Counting matching models…
Decided I want to pimp my Prusa MK3s+ up a bit so I hit it with the the Wu Tang treatment. It saddles over the top of the frame, with room for the factory Prusa spool holder to fit. Printed in PLA 0.40mm nozzle 0.15mm layers print face…
Hinweis: Aus Sicherheits- und Haftungsgründen dürfen Arbeiten an 230/120-V-Netzspannungsanlagen (Niederspannung) grundsätzlich nur von qualifizierten Fachleuten ausgeführt werden. Note: For safety and liability reasons, work on 230/120 V…
Update 16.03.2024: A new version (V3) is now available and got slightly changes to fit better into the extrusion. Feedback very much appreciated! Update 02/2024: V2 is now available. This version contains filament clips on both sides! See…
BMW E39 - Sliding cover for the central console storing partition of the BMW E39 Model. Suitable with part number oem 51
Update 16.03.2024: A new version (V3) is now available and got slightly changes to fit better into the extrusion. Feedback very much appreciated! Update 24.02.2024: A new version with a slotted hole is now available. This allows the…
I was not able to find a holder big enough for all my cables, so I created one. The holder can be exteneded to the required length by inserting multiple middle sections. I have a few thicker cables, so I created the left section with…
Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…
This is a gauge mount to fit 52mm gauges into a MK3 golf central air vent. The design replaces the existing air vent and includes a back plate to allow mounting of a variety of different gauges. The back plate has two print in place…
This model is compatible with the lego system.
Caja portaobjetos para el reposabrazos central de Fiat Tipo 2018-
I've seen many of these around but haven't got 100% satisfied with them, so I designed my own version. It's very useful if you want zero friction on your spools. This fits with almost all common 1kg spools. It fits spools with internal…
This part of the car is no longer available in the market as it is an old model. So i decided to design it from scratch only the upper part without the open-close knob. On one side, where it had the 3 metal clips, I converted it so that…
I designed this nozzle for the vacuum cleaner to be able to reach the really tightest areas of my car. Internal diameter: 34.8mm Available in three lengths
Makes Seat Models Ibiza mk3 Typ 6L 2002-2008 I was printed it from ASA in one piece in P1S
This part allows for a temporary/permanent replacement for the central handle bar on your Yamaha Tracer 7/700 (new model 2020). I have kept mine for about 300 kilometers, driving in all type of conditions and terrains without an issue.…
Snap in jaw covers for the Harbor Freight Central Forge 4" bench vice. Protective your work without the metal jaws marring the surface of plastic or other soft work materials. Comes in several variants with either large grooves, a…
realmente fiz para meu carro e deu certo Category: 3D Printing
This is rambros ' excellent EMD GP7 model for Dragon Railway , remixed with a Maine Central livery to print on a Bambu AMS. This contains the new files for the MEC livery, the rest of the parts and full assembly instructions can be found…
Volkswagen Polo 6N1 central console USB charger Insert · Background: I've recently installed a dashcam in my VW Polo, before this I had only the phone holder and I used a cable to charge my phone from one of these car cigarette lighter…
I took MKV's armrest storage box for 2022 hyundai tucson and removed dividers in the tray, added a pick up hole and rounded the edges. Thats all.
I designed this thing so I can mount the magnetic carholder lower down the central console. This keeps it away from my view but still easily accessible. My USB charging ports are also in the ash tray area, so the cable does not have to…
I really liked TechTobi83 's dock, but wasn't a huge fan of the Apfelfunk words or logo, so I've removed that part. Everything else is the same.
A simple and durable mounting clip for PEX pipes. Designed for easy wall or board installation. This clip features a snap fit to hold the pipe securely and a central hole for screw mounting. Perfect for water systems and heating…
This is a bin for the front part of the central console in the Polestar 2. Handy to keep your loose change, for example.
Very simple central console horizontal divider Printed in PETG
It shades the screen from top and side light sources very effectively but I found you still get reflections from the rear side windows so I have stopped using them in my car. When assembled the shade is snug to the top of the screen so…
These two objects are non-marring feet or tip attachments that are placed on the tip of the Central Pneumatic 2-in-1 pneumatic air 18 Gauge stapler/brad nailer (SKU 68019, 61661, 63156 & 64269) and the Banks 18 Gauge Air Brad Nailer (SKU…
Description: Simple model intended for 28mm WW2 wargaming, mostly Bolt Action. It is inspired by various village and small town houses that has been built in Bohemia and Central Europe in general since medieval times, that have part…
I made a replacement part for the central locking of a w201 trunk. Orginal part number (A2017500092) I printed it using my X1 CC with PA6-CF (100% infill) laying flat on the long part. works perfect so far. you may have to scale it…
It's the upper part of a polo 6N central console for 2 DIN chinese cheap navigation
HO scale model of the Central Ontario Railway station at Bannockburn, Ontario. Model is based on 1902 plans found online. Photos of the actual station show that it was built somewhat differently, with a ramp at the freight end of the…
Not sure how many people are looking for vacuum mufflers on Thingiverse, but if you are, you've come to the right place! I somehow managed to lose mine so I designed and printed a new one. To my surprise, it works pretty well! The airflow…
Space Port Central HQ At the end of the day, someone's got to run things. Usually, it's the guy with the most guns. That said, the Space Port HQ has six separate guns, keeping the natives good and restless. Keep your authoritarian figures…
Fits: CENTRAL MACHINERY 5 Ton 12 Amp Electric Log Splitter from Harbor Freight. If you are like me and lost the snap ring you can pick up some of these: https://amzn.to/3EwwkTB using my affiliate link :D. NOTE : included spacer goes…
Hornady's powder cop dies are expensive, and while they are good quality, I didn't see the need to buy 5 of them to go on different press toolheads. Instead, just take the steel rod and O-ring out of your Hornady powder cop die from the…
Topp C20 Ingranaggio centrale L'ingranaggio che si rompe sempre! per il montaggio non necessita di alcuna modifica
Steering wheel adapter for Logitech G25 base mount. It's a remix of a model by @vasilp. What's changed Height is +4mm Added wide central recessed part to fit central horn-button from racing wheel This object was made in Tinkercad. Edit it…
Every Ducato x250 owner knows that if you put too many heavy stuff in the central console storage compartment one (or maybe more) screw holes support may break. This three screws are removed on every car service to access air conditioner…
The Kennebec Central has 8 coal cars. 3 of them were made from flatcars. 5 of them were longer. These are old files. I use two 1/16" dia tungsten welding rods under the cars to keep them straight. Category: Hobby
Gridfinity holder for Central Forge 12 PC Needle File Set The twelve holes are 9.5mm in diameter and 36mm deep. If you want to install M3 bolts in the bottom, just punch through the thin skin above the magnet/bolt holes Remixed from…
Imprimir el modelo con soportes He decididó pintar el modelo con pintura acrílica aunque también se podría usar el cambio de color en tu impresora con el comando M600.
I wanted to print this as a gift but I didn't want the Apfelfunk badge on it, so I used Tinkercad and Blender to remove the badge. I just used Tinkercad to shorten it down because I thought I would be able to completely remove it, but…
REMIX - only difference is the magnet sits centrally, at request. Here's a tool to easily magnetise bases of mini's (reupload). To make life easier and a boring task quicker, I created these shims to rest the bases, put some glue down and…
The Orville - Planetary Union Central Logo Change color after 2mm
🇺🇸 Welcome to Denver, the Mile High City! MiniWorld3D's founder Dany Sánchez lived in Denver for some time and created several models representing landmarks of the city. The Central Presbyterian Church of Denver, Colorado is a historic…
Assembly Model is flexible enough to slightly bend it to fit into the already existing slots of the glove box. Print settings Material: ABS/ASA & TPU 95A No supports 0.2mm layer height recommended Concentric top layer fill to give a nice…
This is a NYC, then Penn Central concrete arch railroad bridge, described at the following link: https://historicbridges.org/bridges/browser/?bridgebrowser=michigan/oakwoodsmetroparkrr/ This bridge is located in a lowland hardwood forest,…
Kennebec Central boxcar. I print the frame upside down right to the build plate. Category: Hobby
GoPro mount for Decathlon Rockrider that has a central square arm Print instructions Printed in .02 resolution. 25% infill with PETG filament
A Friends Central Perk coaster design in the style of Starbucks. Test printed on Bambu A1 with AMS Lite, filament used: Elegoo Rapid White Elegoo Rapid Black Elegoo Green Commercial Rights If you wish to have commercial use rights, you…
Imprimir el modelo con soportes El modelo esta pintado con pintura acrílica.
Best choise for adding instruments to your Golf/Rabbit ! Normal instruments are 52mm (2 Inch). There are several versions. Please contact me if you have any ideas or suggestions on this ;) Screws needed are 3-4mm (1/10inch - 1/6inch)…
I love the design of Jacks Traktor Sprinkler, however I had a few of issues with the central mast or pinion of the mechanism. The printed pinions always broke right at the upper thread, just a tiny bit of force on the spray-arm and it…
its the central differential gear for kyosho dbx i've printed in petg with 100% infil, it works since a couple of months without issues (as the dirty pictures show :-) ) Print Settings Rafts: No Supports: No Resolution: 0.15 Infill: 100…
The grid pattern is made with prusa slicer. I made the blank plate, with only 4 fixation holes. Then in the center i added a cylinder of 6" (152mm), enforcing 2 things : No top layers or bottom layers honeycomb infill this causes the…
Centreur d’embrayage 28 dents golf 4 1.9 TDi
Hi there. Here is my model of Christchurch, New Zealand's central city, encompassing the heart of the central business district and showing some of its key features. Model was created by exporting the 2020 1m DSM dataset from LINZ to QGIS…
A very simple scale and detail remix of one of the Greeble City buildings, adapted for use within a generic SciFi setting, at 6mm scale. I've added extra detail and scaled this specifically for 6mm scale FDM printing. This set is intended…
Portable holder for 16 Q-Tips. Each half can function as a holder for your Q-Tips while you are going through them.
House inspired by house seen in Jewish ghetto in Trebic town in Czechia. Similar houses appeared all over Central Europe, from Germany to Poland. It is modelled based on 19th century look, but it can work both for earlier and later time -…
Remixed to more closely match the existing part. upper recessed ID will require some support to print.
The plastic clip for the central locking on my VW T4 was broken. I designed this thing and printed it in TPU. Now my trunk locks again :)
Adjustable door mount to centrally mount TP-Link Tapo C200/C210 cameras for Bambu Lab printers. Mainly for the P1 due to the poor built-in camera (only 0.5 FPS), but fits the X1 too in case you wanted a different camera angle Features :…
Lamp decentralizer with a screw to secure a lamp cable to hang a pendant lamp down from a different location than the ceiling rose. Clean the threads with a normal m6 bolt first for smooth operation. The lamp hook can be used to guide the…
This is the central component that I designed to create a tripod using RostaP's Multifunction Arm Mounting System . The central piece is designed for the small version. You need at least 3 arms and 4 small bracket nuts to assemble the…
Imprimir el modelo con soportes El modelo está pintado con pintura acrílica aunque también se podría usar el cambio de color en tu impresora con el comando m600.
CENTRAL GRILLE SEAT LEON 1M/MK1 CUPRA // CENTRAL GRILLE SEAT LEON 1M/MK1 CUPRA IN HONEYCOMB // IN HONEYCOMB
Mazda CX-60 central console - box for small stuff in car
This is a scale model of the central third of the Las Vegas Strip, Nevada, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks…
I think it's best to print it with PLA. Supports are not required. Good adhesion to the build plate is needed. Remember that you can always add some glue, but this is last resort.
Lampara Rosario central para led
cierre guantera central mitsubishi montero, imprimir de forma vertical para que no se rompa, con soporte a la base.
Simple shed intended for 28mm wargaming. Could be from anytime between 17th century to present day, but made with Bolt Action in mind. Big enough for small squad or machine gun team. It has (simple) interior - dirt floor, doors. Consider…
This part goes to the Central Machinery small drill press sold at Harbor Freight. The original part is made from plastic and broke, so why not take a lot of extra time to re-design in Fusion360, slice in Cura5, and then print for a couple…
Warning: You’re being attacked by Henry the Lion!!! First of all, don't get intimidated by the height of the model or the various colours. Although being close to 40 cm from ground to pinacle it is modelled in smaller pieces and…
Introducing the Workshop Holder for ETA 6497 Watch Movement - a versatile and customizable tool for watch enthusiasts and professionals alike. This 3D printing file allows you to create a sturdy and practical holder specifically designed…
A 3d model of one of Da Vinci's centrally planned churches. Paris, Bibliotheque de l'Insitut de France, MS B 2173, f.22r
Materiál PETG. Spodní část není nutné připevňovat k CB
Don't let the simplicity of print-in-place fool you—this is a fully functional, ringing wind chime engineered as a single, support-free model. This model features a central hanging gong (beater) suspended inside. To achieve the necessary…
One of the parts required for wltoys RWD conversion. Enjoy and left a comment if any improvements are needed. Also don't forget to visit my channel to get the latest updates:…
You can better organize your bathroom towels. I offer the model of towel hook / holder. You can mantle it on ladder central heating without screws.
Logos for Harbor Freight brands: U.S. General Pittsburgh Haul Master Central Machinery Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you're looking for a particular logo, let me know and I'll try and get it for…
Update: I have designed a new and better drawer layout. You can check it out here. ----------------------------------------------------------- The drawers for the US General v2 Toolbox fit Gridfinity baseplates in a 13x11 layout. On the…
It slips tightly over the jaws, and I can slip it off if I need to expose the steel again. Quick print with TPU. No supports needed. Print as-is. I used 30% infill and 0.2mm layer height, but feel free to experiment!
Tried making them with clip-ins like the original but the PLA was not flexible enough and kept braking. I went with the screw together and that works better and less likely to brake. Hardware used are (3) 5mm nuts, (2) 5mm x 30mm screws,…
The Tab logo for the University of Central Florida. Print it out in three parts. I used black for the base, gold for the Pegasus and white for the letters. All parts should fit with a little trimming or a rubber hammer. If you don't have…
My father asked if I could design this for him as the OEM throat plate didn't set quite flush with the table. This can obviously be used as a replacement though if you've broken or lost yours. Update 11/6/19 - Added a updated .stl of the…
Dividing partition for Akro-Mils AkroBins part number 30-220
Minnesota Wild NHL team golf ball marker (25mm diameter, 2mm height and 10mm spike). Usage Place on the green to mark your golf balls location when it is in the travel path of a golf ball further away from the golf hole. Printing Tips For…
This is the first version of a key / remote controller / charging card holder for the center console of the Lynk & Co 01. I will now work on the fittings to make to looks like integrated to the console.
The Hive Egg Fish Cave is a sculptural, egg-inspired aquarium shelter that blends organic form with parametric hive-like openings. Designed to mimic natural refuges, it offers fish a safe retreat while maintaining water circulation…
This is a cover/mask for a Central Forge (Harbor Freight) hatchet, retained with a rubber band, string, or paracord. I'd recommend printing this with the long open edge down, triangle loop up, with a brim, but other orientations may also…
Use only with manual gearbox
Central Asian Shepherd Dog Alabay Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
A remix of @LiaIsTheCutestKitten hydraulic press knob to fit a Central Machinery 20-Ton shop press.
A central support for a Wardrobe Oval Tube. Printed in PLA, 0.26 layer height, no supports
Chiariamo per chi avesse timore di fare danni apportando questa modifica, che il sistema è adatto sia ad utenti che fanno uso della X1 come mezzo di apprendimento effettuando modifiche hardware avanzate, ma anche per quel bacino di utenti…
Soporte Multifuncional que puedes colocar a lo largo del eje de la Qicycle realizado por impresión 3d en PLA, el soporte multifuncional consta de 2 abrazaderas que pueden colocarse a lo largo del eje central de la bicicleta, llevan una…
Prototype Not Tested! GIRA Centralplate 3-compartment 2x different Solid Know Editions. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment: Visible surface on print bed Legal…
Made in China en mode très fragiles les pièces de bras robotisé dénichées sur le net se casse dès leur montage (et sans forcer). Un peu de PLA et une imprimante et hop on refait ça proprement. à coller ou comme moi, 2 petits forages avec…
