Cetus3D Motor Mount Straight Adjuster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part should prevent the motor to bend which means the belt could slip from the pulley. On the picture there is no…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This part should prevent the motor to bend which means the belt could slip from the pulley.
On the picture there is no screw, because I have to look for a long one (M3x12 mm).
Hope you can imagine what I intent with this part.
If you have any questions or ideas for improvements please let me know (comments or message).
I also will do such a part for the z axis motor mount.
NOTE: Use at your own risk. To modify your printer could void your warranty.
Print Settings
Printer:
Cetus3D
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
99%
Category: 3D Printer Parts