Cetus3D Motor Mount Straight Adjuster
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This part should prevent the motor to bend which means the belt could slip from the pulley. On the picture there is no…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This part should prevent the motor to bend which means the belt could slip from the pulley.
On the picture there is no screw, because I have to look for a long one (M3x12 mm).
Hope you can imagine what I intent with this part.
If you have any questions or ideas for improvements please let me know (comments or message).
I also will do such a part for the z axis motor mount.
NOTE: Use at your own risk. To modify your printer could void your warranty.
Print Settings
Printer:
Cetus3D
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
99%
Category: 3D Printer Parts