13 models
1988-94 GM c1500 Truck Radio Head Replacement Pocket Based On American International GMP333 Design. I've never printed this. I just designed it in CAD so that I could preview what various OLED screens might look like in the unit and how I…
A bracket to replace the fragile stand off posts that the light switch brackets screws onto on the backside of 88 to 94 c1500 dash plinths. I've repaired 2 dashes with this having it printed in Nylon with an MJF printer. The remnants of…
NOTE: As March 2023 this has not been printed or tested. A model of the 88-94 c1500 OBS Truck Ash Tray. This model is actually a bit deeper than the OE tray as it was clear that more space was available to extend it into. There are 2…
APC SMC1500I Bezel 2x M3x20mm bolts required to piece the front together. I tapped the PLA to thread into and it's plenty strong enough. I've yet to get around to filler/paint but the body of this is good enough to share for others to…
Yet another heat gun holder for the Honeycomb Storage Wall! This is a holder for the Porter Cable PC1500HG Heat Gun. It is meant to attach to insert-empty.stl and go on your Honeycomb Storage Wall. OnShape Document
A model of the 88-94 OBS C1500 GM_15599095 88-94 C1500 Junction Block Nuts. These have not yet been test printed. MJF Nylon would probably be the best method/material.
An ammunition box with a sliding lid for 60 9mm Luger cartridges. The box was designed for shooting sports disciplines that use six cartridges. Simply slide the box open and pour the cartridges into your hand. No more miscounting when…
This mount is for a Porter Cable heat gun, model PC1500HG, 1500watt. I designed it to install on a flat surface for holding the gun at an upright 30 degree angle. You can make your own holes with a drill, or by transferring a pattern from…
Bracket made from the old brackets of a 1992 C1500 as the previous ones disintegrated. This is the bracket found in the back left side of the main chassis, holding two lines, coming from the back brake lights and a line from the diff. I…
This handle should fit most GM trucks from 1995 to 2001, although I’m not certain of the exact years. It fits very well and holds up well. I printed my original one over two years ago, and the passenger side OEM recently broke, so I…
This is a part we designed to mount the Moog power supply (PFC1500W-48) on a vertical surface. It's a tight fit right now (which we wanted), but you should leave a little more clearance if you need to remove the power supply often. Print…
This is a pipe to replace the intake resonator/silencer on the 4.3L TBI intake for the 1988-1995 Chevrolet C1500 (OBS). 3MF Notes: If printing the split plate, ensure you are plastic welding the two parts together. This can be done inside…
An ammunition box with a sliding lid for 60 9mm Luger cartridges. The box was designed for shooting sports disciplines that use six cartridges. Simply slide the box open and pour the cartridges into your hand. No more miscounting when…
