Counting matching models…
Catapult Card A fully 3D printed catapult, prints flat within a card, so it fits in a C5 envelope, fairly powerful, lots of fun! Why Designed to be printed flat, including all the parts required for assembly. It’s a fun little toy, great…
Launch into Fun with the Uhltimate 3D-Printed Catapult! Unleash the power of precision and engineering with my state-of-the-art 3D-printed catapult! Perfect for hobbyists, science enthusiasts, and anyone who loves a good challenge, this…
This pop-up catapult prints in place, the only extra part needed is a rubber band. Though even if you don't have a rubber band, you can still launch manually! Note: Before printing you may want to test your printer's tolerance for print…
Fixed print-in-place clearance, added features for education
This print is an easy 3-part assembly. You don't need any supports or glue. Just print and click it together. Perfect to test your printer or just as a fidget on your desk. It makes use of a spring gear that will bring back the knob that…
---------------------------------------------------------------------------------------------------------------- Update Optional Storage Box I uploaded all files needed to store all parts for 4 players within the original game box.…
*revision note 14-07-2024: increased the strength of the spring and travel of the bucket. *revision note 19-07-2024 : For better shooting performance, the spring is even stiffer, a little flange is added for releasing precision and the…
Trying to stay organized as you explore and conquer Catan? Unsatisfied with the wasted space on the factory inserts and having to store everything in multiple boxes? Try these inserts designed to make setup, play, and storage a little…
IMPORTANT! You still need the original game of Catan. Print, Clean Up, Paint and Enjoy. The small discs on the edges are to improve bed adhesion, after printing they just snipp off. Full guide is on instructables (check source) I did not…
Loved the original design by @Przemo007 but wanted the development cards to lie face down. This prevents other players from seeing the bottom of the card as it's pulled. I've uploaded versions for the two card sizes I'm aware of: 80mm x…
A remix of Adam-M's Catapult Card. I just moved the spring support arm down to the print bed so you no longer need supports.
Catan is one of my favorite board games of all time, and even thou there are already plenty of version of 3D printed Catans out there, I really wanted to make my own. I found a lot of inspiration and I have remixed a lot of designs that I…
Settlers of Catan replacement parts(city, settlement and bridge) I create this things during the last jear. The models are close to the original parts. Print instructions print settings: LH: 0.1mm Nozzle: 0.3mm
The largest part of the ship is used to test whether your printer can print the entire model. Printing takes more than 30 hours and it is necessary to place suitable supports in it. This is the biggest (test part) of FOSS which is…
This is a fully 3D printed catapult capable of launching projectiles over 80 feet. The spring is attached to the arm using a hexagon, so you can add more tension by rotating the spring a little more before attaching it to the arm and to…
Print the cardholders and the hinge parts, now put as many holders together as you want. Also check out Catan Piece Holder: https://www.printables.com/model/362195-catan-piece-holder
Shoot anything as long as it's small. No matter how long or short. Doesn't look like anything, great for sniping your coworkers and have plausible deniability. Print it at any settings. Tested both at 50% infill 0.2mm and “draft” preset…
A catapult to throw any type of paper, small bullets... To shoot your friend or your co-workers! Print instructions Print all the parts as the import unless you feel you can print then in a better orientation. Some parts may need support.
No supports needed, but pretty tight tolerances. Scaling up can help with clearance issues. If your slicer lets you, select the throwing arm and up the infill and wall count.
Catapult inspired by Leonardo da Vinci, more powerful than a simple desk toy, roughly 110mm tall (frame) Easily printed within 24 hours, have fun! Be sure to upload photos of yours when its complete! Id love to be able to include them in…
Mein allererstes Projekt einst, jetzt überarbeitet für Multicolor. Und ein paar Probleme aus den Bemerkungen. Mit der alten Version voll Kompatibel. Die Siedler von Catan - Das Basisspiel für bis zu 6 Spieler. Das Original wird weiterhin…
A fully 3D printed catapult for chunkin mini pumpkins. Go for distance or accuracy! https://youtu.be/6TlCzzJzYZQ Printing All parts can be printed without supports Add brims if curling is an issue - especially on the base If parts are too…
I really liked the concept of the original that can be found here: https://www.printables.com/model/362095-catan-card-holder-v1 However, it was too small for the version of Catan cards I have. So this is a scaled up version to fit cards…
Spare part for settlers of catan desk game Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.05mm Ultradetail Infill: 15% Filament: Prusament PLA Wanilla White Category: Games
I just wanted a convenient place to find the weight of empty spools to try and better estimate how much remaining filament I have on each of my “nearly” empty spools. I pulled some of this information from other sites listed below and got…
Update 2026.10.28: Added a "V2" folder to make the insert compatible with the "Underworld" expansion. The challenge is to fit the small fabric bag inside without adding a lid lift. Any ideas ? ^_^ Todo: Complete the documentation. For…
Printed on Prusa Mini, wood PLA, 0.10mm layer Reuploaded from: https://www.instructables.com/3D-Catan-Designed-3D-Printed-and-Painted/
Welcome back guys! I needed 13 prototypes to get to this final model. It's a tiny catapult that has the size of a credit card. It is easy to print an fully functional. There is one model with a link to my youtube channel, if you print…
This is part of a long line of remixes. I grew tired of searching for projectiles so I added a small tray to keep them in one place. (note, marbles might seem like a good idea but I can assure you they are not) The original desginer of…
Thanks for all of the support on this model, and make sure you check out some of my others! V2 OUT NOW Original model by @PracticeFili_2157914 at https://www.printables.com/model/941396-the-ultimate-finger-catapult-easy-to-print-updated…
Fast Print-In-Place Catapult. No Supports needed, just a rubber band.
Number tokens for the base 3-4 player game and for the 5-6 player expansion game. Print pauses are recommended to change filament colors. The bottom and top layers are colored with the same filament used for the main hex tile rings. The…
Step into the world of high-stakes adventure with my 3D printed Balloon-Powered Boat - a vessel that not only boasts a sleek design straight out of a James Bond movie but also features an easy inflate function for instant action on the…
This is a catcher for your Gravitrax catapult. Use it together with the original Gravitrax base stone. The special thing about this catcher is that you can use the inset to choose which exit the ball should take. Tip: Glue the funnel into…
Has a 10mm flat bottom to print on bed. SIZE: 20mm ball SUPPORTS: NO BRIM: OPTIONAL
Introduction This is my attempt at a printed catapult design. I needed axel pivots to hold the parts in place so decided to use 1/8” (3mm) dowels instead of printing axels. So, while the card is printing, go down to the local hardware…
ball diameter 12 mm with bevelled bottom
This is a full set of the roads, settlements and cities that comprise the game tokens in the Settlers of Catan board game. Yes, there are other options out there, but the problem is, that if you want to print a whole set, then doing so in…
It's a Print-In-Place model, without the need for any support material. It also takes advantage of the material properties, meaning that there are no external parts or hardware, it's just the material that allows it to flex and store…
Quick howto print planeur15_crochet.stl, preferably in PETG, in vase mode with 0.18 layer height, 30mm solid bottom at 20mm/s with cooling fan enabled at full speed. print lanceur.stl normally in PLA (0.15 layer height, 2 perimeters, 10%…
This model is based on the 3D Catan hex tile storage system designed by Bert Haverkamp https://www.printables.com/model/41933-catan-storage-system but small enough to print on a Prusa MINI build plate. This works with the 3D Catan hex…
This organizer is comprised of multiple trays to neatly store all the components from the Catan board game and the 5-6 player expansion.
Introduction: Welcome to the ultimate playground innovation – the All-Age Catapult! This isn't your average, run-of-the-mill toy. Oh no, this is the pinnacle of fun that defies age, gravity, and possibly the patience of your neighbors.…
I have changed the "bucket" to be wider for bigger "projectiles" and added a thumb wheel of easy range adjustment. But the bigger redesign is the fulcrum. I split it into two parts to be printed easier. Now the hole for the axle goes now…
It features: 1- Outer measure (main rule: mm/inch) 2- Inner measure (main rule: mm/inch) 3- Depth measure (depth rule: mm / main rule: inch DON´T use main rule for depth measures) 4- Phone Stand 5- Keychain hole 6- Spring ideal for a…
🧩 Model Description The Mini Desktop Catapult is a simple, fun and surprisingly powerful print that turns a quick build into a flying success. It’s compact, fast to print, and super satisfying to use. Whether you're demonstrating physics,…
I added a front handle to the base to make it easier to hold the catapult. I also strengthened the wheel holders, as the original ones broke easily. I widened the lever, because the original one fell out after a few shots. I widened the…
for building instructions please see https://youtu.be/8ReAR9MRtXU, although this one pretty much explains itself…
V2 - Refined After getting a new printer, I decided to re-visit this model and refine some things. Printed on an Elegoo Centauri on slow speed and a 0.2mm layer height. Top of the chute still didn't print perfectly but much less…
There is one for each expansion; Base Game, Seafarers, Explorers & Pirates, Cities & Knights and Traders and Barbarians. Traders and Barbarians also has the camel and barbarian holders for the scenarios. They can be used in any…
This is a remix of https://www.thingiverse.com/thing:2178046 with the following features: fits inside the original game box (without the 2 Special Victory Point cards) note: tested on the Israeli version of the game box can be printed…
These are various styles of projectiles that fit in Adam-M's Catapult Card https://www.printables.com/model/211679-catapult-card . I printed the catapult in PETG, but didn't have anything to shoot in it, so I made these to fit nicely in…
This is an easy to print Slingshot/Catapult. It is a relatively slim and pocketable design made for backyard/walk around shooting with clay ammo and .6 or .7mm bands No Supports required. Use PLA+ or PETG for Strongest results. 5…
Castle dice tower with catapults for throwing and mixing dice - another one of my crazy ideas. I wanted to make this model a fun mechanical toy You need to print the lower part and the upper part of the castle, the floor, 6X catapult, 6X…
Fingapult is a catapult for your fingers. Come in two strengths, standard and magnum. Standard can easily lunch marshmallow 10+ feet (3+ meters). The magnum nearly doubles that. Please supervise children and avoid using hard candies. The…
SeaRescue Catamaran – 3D-Printed RC Boat (Mostly Functional, Occasionally Janky) What You’ll Need (V1 - Above-Water Propulsion): Motor: A2212 brushless motor (other sizes might fit too) Servo: 9-gram servo for steering Prop: 8045 or 8060…
This is our best catapult yet! 2 spiral springs power the winter snowball catapult. There are print in place bearings to help us throw further. A roller on the trigger makes it super smooth. Prints with no support in PLA. Print your own…
All informations are included in "manual" pdf BOM: 5mm carbon or glass fibre rod 4mm carbon or glass fibre rod a lot of m3 screws and nuts m3 inserts copper wire 05, 1 and 2 mm diameter and solder sailcloth How I Designed This Category:…
There is a small print in place catapult that can launch marble sized objects. The bigger catapult has the perfect size for ping pong balls. No supports required - best to print in petg 🔧 Key Features: Big Catapult: perfect for ping pong…
My version of storage box for 3d printed version of Catan designed by Dakanzla. www.thingiverse.com/thing:2525047 This model was inspired by following storage boxes: for laser-cutting: https://www.thingiverse.com/thing:2734977 by Dakanzla…
Longest Road Trophy - Settlers of Catan
It seems inevitable that when Klaus Teuber created his famous board came “Catan”, the numerous players would eventually ask for a 3D version of the game. And so, here is my interpretation of this wonderful game. Originally, I designed…
Unique Catapult HIGH-5! Fully adjustable. Throw Ping-Pong balls, foam golf balls, or even real golf balls, CAUTION: make sure you remove any breakables from the area. Print in place adjustable trigger, and Arm bearing to reduce assembly…
100% 3d printed catapult I made for a school project. It is designed to shoot ping pong balls and other similar sized objects. This print may require some sanding to work.
Dakanzla is da' man with his awesome multicolor printed design. Unfortunately, I only have a single nozzle printer and I cannot paint worth a damn, but I still wanted some artistic oomph to my set. I really didn’t like the monotone sets…
I wanted a card tray holder that would fit in the game box! I have used it every game I've played since and every one loves it and wants one! Need to print: Two of Part 1 Two of Part 2 Three of Part 3 Enjoy!
These shells have magnets so that Settlers of Catan hexes stick together and the board doesn't get shuffled around. I was heavily inspired by the model this is remixed from, but I made these models from the ground up with the following…
!!!PLEASE WEAR PROTECTION!!! NOT A TOY!!! I CAN'T ACCOUNT FOR ALL THE DIFFERENT TYPES OF MATERIALS OR STRONG ELASTICS YOU WILL USE. SHARP PLASTIC FRAGMENTS FLYING AT YOUR FACE AT MACH 3 IS NOT FUN! PROTECT YOURSELF!!! Demonstration: (Weak…
This is a simple upload of https://www.thingiverse.com/thing:4153125 , the Catan boat seafarers by ghostcoconuti . Das ist ein einfacher Upload von https://www.thingiverse.com/thing:4153125, dem Catan Seefahrer Boot von ghostcoconuti .
Dies ist ein Remix von Lukass' Electric pole raillroad 1:87 H0. Der Mast wurde verstärkt und vergrößert. Es wurden unten Befestigungen zugefügt. Zusätzlich wurden Halterungen eingefügt, um alte Märklin Querträger und Ausleger zu…
This is the base of a Catan trophy. It fits the city model of Dakanzla's Catan set found here catan-style boardgame 2.0 (magnetic & multicolor) by Dakanzla - Thingiverse . Print the city at 600% scale and then glue it to the base. The…
3D Catan Board Game - Cleaned up and resized for resin printers
A simple box to store and organize your Catan settlements, cities, and roads.
I designed and made this for our godson. Place blown up balloon on top chimney and watch it go. Makes for a nice bath toy even if you don't use the balloon propulsion NB: photos and video are of the old version. The uploaded model is new…
| BASIC DESCRIPTION | 3D model of basic resources in the game “Settlers of Catan” containers area seperate models that you can find in the links below each of the resource has 5 slight variations | DESIGN DECISIONS | these models are very…
This is a simple upload of https://www.thingiverse.com/thing:2865138 by Dakanzla . From cities & knights 2.0 only the knights and their activator token was taken. Das ist ein einfacher Upload von https://www.thingiverse.com/thing:2865138…
This is a complete travel-sized Catan board, except for cards, dice, and build cost cards. This was designed for printing with an MMU, but most parts can be printed without one. For the parts that currently require MMU (harbor keys and…
This settlement and city have been scaled to fit my Rivals For Catan 3D set.
All credit to Ray Fields for the look, concept, and original design. Go check out the Concealed Catapult page for assembly instructions and further discussion. ⚠This thing could potentially be dangerous if firing the wrong projectiles at…
This is a faithful reproduction of the Circuit de Barcelona-Catalunya. Its dimensions are 20cm long, 6cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple model,…
This model is based on the orginial walls of the German 3rd Edition of the expansion Cities and Knights for the game Catan . Its purpose is to protect a city against the robber. Every player can have up to three cities protected with city…
My son loved the Balloon Boat designed by K-eye, but I wanted to make it faster and more stable. This lead to the idea to modify it into a Catamaran. Two hulls leads to increased stability and two balloons means twice the power! This can…
There are a lot of storage options for TCG cards but nothing quite fit my needs, so 3D printing to the rescue. With bulk piling up in boxes and limited desk space for hunting for that one card I swear I had somewhere, I can't keep large…
I made this rubber band based catapul which can shoot up to twenty meters without any problems. It is very easy and fast to print and build. You just need to find a rubber band… Have fun!
The STEMFIE Desktop Catapult is perfect for shooting ping-pong balls or crumpled paper. The ball-holding beam moves using the energy stored by two rotor springs. To arm this catapult, you rotate the beam until it locks into place held by…
This is a whole set of catan pieces, 4 cities, 5 settlements, and 15 roads. NO scaling or rotation required. I measured a couple pieces and averaged to size. These will match the original catan game with no modifications. Print Settings…
This is a toy, spring-loaded catapult, designed to be 3D-printed. catapult spring loaded print-in-place (+40m m range) - Makeronline - More Than Fun It features an intricate, lattice base and arm structures for lightweight, strong…
Since 3-blade props are not too easy to get, I started to print the sizes I wanted to test. And what should I say… this worked out so well, that I've decided to share, but be aware: This is for advanced users and has been tested only with…
UPDATE: Remixed for dual magnets per side, here http://www.thingiverse.com/thing:2093075 I had 3 mm x 1 mm cylindrical magnets sitting around. These did not fit into Dakanzla's bases particularly well (and it required many magnets). I've…
We all know someone who could use this: perhaps to commemorate a specific event, or maybe just because it matches their sense of humor. OpenSCAD files are included so you can customize it. Almost all the customizer parameters are…
Wreak historical havoc with this working Roman catapult — a miniature Onager, named after the wild donkey for how violently it kicks when fired. Designed for real torsion-powered launches, this siege engine adds a touch of ancient chaos…
This model consists of a catapult game that can be played solo or 1vs1 (or you can come up with any other playing modes!). The model should be ok to be 3d printed without any supports and all the hardware you need besides the printed…
Toys for Tots is a genrous program aiming to provide toys for the less fortunate at Christmas time. IC3Dprinters organises a 3D printed portion where volunteer makers print toys for donation. This design is a donation to the pool of…
The token can be used in the board game Settlers of Catan. The design is inspired from the royal palace of the Northern Water Tribe. Transparent filament is used to give an ice sculpture look. Other tokens from Avatar Catan can be found…
Redesign of Catan player pieces with a lid. Fits with 5e Catan pieces The lid can also be placed on the underside when actively using. But I also added a version with a filled bottom, at which you cannot store the lid, but you don't need…
This tray fits cards ~68x45mm which you can find in the german version (Kosmos). Not sure about other versions. It's a remix of thing:4703126, which was made for slightly wider cards from international versions (had to find it out the…
I saw a model on makerworld (credit to uhltimate) that used leaf springs for a functioning catapult and wanted to see if I could design it on my own, while understanding how every piece works and what its supposed to do, and I had to…
![The Ultimate Finger Catapult [Easy to print] *Updated](https://media.printables.com/media/prints/941396/images/7192529_7d256018-9e3a-481a-9a42-30296430f78a_53933b0f-945f-46f8-bf3a-c4aaafb841df/afbeelding-van-whatsapp-op-2024-07-12-om-233547_1223b3e0.jpg)
