Counting matching models…
I've also included a presupported version. This should be helpful for determining if your printer is printing properly in the XYZ. When Measured each side should be 20mm
Einen Einbauadapter um den Schappach DC100 zum Zyklonsauger umzubauen , den Adapter in den Sauger innen einsetzen und am besten etwas mit Silikon oder Gummiunterlage unterfüttern damit keine Falschluft angesaugt wird , dann mit…
Just a vase/pot/planter/cachepot. Inside dimensions are 116mm(6,5in) wide and height (actually a little bit more, rounded down). Scale it as your needs, just make sure to have a solid watertight bottom. See all my designs on cults:…
Here was a fun project, a trombone mouthpiece with a mustache attached! In order to do this, I oriented the length of the mouthpiece level with the bed when printing and used a filament switch. It surprisingly didn't get in the way of…
1:100mm scale CHEP Pallet, with CHEP logo and wood grain. Obviously only available in Blue . I designed this in Tinkercad from the published schematics. The pictured pallet printed with Amazon basics silk PLA, was printed wood grain up,…
A sturdy cordless drill holder for almost all cordless drills (Makita, Bosch, Einhell, DeWalt, Ryobi, Black&Decker, Worx, Scheppach and many more). This holder will take any drill chuck with 43 mm outer diameter and a maximum length of 70…
I use the CHEP E-Leveler, and now the new E-Leveler2 device to level my Creality machines and recently added the Neptune 3 Max machine to my arsenal. Using the original G-Code files provided by CHEP, I modified the code to add all 6…
Anschlagwinkel für die Führungsschiene der Scheppach Tauchhandkreissäge. Anschlag 90° oder 45°, mit M6 Schraube und Mutter Fixierbar. Gedruckt auf einem FLSUN V400 ABS 255°/100° Infill 15% Gyroid Stützstrucktur aktiv
Just (yet another) a vase/pot/planter/cachepot. Inside dimensions are 102mm(4in) wide and 76mm(3in)height (actually a little bit more, rounded down). Scale it as your needs, just make sure to have a solid watertight bottom. See all my…
Scheppach Akku Halterung (MGT410) für das ordentliche Aufhängen von Akkus der Fima Scheppach sollte auch für Akkumodel: BA2.0-20ProS passen / Scheppach battery holder (MGT410) for neat hanging of batteries from the company Scheppach…
Chep calibration cube, 20 mm x 20 mm.
This is the holder to attach this awesome Featherboard to the Scheppach HS105 table saw, might also fit on other table saws
I stripped my oem gears and couldn't get replacementr parts so I just printed them. Made prototype out of PLA and it seems plenty strong. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2…
Spring board for the Scheppach table saw. As a suggestion I took feather-board-fur-bosch-gts-635-216. Everything else is redrawn and created. 2x M5x30mm screws and 2x M5 nuts are required for assembly. The screw head/nut must have a width…
A replacement insert for a Schepacht hs100s table saw. I made my final print in ABS and glued the two parts together with a small amount of aceton. You may need to add small supports to the screw insert and the top clip. The dovetail…
My friend broke the original handwheel for his SIP wood lathe and was distressed to discover from SIP that the part was unavailable. 3d printer to the rescue... I took measurements from the original wheel and made modifications to the…
osVac adapter for Scheppach HMS850 jointer & thickness planer. Thanks to https://www.thingiverse.com/tokenizer for the great Fusion 360 files! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No…
UPDATE 10.11.2023 Added a new model for other Einhell tools with grabs and integrated supports. Print this file if the tool is NOT the table saw Original description It turned out that JCB batteries fit almost perfectly the EInhell tools.…
What is a featherboard for a table saw? Essentially, it is a second pair of hands that provides better grip and accurate cuts . Fastened to the tabletop or fence a featherboard ensures that the wood is safely and effectively hold and fed…
Der Tischeinsatz für Sägeblatt der HS115 von Scheppach ist sehr instabil. Ich habe ein stabileres Teil konstruiert und das bestehende dadurch ersetzt. Jetzt ist die Auflage Fäche stabiler und es ist möglich auch schmale Streifen zu Sägen…
Update 25Nov22 I've uploaded Version 3 of the zero clearance & 6mm Chamfered Slot inserts, which are stronger again than version 2, with more reinforcing ribs. I now print these in ASA, which seems more resilient than PETG or PLA and I've…
A dust cover for the Scheppach CS-55 track saw. My guess is that it should also work for the Aldi Workzone and any other track saw that looks similar. Printed at 100% it fits fine, and fairly easy to remove. Printed at 101% (may have to…
Adapter für den Abricht- Dickenhobel. Ich verwende diesen mit einem Festool 36mm Schlauch. Die Muffe ist ca. Ø45mm
perfectly and tightly fit into slot for Scheppach table saw hs100. I think that is useable for other scheppach saws. rail is a smaller higher for better movement of sled. for better move of sled I suggest to use some oil. fe. small amount…
Just a standard 1165 x 1165 x 150mm Australian pallet. Import into your favorite slicer and then reduce the model size. 5% works perfectly if you are printing a pallet for your Bunnings/Hammerbarn forklift model. Printed pretty well on a…
Ein Absaugadapter gebogen fuer eine Scheppach Dekupiersaege von Innen 35,2 mm auf Aussen 40 mm.
On the Scheppach DC100 the inlet blows straight onto the motor assembly and clogs up the filter. I wanted to change the direction of the inflowing air to get some cycloidal action going. Angling the 100mm hose would require a much bigger…
Guide rail holder for the Festool MFT system for the Scheppach guide rails, which should also work for the Festool rails. Used this construction for my Scheppach Battery Saw PL55Li are required additionally: 1x M8 HEX screw 80mm 1x M8 nut…
Air filter for Scheppach compressor, M16 thread.
Adapter to connect a HT Pipe DN 50 to Scheppach DC 100 (Parkside PASA 1200) or similar. Prints without support.
osVac adapter for Scheppach HS105 table saw. 2022-01-28 Update: I have added the Fusion 360 files, but please note, I am a beginner in Fusion 360 and still learning ;) I am always open and thankful for tips and improvement suggestions or…
This cachepot prints quickly in vase mode and is fully parametric to fit perfectly into any size pot. Includes drainage holes. Printed in vase mode with 0.20mm layer height, 4 bottom layers.
Thank you for the inspiration! changed the dimensions a little the upper rim is narrower more and smaller brackets printed in PETG with 0.6 nozzle and 0.2 mm layer height
I made this model for my new grinding machine, the Scheppach BTS 900. This adapter is good for the Scheppach BTS 900 or other tools who have a dust collector connector with an outer diameter of 61,8mm. The Vacuum cleaner should have an…
Das Teil beseitigt ein grundsätzliches Problem dieses ansonsten perfekten Bandschleifers. Trotz eingeschalteter Absaugung werden bei weitem nicht alle Späne abgesaugt. Damit ist jetzt Schluss :-) Der Staubschutz wird einfach auf den…
designed this for my HSW. just needed a holder for the scheppach wrench. i added the insert to the model since i dont prefer the screw inserts
Printed with the following paramters: PLA 0.2mm layer height 4 Perimter Shells first 12mm solid to get a good grip on the nut This knob is for M8 bolts and can fit an ISO M8 nut (13mm wrench). The knob design origions from a knob…
Adapter connecting Kärcher MV2 with Scheppach BTS800.
Einfacher schneller Adapter um an einen DC100 von Scheppach, ein HT Rohr anzuschließen, da mich auf meinem YT Channel jemand danach fragte. Ich habe es anders gelöst, deshalb nicht gedruckt. Sollte aber passen. Ansonsten die Parameter in…
This "thing" is all about presenting those CHEP cubes. You know what a CHEP cube is if you follow Chuck Hellebuyck on his Filament Friday YouTube channel (FilamentFriday.com). Chuck also has a very helpful website "CHEP Club"…
Vacuum adapter for the BOSCH GAS35 for the Scheppach HMS860
Ersatzteil Lüfterrad für Scheppach Wippkreissäge WKS7000 evt den Sitz für die Welle mit einer Feile etwas nachbearbeiten
This sleek vase embodies contemporary design in its purest form. Following the "less is more" principle, every curve and line serves a purpose, creating a piece that's both functional and aesthetically striking. Design Features: Clean…
Adapter, Absaugung Scheppach Band und Tellerschleifer auf Bosch Tischkreissäge Anschluss
This Adapter screws in place of the original inlet with the original screws and without any other modifications necessary. It provides a decent cyclone effect to reduce clogging of the filter. Additionally it reduces the inlet to fit…
240218 Poop scoop for the pet cage, 寵物籠用便便勺, पलत जनवर क पजर क लए पप सकप The rabbit came to visit for a week or so. The cage has to be cleaned for the smell. I found a poop scoop on thingiverse. It was a little bit small. So after 3…
vyplň 100% podpory nie
This guide rail base is designed for the Milwaukee M18 CCS55‑0 circular saw, enabling the saw to operate similarly to a plunge saw when paired with a Scheppach guide rail. The Scheppach rail is a cost‑effective alternative to other rail…
Scheppach BASA1 : https://www.amazon.de/gp/product/B00DOYWJZS/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=armin0f-21&creative=6742&linkCode=as2&creativeASIN=B00DOYWJZS&linkId=3e0c2a93048ce705431fb236b986f110 My Creality CR-10S :…
Made this adapter for my Scheppach DC100 dust collector to connect shop vac hose. Fits standard shop vac hose. Printed in PETG with standard settings. 0.2mm layer height.
English The HBS 32 vario band saw from Scheppach has a round plastic table insert. This naturally wears out during normal operation. Fortunately, some spare parts are still available for this old machine from the early 1990s. Parts such…
This is a Tormek LA-122 honing disc holder that fits instead of the normal honing wheel of the Scheppach 2000s. Parts has been oriented in the proper direction for printing. Only the outer part of the inner retaining ring for the big…
Ersatzteil für eine gebrochene Scheppach DG-10 Druckluftdüse. Herausforderung war das M10x1 Gewinde….. Konstruiert mit FreeCAD LinkBranch von Realthunder. Gedruckt in Prusament PET-G in 0,1mm Layer-Höhe (dann passt das Gewinde besser)
Wir haben seit ca. Zwei Jahre sind diese Absauganlage her und sind eigentlich sehr zufrieden. Was stört, ist, dass die Späne und der Staub sofort vom Rohr in Richtung Saugmotor mit den Filtern fliegen. @Angeregt durch ein Video, wo ein…
This is a adapter for the Bosch GTS 10XC and the Scheppach DC 500 sunction system. Printed in PLA
Inspired only by the fact that the delivery did not happen without damage to the shipment. The original has completely straight blades and just blows air around and doesn't cool the engine too much. This version is quick without…
STLs available for 3" and 4" slotted orchid pots. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: PLA
My friend asked me to model and print a replacement throat plate for her Scheppach Prima HBS 32 Vario band saw, as it chopped up the original over the years. Printed on the Creality CR-10 in Colorfabb nGen. bandsaw lintzaag bandsäge…
The original depth stop which came with this drill press was flimsy and broke on first use. I found a depth stop on thingiverse but with slightly different dimensions. I decided to build one from scratch using design inspiration from the…
This optimized dust extraction nozzle for the Scheppach BTS900 focuses the full suction power directly on the sanding belt — exactly where most sanding dust is generated. The nozzle simply slides onto the original dust outlet and connects…
I´ve printed it with PETg and -0.15 Horizontal Expansion. Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0,2mm Infill: 40% Filament material: PETg
Um die Scheppach als “Handkreissäge” mit Führungsschiene verwenden zu können, kann der Scheppach-Tiefenanschlag durch diesen ersetzt werden. Im Teil ist eine kleine Stützstruktur modelliert, die nach dem Druck entfernt werden muss. Ebenso…
Hatchepsout — Buste 🇫🇷 Description (Français) Ce buste représente Hatchepsout, l’une des rares femmes à avoir régné en tant que pharaon dans l’Égypte antique durant la XVIIIᵉ dynastie (vers 1479–1458 av. J.-C.). Son règne fut marqué par…
The design uses M3 hardware. The m3 nuts are press fitted in the clips. There's some play in the body attachment hole to fix any misalignment. The caliper is placed so that it clears the transmission at the top of the drill and handle…
Absaugadabter auf 35mm Scheppach BASA1 : https://amzn.to/2JsCbQE My Creality CR-10S : https://amzn.to/2VCkCiy My Creality Ender 3 : https://amzn.to/2WeIUDI Link for PLA : https://amzn.to/2EhJN44 Link for TPU : https://amzn.to/2Ek6ftt Link…
For my Scheppach OSM600 I needed a special angled adapter to fit in the corner of my shop. Therefore I designed a hose adapter which fits on one side on the maschine and on the other to a standard DN50 / HT50 or 50mm Hose. Print without…
improving the safety of the circular saw, where it is easily turned off with the knee without looking for the switch in the forward body bend. Material PLA
Sadly no better Images at the moment. But if you own the Machine you will know what it is for. Links to the other Models you need: https://www.printables.com/de/model/338478-flexible-hose-link-fusion-360…
I needed an adapter to connect my Scheppach BTS900 to my shop vacuum system. This hose adapter is able to connect to a 50 mm ID tube directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No…
Das passt in den unteren Kragen vom Fass, ich habe die Füße noch mit Doppelklebeband am Boden befestigt und Filzplättchen drunter geklebt.
Hello, I made a remodelling of Scheppach Akku Halterung https://www.printables.com/model/445374-scheppach-akku-halterung-mgt410-scheppach-accuhold by redaeq. It is now compatible with the new 20V IXES series of Scheppach Accumulators. It…
I needed an adapter to connect my Scheppach HBS261 to my shop vacuum system. This hose adapter is able to connect to a 50 mm ID tube directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No…
eplacement compressor impeller/fan for Scheppach HC 24. Shaft diameter 17 mm, outer diameter 102 mm. Includes STL for printing and STEP for editing. Description This model is a replacement impeller / fan designed for the Scheppach HC 24…
This 2x2 gridfinity Cachepot-style planter is designed to be an aesthetically pleasing and functional way to grow plants on a gridfinity baseplate. The system is comprised of two parts: a 2x2x10u cachepot, and a 2u high insert. The insert…
Scheppach cordless tools holder for wall. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 30 Filament: Gembird PLA Category: Tool Holders & Boxes
An elbow adapter/dust collector to plug a vacuum cleaner to the Scheppach belt/disc sander.
Scheppach DP18 Vario Bohrtischbefestigung Zum befestigen einer Holzplatte o.ä an der DP18 Vario. Installation: Prüfen ob die Grundkoerper durch die Langlöcher des Bohrtisches passen. Falls nein bitte die Kanten der Langlöcher mit einer…
The inexpensive Scheppach workshop vacuum comes with a cheap, sad, thin hose. To use the vacuum's full capacity, a wider hose can do a lot of good. This adapter allows you to put a serious 60mm hose to use on your Scheppach ASP-30-*.…
FreeCAD Made this replacement with FreeCAD. Feel free to use the freecad source file for other sizes. Most dimensions are varset based. The model has print in place dove tails and can be assembled without tools. collection: CAD exercise…
Simple hose adapter for my bandsaw Scheppach BASA1. Thanks, Enjoy! Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Doesn't Matter How I Designed This I designed this with Tinkercad and it was the first time that worked…
Höhenverstellung für ATIKA BS 205-2 // Scheppach HBS 20 hight adjustment for ATIKA BS 205-2 // Scheppach HBS 20
An adapter to connect my table saw vacuum pipe to my shop-vac
This is a T-nut for attaching things like featherboards to a Scheppach HF series table router (and similar models). You need an M6 screw to drive through and a matching nut. Consider printing a handle for the nut, there are plenty…
Einfache Befestigung für einen Kunstoff Messschieber gekauft beim Großen A. Befestigung mit M4 Schrauben an der Spindel und am Messschieber, optional mit M4 Einschmelzmuttern ansonsten längere Schrauben. Der Messchieber selbst ist mit…
Hi, Wochenende… Der Dickenhobel hatte ein bisschen zu kauen… Keine Zeit um auf das Ersatzteil zu warten (falls es dieses überhaupt noch gibt)…
Scheppach DP18 Vario Tiefenmesser Benötigt wird: Tiefenmesser Digital (günstiges Chinateil) Messschieber (kann gerne defekt sein. Es wird nur das Innenteil siehe Foto gebraucht) 1x M5x18 + Thread Insert (Optional Mutter einschmelzen und…
Print it with PETG 100% infill Dimensions: 60x4x3 mm outter layer I hope it will help with your problem
An additional flap on the stop button increases safety when working with the saw. The axle is made of a 2.5 mm diameter blind rivet pin, cut to the appropriate length of 41 mm. After installation, the flap should fall freely. For axles…
It was annoying that Scheppach didn't design one to begin with so here we go. Printed in PLA with 0.2 mm layer height on a Prusa Mk4. The support material was a bit tricky to get out but it's possible. You will have to cut a hole in the…
The clamps that come with the Scheppach track saw rail are a threaded type and I thought these Quick Grip clamps would be more convenient. Believe that the Scheppach tracks are different to Festool and Makita. Assembly: Remove the…
I took my MustachePiece and added some hair! After looking at how the famous hairy lion ( https://www.thingiverse.com/thing:2007221 ) model worked, I took inspiration and made a new version of my design. Print Settings Printer Brand:…
This is a simple mount to attach a 250V 12A softstart modul KR-009 or the 16A ZLB to a Scheppach mitre saw HM90SL without making any permanent changes to the saw. Just unscrew one screw that holds the bladecover, add the mount and…
Printed with 50% infill on Ender 3 original in PLA. If you need to make updates feel free to send a message, as i am happy to share the Fusion Modell as well.
Cogged Rack For Scheppach HS100S Table Taw (Angle Adjustment) part number 108: media.pdf
Router table insert plate for Scheppach HF50 Ø12mm, Ø22mm, Ø47mm Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20 Filament: any PLA - Category: Machine Tools
To prevent the mount from breaking again, I increased the outer diameter to improve stability. Part list: spare part cylinder head screw M5x30 | quantity: 1 hexagon nut M5 | quantity: 1 Print instruction: material: PETG or similar…
The original guide rail adjustment screws are too small when using the Bosch FSN70, the saw wobbles on the rail. I redesigned the screws with Freecad so that the saw can also be used on the FSN70 without play.
Cover of the saw blade hole went missing. Made a new one. PLA, 50% infill. How I Designed This Just took a picture of the hole. Used it as decal. Then measured the diameter and scaled everything accordingly. I first made a prototy to to…
