning storage etc… I imagine you already know what this is or how it can be used but here's some I think useful information. 10.4mm input at the bottom. the…
*!Bitte informieren Sie sich über Gesundheitliche Risiken!* Ich selbst habe dies in PETG gedruckt. >>>>Benutzt am besten langes Chillum (Glas) der den Diffusor dann ersetzt<<<<<< Ein zerbrochenes chillum (Schliff 12,5mm) kann so nun auch…
wind bubbler 4.2 FAN with enhanced center 5.5mm hole for M5 screws Category: Mechanical Toys
Turn any standard mason jar into a bubbler for a quick and easy airlock for fermenters. To be used with 5/8 OD tubing. Printed with PLA at 0.3mm layer height. Cheers!
This is a kickstand for the airmax bubbler attachment so it does not fall over. I printed it upside down with no issues
This is my first 3D- Modell. It is working but could need some changes to work perfectly. i would recomand some tape to seal it better.
Put this in a fish tank with an air tube and watch it blow bubbles out of the nose. Base used to help keep it buried in rock/sand. Two different sizes; small and big, but both use the same sized tubing. Air tube used is 5.5mm wide.
Dobrý den, navrhnul jsem 3D řešení bubbleru pro vodní dýmku Steamulation Prime Pro X Black Matt, který má funguje stejně, jako od výrobce https://shisha-steamulation.de/en/product/the-steamulation-classic-diffusor/ .
Generic Stand for a Lot of bubblers. Tested with a Venty, surely fits a lot more. PETG/ABS/ASA/PLA Infill 15-100 Brim: No Supports: No
I like to brew my own non-gaseous drinks, specifically mead. This generates a LOT of CO2 gases, and you can't let it ferment to open-air either. This is where you need a bubbler to act as a gaseous valve. In this particular instance, just…
I really liked the box from @ROLS733, but also wanted a space for the Wolkenkraft Bubbler and Bong adapter.
I'm new to this hobby, and it was interesting to see the community implode just as I was getting my feet wet. When Benchy's owners apparently chose to sink to a new low and shipwreck a classic test model, it felt like a breach of trust –…
Designed to replace the lid that seals the jar ( NOT THE THREADED LID PART ) the threaded lid section then gets put over the mouthpiece and twisted on the jar. (Smallmouth) From the orientation it arrives in your slicer, I recommend…
If you need to scale up to 111% (x & y axis) for the glass siphonless big mouth bubbler, this design will work for smaller print surfaces that don't allow the collar to be printed in a single piece. This separates the collar into 3 pieces…
Printed with TPU, works really great. PLA should work without problems but you might have to play around with the scale to get a tight enough fit. Get in contact for a Commercial License if you want to sell these. Please respect the work…
A stand to keep your Sneaky Pete vaporizer bubbler from tipping over when not in use. One labeled “Tall” is just slightly Taller then the other for more stability. if you want a tighter fit use provided G-code is already scaled or scale X…
A simple Bubble vase that is 100MM tall Scale to your liking
My newest project! A 4 chambered percolator that fits 14mm glass pieces.
Anti-slip mat for a cactus dry bubbler
This is a mold to cast a adapter for the Storz & Bickel Might+ and Crafty+ vaporizer to combine it with a bubbler that has a 16mm glass tube. This Adapter MUST be casted from high temperature two component silicone! Don't use standard 2k…
Cap for a pool bubbler. Print with a strong material because at some point you will want to remove it, and although the model provides tabs to aid in removal, you don't want this to deteriorate too much from the pool chemicals, sun…
Can be used as a bath toy. OpenScad file included. You can adjust bubles size, and bubbling speed by changing top, and bottom holes diameters. bulbulator, bullbulator, bullbullator boolbullator, bubbler, bubbling device
I had an old icebox. It was in good condition, but I lost the drain cap. And the cap that connects to the air bubbler I was using for fishing was broken. I made new caps to replace them. My icebox is the same brand as this one and I think…
This is a cool little tool for infusing your whiskey, bourbon, or other drink of choice with smoke if you have the smoking gun. There is a funnel on the bottom side that the nozzle fits into. Be careful, as the tube is fragile. Category:…
For the glass 6 gallon big mouth bubbler fermenter. The lid that came with it has a rubber gasket that doesn't grip well and slides, especially when wet. I used to tape it down or put bricks on it. Then I got a printer and designed this.…
This is a mold to cast a adapter for the Storz & Bickel Might+ and Crafty+ vaporizer to combine it with a bubbler that has a 16mm glass tube. This Adapter MUST be casted from high temperature two component silicone! Don't use standard 2k…
Cap to convert glass 2L bottle to NATO40 bubbler for breathplay. Never do it alone, it is not work the risk. Print as one piece on the top screw with baseplate-only supports. Fits CoreOne printer. Inspired by Only inspired, my model is…
50's Art - The Wurlitzer Bubbler Jukebox 3D printable model.
The backpack itself is made of two parts, top and bottom. The metal rods are 8mm diameter stainless steel, and approximately 200mm long, but can be adjusted. I would suggest using aluminum because these were very hard to cut. I ended up…
