Counting matching models…
Bed Scraper / Spatula This is a modified version of the PRUSA one. Handle width is good, I just wanted it thicker. Handle is now 7.62mm thick. (0.300” inches) All edges finger safe, except front blade edge. PLA scraper version for TPU…
RJ-45 Network Jack Dust Cover Plug Wanted a good one, ended up designing my own. I wanted something that emulates a RJ-45 plug and stays in place. Sample blue parts printed in Polymaker PRO PLA. Tab actual locks parts in place. Tab also…
Update 2021-02-24: If you're looking for an 88mm height, take a look at Sharkoctopus's remix at https://www.thingiverse.com/thing:4754084 which locks the pieces to each other all the way up. Update 2020-09-23: francisesmodewhite found it…
I designed these to replace my original clips after they got damaged. Printed in PETG solid, these are very stout. Nice snap fit onto my 9mm diameter hiking poles. If you need a different diameter, let me know and I'll update the model…
A useful print to hold indicating desiccant. When the desiccant changes color and has absorbed all the water has held it needs to be dried out. This typically involves laying it out on a cookie sheet and putting it in the oven for a…
Printed on my Bambu P1S using PETG. Some filaments spool is bit tall, so I would suggest to print 83mm though 73mm can fit most.
Replacement impeller fan for Commercial Chef CCD100W. Print in ABS! Do not print this with anything less than ABS-level heat tolerance. I didn't try any other filament types. Press fit onto the motor shaft. Don't press it down all the way…
For more information and build plans, please visit my Etsy store!…
This is my take on the amazing Hive storage developed by O3D. Their boxes were not large enough for my use, so I designed my own. If you don't need this big of a box, please consider purchasing their design on Etsy or downloading the free…
This tray is a resized remix of @sblomfield trays for the Commercial Chef CCD100W6 / Westinghouse WFD100 utilizing infill meshing. It is sized to fit precisely between the stacked plastic trays which come with the dehydrator. Top and…
ER-16 Collet Pin Vise Handle 8mm bolt (CCD-v7) I have had many pin vises, and most aren't worth their money. This one was designed by a machinist (me). This will also work with the same 12mm ER collet shaft that is ER-11 and ER-8…
This is a Bahtinov Focusing Mask for a QHYCCD miniGuideScope. This greatly aids manual focusing by using three angled diffraction spikes to accurately focus.
Starlink Standard 4 Dish Mount - CCD v-16 (Case CAD Design version-16) For flat roof. It will be mounted on my Chicken Coup roof facing North. It is a flat roof angled up at about 16 deg. My roof is currently OSB plywood. I will paint it…
The important points: An extension to use the 235mm (9.25 inch) CCD100W6 dehydrator for drying filament. I don't have much space, and wanted to use the smallest dehydrator I could find that still had at least 10mm of clearance around the…
QHY CCD / C-mount adapter Printed with support. PETG/ABS / layer 0.1 !!! / perimeters 4x
Dvoudílný držák modulů DCCDIP2 od firmy Ignitech pro zapalování motoru Rotax 912. Držák je navržen pro montáž na místo mimo motorové lože letounu.
Unlock advanced astrophotography with our HEQ5 Pro Polar Scope to CCD/DSLR Adapter. Seamlessly attach your camera for accurate polar alignment. Elevate your imaging precision and capture stunning deep-sky wonders. Upgrade your…
Bajonet NIKON/T2 pre CCD Moravian Instruments, distance 9, 10, 11 mm
Retaining clips that snap onto the Commercial Chef food dehydrator. The unit is 240cm in diameter which is almost the exact same size as the Rubbermaid Commercial Products round storage container which I got on Amazon for less than $8.…
For this project I used a mt3608 boost converter to boost the 5V from the USB-C power source to 7V. Assembly is pretty much straight forward. Print 1 bottom and 1 top half, then 2 contact holders of which 1 has to be mirrored. The…
Had to make a custom bracket to mount my new AutoFocus to my Lacerta Newton. -> Q-Focuser Dummy Attention: the Standard Model has a different mounting holes layout.
Repositories for aquatic germplasm are essential for safeguarding valuable genetic diversity for species relevant to aquaculture, biomedical research, and conservation. Development of aquatic germplasm repositories is impeded by a lack of…
Simple lens cap for Sony 600TVL cameras, commonly used for FPV Quadcopter flying. Easily customizable for other camera lenses. Print Settings Printer: Fabrikator Mini Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Notes: I've had to…
Housing that can hold a GoPro HERO3/4 camera and a CCD camera side by side. The CCD camera body size is 30x30x11mm. How I Designed This Modeled with FreeCAD & Blender Category: R/C Vehicles
The Alien Box supplies a DCCduino, which has larger pins on the top. The mounting hole on Dsk001's model is too small for this particular Arduino Nano variant, so this is a quick and dirty adjusted model to compensate. No other changes…
PLA / TPU Coaster Tired of drinks sweating and dripping. This coaster has integrated sweat catch basin. Also good for hot drinks. I have gone thru many iterations, and settled on this. I have also done numerous color combos. Even with the…
CCD/CMOS Camera mount for F450 or RC Plane This is for CCD/CMOS Camera 28.5mm/30mm/33mm (take a look in the picture). You must to print: 1x fpv_camera_mount_base.stl 1x fpv_camera_mount_Xmm.stl (replace 'X' with '28.5', '30' or '33',…
Simple Money Clip CCD Version I just wanted a simple money clip. So I designed one. 2 versions below. version-2 no edge breaks version-3 edge breaks (finger safe-no sharp edges) Printed in Polymaker PLA. Both of these money clips will…
PRUSA CORE-ONE Magnetic Cable Holder (cable-tie) CCD I needed a magnetic cable hanger for the inside on my PRUSA CORE-ONE and my PRUSA Mk-4 enclosure. This is a Case CAD Design version. I printed this on my PRUSA CORE-ONE. Used Kexcelled…
PLA / TPU Coaster Tired of drinks sweating and dripping. This coaster has integrated sweat catch basin. Also good for hot drinks. I have gone thru many iterations, and settled on this. I have also done numerous color combos. Even with the…
Hirsch / Identiv Card Reader 1 Inch Back Plate (flat-no angle) Had an instance where I needed to mount on a concrete surface nearly as flush as possible. For OSDP card readers with connectors on the back or similar using rs-485. This…
Hirsch / Identiv Card Reader 1 Inch Back Plate ( CCD version-9t_20deg ) Had an instance where I needed to mount on a concrete surface nearly as flush as possible. This version has a 20 degree upward to make viewing and using the reader…
PRUSA Bed Scraper / Spatula Narrow CCD Version This is a modified version of the PRUSA one and CCD one. Handle width is good, I just wanted it thicker. This version is the narrow one. Handle is now 7.62mm thick. (0.300” inches) All edges…
Modify by"CCD holder for YI camera" and it can fix on 2020 aluminum extrusion Category: 3D Printer Accessories
This holder can fit 8mm thickness main frame EX. i3 PMMA main frame Category: 3D Printer Accessories
CCD/CMOS Camera mount for F450 or RC Plane This is for CCD/CMOS Camera 28.5mm/30mm/33mm (take a look in the picture). You must to print: 1x fpv_camera_mount_base.stl 1x fpv_camera_mount_Xmm.stl (replace 'X' with '28.5', '30' or '33',…
Posted in response to this thread Advice on conversion to GRBL https://www.reddit.com/r/CNC/comments/17g1o3o/comment/lj13n4g/?context=3
