Counting matching models…
i built this because i was too lazy to pay 15 bucks (CZK to USD) it is plenty fo strng for 25 Nm. i recommend printing out PETG min 6 paramterers. it fits ½ inch ratchet.
Giggle McDimples(Toy Story)
This is a DCDigital port cutout cover. If you are not happy with your DCDigital HDMI port cutout, you can use this to make it look a little more appealing. This only adds 0.4mm (2 layers at 0.2) to the HDMI port, so it should not…
ryobi drill holder ( lcdi1802 ), printed in pla+, 3 walls
This is the model for the rubber cushion with holds the two CDI Units. I modeled it after the original part with the number 30401MM9010. I printed it with Sain Smart TPU at 0.3mm Layer height. Support is only needed for the four top…
I was in the need of an Navigation device but couldn't mount it properly. So i've created this model to hold my 8" Tablet on the Radiocover of my Mercedes CDI220. Original Radiodisplay i need so that was the only opportunity. I've just…
A fork mounted bracket for holding the CDI mode switch after the headlight bracket is removed on TRS trials motorcycles. A nylon tie is required to attach the bracket to the fork leg. The bracket is sized to fit 39mm forks. The switch…
Uchwyt CDI dla motocykla Romet ADV 125-150. Model zaprojektowany dla TPU 96A. Powinien tez działać z innymi podobnymi motocyklami produkcji chińskiej.
Mercedes W169 CDI Keychain This keychain is inspired by the sleek Mercedes W169 CDI, perfect for fans of this iconic model! It was printed with a 0.2 mm nozzle for optimal detail and precision. The printing took approximately 2 hours.…
Dvoudílný držák modulů DCCDIP2 od firmy Ignitech pro zapalování motoru Rotax 912. Držák je navržen pro montáž na místo mimo motorové lože letounu.
The president of TECDIA, Mr. Koyama announced and called for the works for the 3rd TECDIA shacho challenge ( President award) . This model is the remix of Mr. Koyama's statue. I tried to design earing with these original models. The heart…
A contest was held for those who love TECDIA's nozzle brand, KAIKA, to enjoy revising the president's mesh model. It is a model designed to apply for it Click here for the design method. (sorry in Japanese)…
Used to secure adjustable RPM limit CDI box I purchased off Aliexpress.
Description. This is logo data for kaika nozzles produced by Tecdia. There are three types of STL data: a single figure, a single name, and a figure and name. The height of the logo is 2 mm, and the height of the base is also 2 mm. 説明…
Please use ABS with 5-6 perimeters or ASA. My original PETG model with 6 perimeters and 75% infill warped after use on the 70 Celsius degree program. Print laying down and slow down to 50-60mm/s for the whole body and raise temps to…
Gridfinity holder for the Ryobi LLCDI1802 Drill it uses a 6x5x6 base and can also hold a Dewalt screwdriver set
At the tee box, roll DiscDice into an upside-down disc. One die informs which type of disc to throw, the other informs how to throw it. Red die has: Backhand x2 Forehand x2 Roller Utility (your choice of grenades, scoobers, overhands…)…
For Arctic Cat Suzuki Engine around 1980. Print in TPU
When you use a NOCO battery, you have a ton of extra space. Use it to mount your CDI! V2 uses a sleeve to wrap around the noco nlp5 battery and the top holder to hold it 100% securely together. Not needed, but it's a finishing touch. The…
I bought new replacement CDI and Regulator Rectifier modules from Rick's Motorsports and wanted to sell my original working units, but would be missing the mounting plate.…
Front and back cover for Rcexl CDI Ignition housing for a modelengine. Uses 60x40x2mm aluminium profile. update 21. Aug 2025: Had to move the switch - so BackcoverV2
this is a holder for a 110cc 125cc 140cc 155cc pitbike CDI box. It only works if printed in TPU. i use TPU 95A but other types work too. Print settings are: infill 30%, brim enabled, support disabled, TPU filament, 20mm STRUCTURAL,
Note: I only have the rectangular screen CDIS, I haven't tried this for the round screen version. If you had to replace the screen on your CDIS (Central Driver Information System, the StreetScooter speedometer), you had to remove the…
Do YOU have Philips CD-i brainrot? Well if you have a Bluetooth to CD-i adapter, here's something that can be useful! I made a simple replacement snap enclosure. The PCB is friction fit into place with modeled standoffs and no other…
English: You can use the CDI rubber to replace the worn or broken rubber on your motorcycle. In my case, I used version 1 because mine was broken. Printing recommendations: Infill: 100% External speed: 30 mm/s Internal speed: 30 mm/s…
There are a number of vertical stands for retro consoles already, but I needed one for a Philips CDi 450 which didn't exist, so I made one. It is deliberately designed to be a bit loose, so you can use something like Tessa tape on the…
Gridfinity holder for the Ryobi LLCDI1802 Drill it uses a 6x5x6 base and can also hold a Dewalt screwdriver set
Handle printed in ASA on PrusaMK3s, Base and hinge core printed in PETG on PrusaXL using PLA as support with no interface space; both .3mf files are as described. You also have stl for your own slicing. You may need to file a bit the…
