Counting matching models…
Chachapoyan Fertility Idol aka Golden Idol from the Indian Jones movie Raiders of the Lost Ark (1981). Using Fusion 360 I was able to reduce the mesh by 75% without losing too much quality. PolyLite Silk Gold: https://amzn.to/46fmrag 1:1…
After creating some more complex models/containers with threaded attachments and supports, finally came up with this simple and less bulky design. The smaller cap goes into the larger portion. The larger part attaches to the top of the…
I have made the Montague Medallion from Fortnite, continuing my series of shield medallions. This one comes with an optional two-part print so you can make the blue crystal in the middle of it without needing dual-extrusion/AMS
Model by the ever talented Vibapop! Go check em' out! https://sketchfab.com/VibaPop I've got a bunch more deltarune prints on the way, so stay tuned!
Chappie / Lucky 13, If you make it, please leave a picture.
I always used to lose my chapstick. Now I might actually be able to finish a tube….maybe. Print with supports at whatever layer height you want. I recommend using 4 walls and at least 20% infill to keep the loop strong so It won't break.
Somewhere to put your chapstick.
Rosslyn Chapel Master and Apprentice Pillar.
This model is similar to the Little Ouchie fidget going viral on Tik Tok. This one features a storage location fit for chap stick tubes. I could only find a larger off brand lip balm my kids had around to use as a reference. The lid…
This is the new chapter 5 season two medallions
Always loosing your chapstick? Look no further, here's a perfect chapstick holder for your nightstand, kitchen, car, drawer, cabinet or wherever you keep your chapstick. Imagined, designed, and created by my 9 year old son who gets really…
A charming, collectible-style bust of silent film legend Charlie Chaplin. Designed with smooth surfaces and a minimalist clay-like finish, this stylized piece captures his unmistakable features—bowler hat, mustache, and expressive eyes. A…
Gridfinity chapstick holder. Made this for the ChapStick brand. Might fit others.
I got tired hearing my wife's (and son's) chapstick/lip balm rolling around in my center console. Of course, I had to 3d print a solution. Should fit most visors (tested and fits on two different Ram model years, two different Jeep…
Designed to hold standard chap stick and utilize a carabiner for clip on. I printed one in PLA, PLA silk, and PETG. All printed well no supports were needed - I printed with both open holes pointed up highly recommend .16 layer height and…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Season 3 Chapter 5 Medallions. Created from SVG. I've only printed at max speed to test the designs but some improvements can be made for a better top layer quality.
Well, honestly I'm not sure why anyone would need to hold chapstick anywhere but their pocket, however it appears there is a need for many different ways. LOL. Someone asked me to design this, and I did. I would suggest printing in a…
Reproduction of the Apprentice Pillar inside Rosslyn Chapel. Reduced polygon count so you can import it to Tinkercad. Category: Scans & Replicas
🇨🇭 Willkommen in der Schweiz Welcome to Switzerland! This model was designed by Daniel Muradás . The Kapellbrücke (literally, Chapel Bridge) crosses the river Reuss in Lucerne , central Switzerland. Built in 1365 , it is the oldest wooden…
This will hold a normal 16mm chapstick
I designed an alternative first layer box insert for the board game, Vampire: the Masquerade - Chapters. I made this with a few design goals in mind: Make setup & tear-down faster and easier Accommodate sleaved cards Organize the…
3 mignons Gnomes avec un chapeau sapin et une décoration différente dans les mains, 3 fichiers différents. Imprimez avec une hauteur de couche à 0.2 et 20% de remplissage. Vous pouvez les agrandir sans soucis. A mettre dans votre sapin,…
A holder for a tube of chapstick, baby.
Wife saw a tiktok and wanted a custom handle for her stanley cup that would hold her chapstick. Threw one together. Recommend to use PETG since it will likely get wet. Recommend to rotate it to lay flat on the print bed to avoid supports.…
An in OpenSCAD designed electronics organizing grid-box system. You can export a box of any size. All boxes are stackable. The outer size of a box is always a multiple of the size of the base unit (1x1x1). Have a look at the Github…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Build Your Own 3D Printed Gear Trains VIDEO: This is a modular 3D printable system designed to let you build your own gear trains and mechanical mechanisms using a collection of ready-to-print components. No CAD work is required. Choose…
Thelmo wanted a Chaplin, he was our project manager, we helped a little with the arms and the cane, the rest was all his work. #OttoRemixChallenge OTTO is for Thelmo, and for a lot of kids I've introduced OTTO to, much more than a robot.…
M-CHAT: MOLLE-Compatible Chapstick Holder for Adventure and Tactical use What it does and problem it solves: The compact and durable MOLLE ChapStick Holder securely accommodates a standard chapstick tube and attaches to MOLLE-compatible…
A holder for up to 4 lip balm/chap sticks that works with Gridfinity
NOTE: you will need some hardware to fully use this print I take my chapstick and my keys everywhere with me. If I forget my chapstick but remember my keys, I have a bummer of a day. If I forget my keys but remember my chapstick, my day…
Design holds the chapstick in firmly but still allows use of the adjustment knob and cap. If the chapstick wants to pull out when you remove the cap you can just wrap some tape around the chapstick tube about a millimeter from the…
Fits a start sized chapstick and is best printed in TPU with high infill. There is an additional file which has a keyring on the top lid. Model in picture on left 120% scale on right 100% scale There is a 120% scale in the files, this one…
This is a new exotic shot gun from Destiny the taken King. It’s obtained by the Jolly Holiday quest line. It features the reload mechanism as seen in the game. This is done with a sprint. It has holes through out for 4.8 diameter metal…
I wanted a Chapstick holder to place my tube onto my locker at work, so I don't waste time digging through my locker to find the right pants pocket with my Chapstick in it. I did not like the designs on thing verse, as many of them…
2 parts. Makes the printing process supportless. I chose to glue mine together but the mating surface is keyed so you don't have to glue them if you don't want to.
This is for the newer(rounder) style handle. Build in PETG. Depending on the brand of chapstick and label thickness, there may be some tearing or catching of the label. *The fit is tight, you will have to turn it 90 degrees and press onto…
Wife didn't like how her new Owala water bottle didn't have a way to attach her chapstick holder like her old water bottle. Printed out of TPU, thin gasket allows lid to screw on still, but also gives an attachment point for a keyring.
My girlfriend had several used lip balms that either had missing caps or loose cracked caps so I decided to revive them with some 3D printed replacement caps! The model is quite basic, just a hollowed cylinder with some fillets. This lip…
This is a model of a traditional czech christian chapel designed for FDM printing. For HO scale you have to print at 11,49 scale. Print instructions For HO scale you have to print at 11,49 scale.
Silueta de Charles Chaplin. Se puede imprimir en tres capas de diferente color. Decorativo.
An organizer for chapstick, lipstick, or similar items. Pictures are in rose gold, of course!
This 3d chappie has been modded for use on the Dummy13 figure. I haven't printed it at the original dummy 13 scale as it loses a lot of detail, but I have made it for a scaled up version (175- 400). I did use petg and supports. Drop a pic…
I made some 20mm (about .8 in) spheres to go in a gumball machine that we couldn't find store bought capsules for. The mechanism is inspired by the Snap Eggs by DaveMakesStuff, but is modeled it from scratch. You'll need to print two of…
Heart Shaped ChapCap Chapstick Keychain for Valentines Day As another entry into my ChapCap line (full line available here ), here we have a simple heart shaped keychain for holding your Chapstick. This would be great to attach to your…
(2) - 360 degree turns.....(33) - stairs..........No center support structure.....6" tall....this is the famous Loretto Chapel; the original version prior to the installation of a railing. Designed in Solidworks.
Gridfinity Chapstick Holder remixed with holes increased from 16mm to 16.5mm to hold Burt's Bees chapstick perfectly. The 3mf was created using Prusaslicer negative volume modifiers, so additional work might be required with using other…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I made a simple Chapstick and Vicks inhaler holder, there was some extra space so i added two more holes.
Mickey Mouse Ears ChapCap Chapstick Keychain This is another entry into my ChapCap Chapstick keychain series. This one looks like Mikey Ears for the Disney fans out there. This fits on a standard Chapstick, Blistex, or generic lip balm…
Base part is printed with 0.16mm layer height. I've printed it with tree support but i think standard support for touching baseplate only should be enough. Primarily for the entrance door. LED-Holder included. In case you want to…
Just an imitation chapstick...my toddler son was really into chapstick for a while, so I made this for him. It was also an early attempt at doing a scale/measured replica, etc. Printing it "cap" down makes for a better bottom (without…
The other piece is my chapstick stopper which you can also download from my page!
esqueleto robot tipo dummy13 y lucky13(dummy2) la diferencia entre ambos son las uniones de sus armaduras, ambos poseen mejoras en las uniones de hombro y piernas. puedes encontrar accesorios y armaduras en la siguiente coleccion…
This chapstick holder was a request from my wife who was tired of having these tubes rolling around in her bathroom draw
This is a simple clip-on holder for Chapstick or similar type lip balm sticks. For larger ones (such as Nivea) there is a larger diameter version "Nivea.stl". I tried some of the chapstick holders from here on Thingiverse for my wife, but…
So you have to pop out the medallions out of the print then; you have to glue the blank medallions I have created. like always follow i will follow you back ,and enjoy!
This one is works after printing! The original remixed model had separate ear blades that fit into the head, but the earholes where the earblades were supposed to fit were partially blocked off. (Of course, I figured this out after…
This is one of my first designs, and my first with threads. Holds one tube of chapstick perfectly. Print in PLA at .12mm resolution with 100% infill, and supports only touching buildplate, at 30 degrees.
Inspired by Pavel Rampas 's elegant Battery Holder Vase Mode , I designed a Lip Balm Holder for Chapstick or Burt's Bees brands to be printed in spiral vase mode. For Chapstick, please use Chapstick Lip Balm Holder STL due to its smaller…
Split this model to parts at 81.4 mm.
This model was created as a replacement due to the original being destroyed in shipping. You can watch the full process - including finishing - in the following video. Enjoy!
FREE RELEASE ❤ Check out the Patreon for additional Chonky Chaps and MORE! https://www.patreon.com/c/Salvadori3DArtworks Hey everyone! Say hello to Cupcake and Tentacus, the newest members of my 'Chonky Chaps' collection! 🐙✨ Cupcake is a…
This is a modern design tray to place your keys, wallet, and chapstick when you get home. The wallet and key slots are the same size and the chapstick slot is designed to fit most any standard sized chapstick. Circular divots added on the…
Gridfinity bin that holds 4 x chapsticks
Indiana Jones Chachapoyan Gold Fertility Idol Buddha
is cool ( i think u need supports oops I forgor to tell soonr :3)
I know there are a lot of variations out there already but i wanted to design something of my own. Introducing the Balmobile ! A chapstick,lip balm, pen, pencil, stylus holder for your car! Just use a double sided tape from auto zone or…
Simple holder for chap stick. Fits Blistex perfectly
🇨🇿 Welcome to Vlčice, Czechia! This model was designed by Skipper07 , a passionate 3D designer from Italy now living in Czechia, making a homage to his adoptive hometown in Southern Bohemia. MiniWorld3D is happy to bring this historical…
Les trois médaillons de la Saison 4 Chapitre 5 de Fortnite
IT Chapter One - Pennywise Stalking Georgie - 2017 3D printable model.
Fits on a standard water bottle cage mounts (2x M5 bolts spaced 64mm apart).
Make the outer walls thicker since you can see infill if you do not thicken the walls.
Interior parts to make a chapel car out of a Bachman G-Scale coach Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: SunLu PLA Category: Vehicles
Full write up coming soon Wiring Parts https://www.adafruit.com/product/3489 https://www.adafruit.com/product/1317 https://www.adafruit.com/product/3501 https://www.adafruit.com/product/1304 https://www.adafruit.com/product/3870…
Une simple equerre à chapeau avec le fichier freecad fourni pour une modification éventuelle
Totally new created for HO Scale (1:87) Chapel "Ulrichskapelle" - kleine Kapelle im Wegberger Wald (Germany) The chapel was build in the 17th ccentury and belonged to the castle "Tüschenbroich" Die Kapelle aus dem 17. Jahrhundert gehörte…
Clip-in holder for attaching your chapstick to your keyring. I designed it so that your lip balm can be used and adjusted while still on your keyring. Best printed in a horizontal orientation with supports for the key ring section. I used…
A chapstick holder that can be stuck on the wall of a nightstand with double sided tape. Printed with a skirt to help adhesion. Used for commonly shaped chapsticks such as Carmex (or any 15.92mm diameter objects).
Small chapstick dispenser for a few extra sticks.
it's a medallions in order to create these I had to use a lot of different shapes on Tinkercad in order to make these precise angles it took me a while but I finally got it
My day-hiking backpack doesn't have strap or waist pockets, so I designed a chapstick holder for the strap! NOTE: this is my first 3D design and am still learning! The model in the picture was printed at a width of 28mm, the .stl file is…
Holds your chapstick on your bag or keyring this worked on carmex and burts bees P.S. If you like my work check out more here! https://www.printables.com/@ATrain08_611047 printed at 20% in fill I printed with supports to keep the key loop…
Une femme avec un chapeau surmonté d'une rose. A l'intérieur du chapeau un trou pour laisser passer les tiges des fleurs. A imprimer à plat pour ne pas avoir de supports. Modèle en 3 parties : visage, socle et vase. Le visage est à coller…
A new 3D figurine generated by AI, a Chibi Charlie Chaplin. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
very nice easy to mmu colorize have fun
Une femme avec un chapeau surmonté d'une rose. Sur celui-ci, la rose est séparée du chapeau pour l'imprimer d'une autre couleur. A l'intérieur du chapeau un trou pour laisser passer les tiges des fleurs. A imprimer à plat pour ne pas…
Chapstick / Lip Balm Catch-All Tray I'm sure there are other small cylindrical things this will hold nicely :) Three model variations. I encourage you to remix/customized the blank ones!
Was a request from my brother. The concept was borrowed from the previous version but this was completely redrawn by me. The depth of the hole for the chapstick is 46mm and the magnet holes are for a 15mm x 2mm magnet. You will want to…
A remix ChapStickHopper by xSevilx on Thingiverse: https://www.thingiverse.com/thing:4862457. I added more capacity.
The BalmBuddy is designed to keep your chapstick handy and clean. Most designs out there replace the cap entirely, which puts the filament too close to the lip balm, which can get messy over time due to the layer lines. That didn’t sit…
have fun more buildings in this channel HIT username and modells
This Chapstick holder holds 9 Chapstick tubes for whenever you need to organize some Chapstick you may have laying around.
Needed to have my chapstick (EOS) handy by the couch.
Resident Evil Alice Series - Alice Charging in The Last Chapter
This is a remix of the Chappie bobble head. It has been scaled down and modded for use on the Dummy13 figure. I haven't printed it at the original dummy 13 scale but I have made it for a scaled up version (175). I did use petg and…
Recording Artists - Pop - Chappell Roan 3D printable model.
I received my copy of the Vampire the Masquerade: Chapters board game recently, and it's got a LOT of NPCs! The included storage has two spaces for those standees, but that's still 70+ standees that you need to search through to find the…
![Modular and stackable Electronics Organizer Box System inspired by Alexandre Chappel [last updated: 2022-11-18]](https://media.printables.com/media/prints/316542/images/2740154_e62e2c61-c96b-4608-9336-71ca6232e7ee/set_render.png)
