Counting matching models…
Simple tool holder to hold the tools that came with the Cetus 3D printer. Fusion360 project link: https://a360.co/2JfKc77 Print Settings Printer: Cetus 3D Rafts: No Supports: Doesn't Matter Resolution: 0.25 mm / 0.5 mm Infill: 15 %…
I made this part to replace the original fan duct, because the original fan duct cooling effect is not good. I tested the original fan duct, although the original fan is not weak, but the cooling effect is still not good, because most of…
I have printed a few things using TPU on the Cetus with mixed results. Much too frequently I'd have failed prints because the TPU would bend and push sideways, out from between the feeder gear and the cold-end of the nozzle. My solution…
This is a holder for a Roland Vinyl cutter to attach it to the side of a Cetus3D extruder. I tapped the existing holes in the extruder to M4, but you could probably use nuts on the inside too. N.B. This is for an original kickstarted…
This is my version of Z axis cap for cetus3d mk2 extended. It is part of conversion to opensource tinyfab MCU, that requires mecanical switch for endstops. Also it has an integrated cable holder. I tried to model this thing in a minimal…
voila un support a imprimé et a utilisé avec les profilés fournis avec l'imprimante pour tenir la bobine d'impression. comme a mon habitude .je fournis le fichier source pour être modifie si besoin.par contre, fini freecad, j'utilise…
This is a holder I designed for a precise Z probe for bed levelling. It allows for very precise bed levelling with small offset from nozzle. Compared to it inductive probes are crap. I used it to do grid compensation in smoothieware. My…
Modified the original part for an air flow which is directed downwards/vertical and not horizontal/diagonal. Print Settings Printer: Cetus3D Rafts: Yes Supports: No Resolution: 0.2 mm Infill: 100 % Category: 3D Printer Parts
Originated from the MellowFlyRRFE3 holder for the Cetus3D MK2. I remixed it, so it also has space for a Raspberry Pi Zero 2 W to use with Klipper. Only tested the fitment with an SKR E3 V1.1 DIP and V3.0. Original repo:…
This is my version of X axis cap for cetus3d mk2 extended. It is part of conversion to opensource tinyfab MCU, that requires mecanical switch for endstops. I tried to model this thing in a minimal and elegant manner. Use two M2.5 12mm…
This part should prevent the motor to bend which means the belt could slip from the pulley. On the picture there is no screw, because I have to look for a long one (M3x12 mm). Hope you can imagine what I intent with this part. If you have…
A mount to attach a M12 bed levelling sensor (induction or capacitive) to a Cetus MK1 printer. It should also work with an MK2 printer. Needed parts: 3x 8mm M3 cylinder head screws with nuts Print Settings Printer Brand: Prusa Printer: i3…
The included cable mount for the extruder cable is too small. Additionally the Y-axis stepper motor cable flaps in the breeze. This cable mount takes care of both and makes use of the grounding cable and therefore frees one t-nut and…
With this part the cable at the top end of the z axis can not move out of the profile. Use this part at your own risk. You could break the part where it should fit into. Print Settings Printer: Cetus3D Rafts: Yes Supports: No Resolution:…
Download file .fff ; import profile for S3D Remix @SyntaxGeek profile 0.2 - 0.6 nozzle https://www.thingiverse.com/thing:3035906 Update 21/10/2018 I loaded the cetus plate drawing; so you can place the piece away from the screws looking…
