Counting matching models…
Start with White, then go Black, Green, Yellow, Blue, and Red last. 6 colors/ 5 changes total. You can use just 4 colors and stop and it will still look good, just all the flowers will be the same color. 2 color version →…
Print approx. €4.59–€5.61 excl. taxPreliminary estimate for one variant
Start with White, then go Black, then Red last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Print approx. €3.49–€4.27 excl. taxPreliminary estimate for one variant
Introduction My primary school child needed something for the class Valentine exchange. We didn't want to go with candy or the typical ‘supermarket’ boxed cards. My child is constantly searching for a bookmark, so I decided to create a…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Fun dangling explosive earrings with a multi-color print utilizing filament changes. Excited to see what color combinations you choose! Size up or down but watch the size of the post hole. We included the gcode for a set. But feel free to…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
I don't have much to say about this one. Introducing "The Unmissable Detail That Changes Everything" – a playful 3D printed model designed to challenge your perception and spark curiosity. Are you ready for a mind-bending experience that…
No supports, a lot less time and materials than others. I built it from scratch after seeing Wolvies, so it's not really a remix. This one is one piece, completely rebuilt with hollow interior and shorter profile. Designed for…
I took the V3 SE rails mod and applied all the changes from the comment section. @RainMk_1581311 flattened the model for aesthetic reasons, and removed the tall “guides” that sit around the rails, which possibly restrict the carriage…
I really like the original design intent but I wanted it to be more easily removable so I slotted the mounting holes so it can just be lifted off and added magnets to secure it. I prefer the look of hexagon holes so I revised the exhaust…
Jesus Changes Everything Sign Compatible With Hueforge Stands
Start with white, then switch to black at 2.2mm, red at 2.8mm. 3mf added with color changes. With/without holes. Designed for single color printers! Just add pauses and change filament!
I took the V3 SE rails mod and applied all the changes from the comment section. @RainMk_1581311 flattened the model for aesthetic reasons, and removed the tall “guides” that sit around the rails, which possibly restrict the carriage…
This is the finished design to match the remixed K1C / K1 Riser V3. Update 08/04/26 Added TPU spacer to get the twist lock just right. Update 24/03/26 V1 has place for 3x M3 nuts. V2 has place for M3 copper heat inserts. Update 22/03/26…
We wanted to print a flower on a base for a birthday party table topper, but every flower we printed from MW ended up breaking. Adding supports to the model should make it print without any issues.
Introduction My primary school child needed something for the class Valentine exchange. We didn't want to go with candy or the typical ‘supermarket’ boxed cards. My child is constantly searching for a bookmark, so I decided to create a…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Hello, Here I like to share my Multicolor Print, on one layer, with several Filament-Changes on same layer look at the reference picture to match the original colors or choose free which colors you have and or like this all was possible…
Sheep face with TP holder. Tiziano had done a great job but there were just a couple tweaks I wanted for ease of hanging.
A Corsi Rosenthal box inspired by the 3d Handyman's Model B design. I like the look of it and it and filters can be changed out in seconds unlike the original CR box which requires duct tape or hot glue. I live in Australia and parts and…
You do not need a multicolor printer to print a hueforge, follow the directions below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Add pauses in your slicer at the layers below and swap colors: Swap…
You don't need a multicolor printer to print a hueforge, follow the directions below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Add pauses in your slicer at the layers below and swap colors: Swap…
Start with white, then switch to black at 2.2mm, red at 2.8mm. 3mf added with color changes. With/without holes. Designed for single color printers! Just add pauses and change filament!
Pi logo bracket I made to sit in front of my Pi on display. Prints in 3 parts (bracket, green and red plates). The bracket itself is fairly beefy as I am using it to help prevent members of the public from removing the game controllers…
A 50mm traffic cone already with color changes in the file, that's it.
I loved the look of the motor cover by @Geekware but don't have an MMU so printing vertically would be very time consuming. And nearly certain to fail. Printing flat and sinking the handle for opening the cover would make it hard to open,…
I added windows to the front and rear. Front scoop and rear exhaust. Tires and Wheel to use rubber bands.
Mine: Rigid straps with M5 mounting, bisected "filters", filter insert
Maxed out an XL build plate (14x17 hexagons). To print the MMU version, import it into your slicer, right click, split into objects.
Test your MMU. Make 132 tool changes and do not waste too much filament. Easy model, easy print. After 132 seamless tool changes you might feel more confident in your MMU. Have fun with this solution, happy printing! Explore my other…
Dear all, First of all my starting-setup: MK4S with MMU3 and Enclosure (Un)-Original Prusa Drybox Classic ( LINK ) MMU3 5 Spools auto rewinder adapter for (un)original Prusa drybox ( LINK ) Crossbeam 20mm for MMU3 ( LINK ) Fixation for…
A unique 3D printable creation — this Guitar String Winder Peg Winder, Ergonomic Handle, Fast String Changes Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
Modified: - Reduced motherboard "standoffs" holes. - Added a 3.5" display. - More Motherboard's IO Plate spacing
This is the finished design to match the remixed K1C / K1 Riser V3. Update 08/04/26 Added TPU spacer to get the twist lock just right. Update 24/03/26 V1 has place for 3x M3 nuts. V2 has place for M3 copper heat inserts. Update 22/03/26…
We wanted to print a flower on a base for a birthday party table topper, but every flower we printed from MW ended up breaking. Adding supports to the model should make it print without any issues.
Adjust the fader by hand and your system volume follows. Change volume in software and the fader moves on its own to match. It works both ways, all the time, automatically. This is a single-fader motorized volume controller for Linux…
Adjust the fader by hand and your system volume follows. Change volume in software and the fader moves on its own to match. It works both ways, all the time, automatically. This is a single-fader motorized volume controller for Linux…
Modified the tip to add the Crossbow's original bow arm mount as decoration. I did use 2 m3x8 screws to mount the colored tip. This does reduce access to the front nut. Strengthened the front stock section, I had the part break on me, but…
I designed a slip-on mouth piece for this particular ocarina in Fusion 360 that changes the angle of this Ocarina mouth piece by 45 degrees to make it more comfortable to play. I printed my ocarina at 80.7% scaling (Eb tuning) so I…
The MMU2s requires some love to get up and running reliably. In order to prevent constant babysitting down the road a proper test is required. Enter the MMUTT - MMU torture test: 1000 tool changes , 5 colors , printing time ca. 20h…
Recently, I found a nice bottle cap opener model designed by Chya ( https://www.printables.com/model/35588-bottle-cap-opener-v2 ) that prints and works great. Here are some simple steps that allows adding a cavity for a magnet using…
Right now I'm calling this style “ Relief Topography ” It's easy to print multi-color images on a single-color printer. I started with black and got lighter with each change. There are 3 stops built into the gcode where you can switch to…
Right now I'm calling this style “ Relief Topography ” This is built for single-color printers so start with black and work your way to white. Filament change stops are included. Link to Fine Art Collection:…
Right now I'm calling this style “ Relief Topography ” Start with dark/black and each change move lighter. 5 colors/ 4 changes total. Link to my Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/345687…
Right now I'm calling this style “ Relief Topography ” Start with dark/black and each change move lighter. 4 colors/ 3 changes total. Link to Fine Art Collection:…
I'm calling this style “ Relief Topography ” Start with dark/black and each change move lighter. 5 colors/ 4 changes total. Link to Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/345687 Quick Guide to…
I'm calling this style “ Relief Topography ” Start with dark/black and each change move lighter. 5 colors/ 4 changes total. Link to the complete Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/345687…
I'm calling this style “ Relief Topography ” Start with dark/black and each change move lighter. 5 colors/ 4 changes total. Link to the complete Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/345687…
I'm calling this style “ Relief Topography ” Start with dark/black and each change move lighter. 5 colors/ 4 changes total. Link to the complete Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/345687…
Start with White, then go Black, then Red last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black, then Red last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black, then Yellow last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black, then Red last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black, then Yellow last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black, then Red last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black, then Red last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then Grey, last go Black. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Black, then Red last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Start with White, then go Blue, then Black, then Red last. 4 colors/ 3 changes total. ~~I chose this order because I think it looks a little better at the end. Gives the queen more height vs the background. Normally I want the colors on…
Start with White, then go Black, then Blue, then Red last. 4 colors/ 3 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Update 3-13-2023: By request I updated the Honeycomb-Ribs Big Bambu Box to use eight 8mm x 3mm magnets. Update 1-10-2023: Updated the Honeycomb-Ribs Big Bambu Box with 6mm x 2mm magnet to have spots for 8 magnets. Update 1-3-2023: By…
Small changes in the design. Letters on the cover (ALL WE NEED IS LOVE) for two colours. There is also a piece to cover
Bambu Lab Poop/Purge Box for 1000+ Filament Changes. Hold in place with 6x 6x3mm magnets. If you have different magnets, let me know. Size: 250x250mm
(NOTE ON PICTURE: I ran out of red PLA so I could not reprint this - but I will need to adjust the speed and line width since there are some gaps here and there - its just slicer issue - not the model!) I wanted a simple and small ‘GAME…
A nice marble maze. Problem-free printing of all parts! Thank you ericman314 for publishing! … not to forget HeiLaut for the variant with holes! However, the disappointment came quite quickly, during the first attempts to play. I chose…
This is the Roland Garros Logo with 2 color changes. Have fun !
Introduction I play pétanque at my local pub (The Wheatsheaf, Tattingstone, Suffolk, UK) and our old scoreboards got very shabby, eventually breaking. I decided that we should have something better - but, like all these bright ideas, the…
I have made two changes to the original design by Tech2C in order to make it easier to fit the handle cover. The changes simply reduce the thickness of the Trigger and Firing Lever from 5mm to 4.2mm. I also wanted to reduce the thickness…
Following on from Bad Brad's Gear O'Clock (amazing) and VeryWetPaint's accessories (brilliant), I have produced two plates - one for the odd numbers and one for the even numbers - dimensions still in inches. There are another couple of…
DISCLAIMER: this is all custom made for my printer and I doubt it would easily fit others' printers and needs. I'm sharing these files in case someone finds them useful, not for directly doing the same modifications as I did, but this may…
A very basic Direct drive mod. Just take off the hotend fan, hotend, and pom wheels, attach it, and cut down the bowden tube. At most youll need a extension cable for the extruder motor, Im getting three for $9 (which is why all those…
First of all, thanks to "Creative MinerX" for his 3D printed version of "Dowel Puzzle", especially for the filigree, practical cover that makes the puzzle transportable and gives it a more valuable look. Unfortunately, the cover causes it…
The original ‘The Unmissable Detail That Changes Everything’ broke, so I made my own version. Upsize to 150% for larger fingers.
This edit of the Voron Warning Sign by TDX3D raises or lowers certain surfaces to make it easier to print in multiple colors using z-height filament change gcode. I don't have a filament change unit like all the Bambu ballers, so this is…
Start with White, then go Black, then Red last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
P1P vision handles Door Knob Remixed. ams ready. only 3 color changes!
This is a dashboard for 3DSets Model 7 Buggy designed for a double colour change at layer height. Open the 3MF in PrusaSlicer and press Slice now to see the layers the colours are changed at. Print at 0.15 mm layer height using PLA. Also…
Found the original model to involve too much work to assemble the 2 pieces and get the grid ready in slicer software.
Remixed the excellent 6in magnetic duct system to allow for a 4in version and also add a 5in collar that fits the 6in
A fun, dual mounted necklace pendant charm with two holes in the model to easily mount on jump rings and onto a necklace. .2 layer height. Utilize filament changes in slicer for color change. Enable ironing for a smoother finish. Check…
Based on David Leon's design (https://www.printables.com/model/392774-kill-team-2021-token-box) I made the order slots smaller to fit the original tokens Made the lid a bit taller to be usable as a dice tray Some slight size reduction to…
Refer to original clip-on storage project for more details. This model features minor adjustments to make it easier to print vertically without supports. (I rotated the angle of the hex nuts and added a draft on the adapter pocket.)
We are short on sink storage, so needed a unique toothbrush holder to fit the space. This daisy design makes us smile. Utilize filament changes for easy multicolor printing. The petals work to keep messy brushes apart and separate. We…
We are short on sink storage, so needed a couple cute little holders to fit the space available on the sink. This daisy design makes us smile. Utilize filament changes for easy multicolor printing. The petals work to keep messy brushes…
Fun dangling earrings with three-color mushrooms. Utilize filament changes for color change to achieve a multicolor print with a single extruder. We included two versions (one for each ear) so they frame your face better. Size up or down…
We remixed this outlet cover to match the decor in our home. It would be perfect for a kids' room or a retro or vintage room. Print daisy side up with supports – I like snug supports for this. If you are worried about finish, depending on…
If you have a Fixdry drier which can dry 2 filament spools at the same time, you know potentially the problem: You have to lift the lid and fiddle around with it while you insert two spools of filament wile pulling the two filament…
I used 3 mg995 servos and 1 sg90 in the gripper to power the arm. Used M3 screws to assemble everything. After adjusting the design I printed it in normal infill settings of 15-20 and haven't noticed any issues.
Toyota 4 Cylinder Engine 22RE, Complete Working Model - remix with minor changes
