Search results: cho

Sort order

Counting matching models…

P
PrintablesEric Cardinal

Drywall Anchor

Drywall anchor, easy to print

Downloads
5,131
Likes
877
Rating
4.9
P
Printables3DVJ Models

ChooChoo - A Lightweight/Support Free 4 Tone Train Whistle v3.1

Four-tone train whistle here! This model is composed of two simple parts and are both support free. Included is also a stand to show off your whistle, and you guessed it, it holds both versions! **Stand Update v3.1** - Split stands into…

Downloads
2,922
Likes
836
Rating
4.95
P
Printablesfifindr

Snack Finger Chopsticks

Enjoy snacking while keeping your hands clean with the Snack Finger Chopsticks ! Perfect for gaming, working, or just enjoying your favorite snacks without the mess. These lightweight, ergonomic chopsticks allow you to grab chips,…

Downloads
2,806
Likes
816
Rating
4.97
P
PrintablesMrViddy

Chopstick Cheaters Helpers Trainers

Inspired by the design from FUN CHOP chopstick helpers. Great for rounded chop sticks as well. Recommend Print in PETG for flex and strength. Recommend 100% Infill FunChop chopstick Helpers (Amazon Link⬇) https://a.co/d/1i6oWUr

Downloads
2,440
Likes
460
Rating
4.95
P
PrintablesSKFproject.com

Amazo Alexa Echo Dot Support

Supporto a parete per Amazon Alexa Echo Dot

Downloads
967
Likes
102
Rating
4.75
P
PrintablesWalde

School Desk / Schultisch (Playmobil kompatibel)

English A school desk in Playmobil style. Printing guide Printable without supports with default settings. My own settings are visible in the project file (3 tables were printed in the project). The project file is ment as an example.…

Downloads
511
Likes
49
Rating
5
P
PrintablesAsphalt3D

Minimal Chopstick Cuff Holder and Rest

Hold your chopsticks together until it's time to eat, then keep your table clean with this dual-purpose chopstick cuff holder and rest. Add a touch of elegance to a dinner party or just prevent losing your chopsticks during a meal on the…

Downloads
484
Likes
189
Rating
4.73
P
PrintablesPeter Farell

Saint Scholastica : Bas-Relief Plaques

Saint Scholastica : Bas-Relief : two versions. The version on the left seems to need some widening while the version on the right could use some tightening up. I was experimenting with some detail manipulation and noticed the distortion…

Downloads
311
Likes
73
Rating
5
P
Printablessspico

Speaker cover 140 mm choose your own design - with holders for car speakers

Hello there! As I was upgrading my manufacturer sound system in my BMW E46 I noticed the original speaker covers killed a lot of the sound. After some research speaker covers with honeycomb design turned out as a good choice, as its…

Downloads
271
Likes
17
Rating
0
P
PrintablesLee

Chocobo Chick Benchmark

I wanted a benchmark for testing different filaments. However, I wanted something I would appreciate a collection of. I don't care to have a fleet of Benchys or an army of Martians. These cute and nostalgic poltry are right up my ally.…

Downloads
268
Likes
36
Rating
5
P
PrintablesBwabyPrints

Hueforge Choso 2D Art

Hello! Here is my first attempt at using HueForge for creating 2d art pieces. I used a panel from the manga to make this piece. Use the following settings for best printing: Print at 0.08mm layer height, first layer 0.16mm, 100% infill.…

Downloads
230
Likes
51
Rating
5
P
PrintablesPeter Farell

El Macho

El Macho from Despicable Me

Downloads
228
Likes
42
Rating
5
P
PrintablesPC2CV

Amazon Echo Dot 3rd Generation wall holder

This is a holder for the amazon alexa 3rd generation, to hold it using the UK plug that comes with it. There is space behind the alexa to hold the power cable Supports are required, i used the tree supports which were easy to break off,…

Downloads
205
Likes
16
Rating
5
P
PrintablesSdewe

Chock for furniture

Einfache unterlegkeile für Möbel, um schiefe Böden auszugleichen. In den höhen 5, 7 und 10 Millimeter Simple chocks for furniture to compensate for sloping floors in the heights 5, 7 and 10 Millimetres

Downloads
170
Likes
10
Rating
0
P
Printablescraigprestidge

River Topography - 3D Model, perfect for school projects on rivers

When designing a 3D-printed river model, remember that rivers increase in size and volume as they flow from their source to their mouth. They always flow downhill due to gravity, taking the path of least resistance. This causes rivers to…

Downloads
152
Likes
13
Rating
0
P
PrintablesAdam

Furniture wall anchor

This wall anchor helps you to attach your furniture to the wall to keep it in the right position. Important note: this is not intended to be a safety device. Note: the cover photo is upside down to better show how it works. Design…

Downloads
121
Likes
43
Rating
5
P
Printablesbkerler

Valentine Heart Gift / Chocolate Box

This is a valentine gift box in form of an heart for chocolate or other gifts. Best print in PETG (Red carmine for example) or PLA Print with 0.40mm nozzle, 0.2 structural profile, 15% infill and paint-on supports, for support enforcers…

Downloads
107
Likes
27
Rating
0
P
PrintablesMichael-5072

RoboChop mit Beleuchtung

Ich habe diesen kleinen Roboter als kleine Lampe für den Schreibtisch und als Gadget designt. Der Roboter hat im Innenraum Platz für eine Knopfzellenbatterie und kann drei farbige Dioden aufnehmen. Im Kopf befindet sich eine Aussparung,…

Downloads
71
Likes
24
Rating
0
P
PrintablesPetr Hauser

Karcher WD3 zajišťovací klíč na vzduchový filtr / Karcher WD3 lock key airfilter

Karcher WD3 zajišťovací klíč navzduchový filtr / Karcher WD3 lock key airfilter Sliced for MK4

Downloads
68
Likes
6
Rating
0
P
PrintablesPetr

průchodka vlasce žaluzie

Průchodka vlasce proti jeho předření přes plechování žaluzie

Downloads
54
Likes
5
Rating
0
P
PrintablesSzymon

School Test Helper (The right answer pencil-chooser) A-B-C, A-B-C-D, A-B-C-D-E

May I present you pencil fidget toy, which can help you in fast choosing random answer on tests. There are 3 versions of this fidget toy, which helps to choose answer from 3-4-5 answer choice tests. Printed on Prusa mini with 0.1 mm layer…

Downloads
52
Likes
9
Rating
0
P
PrintablesAdam

Wall anchor for Umbra Twilight curtain rod

This is a wall anchor for an Umbra Twilight curtain rod (tested on the Double Blackout version) with wider 32 mm spacing between the screws. Design features This is designed to fit into the slot on the curtain rod where the manufacturer's…

Downloads
43
Likes
4
Rating
5
P
PrintablesPekenis

Mosquito net hook | Gancho mosquitera

Pieza de repuesto para gancho de mosquitera. Print settings for my Kobra 2 Neo: Layer height: 0.1 Print velocity: 10mm/s or 20mm/s

Downloads
43
Likes
2
Rating
0
P
PrintablesYamiGhor

Phone Round Japanese Lamp (Chochin)

A Japanese rounded lamp called Chochin for your mobile flash. It's mini, it's fragile like paper, draws a symbol on the ceiling and it's japanese inspired! This one projects the kanji fire on the ceilling. RECOMENDATIONS I used supports…

Downloads
42
Likes
11
Rating
0
P
PrintablesHighTechRedNeck

Violin hanger without screws/anchors

In our case we already had a secure nail in the wall where my wife wanted to hang her violin, and did not want to drive two screws or anchors into the sheetrock. I would recommend ensuring that the nail you use is directly into a wall…

Downloads
39
Likes
4
Rating
0
P
PrintablesPapyjo

Cabochon Peugeot enjoliveur roue

Enjoliver un enjoliveur ;-) de roue tôle avec un logo blanc et noir collé au centre de celui-ci

Downloads
31
Likes
3
Rating
0
P
PrintablesRhanson

Echo Tank Squad

Squad of Tanks for your gaming needs. Size as needed, will need supports for the underside and gun barrels. Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** Doesn't Matter Supports: Yes **Infill:** 15 Notes: These are…

Downloads
29
Likes
3
Rating
0
P
PrintablesOlivier Boesch

Bouchon de liquide de rinçage Lave vaisselle

Fabriqué pour un Lave vaiselle Indesit DFG254BSFR. Peut convenir à d'autres modèles

Downloads
29
Likes
3
Rating
0
P
Printablestully

Chopper Blade Storage Box

My wife received this vegetable chopper as a gift (it was purchased on amazon.com ). The blades are wonderfully sharp which is great for chopping, but there is no good storage solution for the blades when not in use. I designed this to…

Downloads
25
Likes
11
Rating
0
P
PrintablesDavid Vrána

Pendant: School in nature (Škola v přírodě) 2022 CZ

This pendant was created for the school trip like a remembrance mark.

Downloads
22
Likes
1
Rating
0
P
PrintablesDarkcoucou

CF5135B-Z/CF5135C-Z Tachometer Display Box W/ Battery

These are parts used to make a powered Tachometer display box for a small Lathe or Milling machine and mount the connected sensor to a OPTImill BF16 Vario Milling machine via either an Replacement Cap cover part or a bracket. Two…

Downloads
20
Likes
1
Rating
0
P
PrintablesChristian Maier

Schonbacken Schraubstock 125mm magnetisch

Magnete 10mm Durchmesser und 3mm Höhe.

Downloads
18
Likes
2
Rating
0
P
PrintablesTransBat

Count Chocula Inspired Mini Dracula Remix

Inspired by @3DPrinty Sculptember models, I present this recolored homage to my favorite line of 1980's Monster Cereals -Count Chocula There are no alterations to the original model - this is simply a recolor/remix using PrusaSlicer's…

Downloads
14
Likes
3
Rating
0
P
PrintablesGCHS Robotics

Garden City Highschool 3D Printed Bridge to Transplant Heart BESTRobotics2023

Contact Name: Robert Smith, [email protected] School: Garden City High School BEST Hub: Kansas BEST How It Works Our bridge to transplant heart works by two screws (in black) being driven either two or one motor (stand-ins marked…

Downloads
14
Likes
4
Rating
0
P
PrintablesKtowns

Love School for any educator

Give this to a teacher, principal or anyone at the school that you want to show your appreciation too. Let them know you truly appreciate all they do to help you or your child learn everything they need to in order to become successful!…

Downloads
14
Likes
0
Rating
0
P
PrintablesJKU STEAM Lab

3D Modeling of the School Building with TinkerCAD

Students design and 3D print their school building in TinkerCAD, learning math, measurement, and modeling through teamwork and the Blum & Leiss cycle. A hands-on STEAM learning project!

Downloads
13
Likes
13
Rating
0
P
PrintablesTiggermanScrat

COIN - Make a Choice

Print the coins separately and then glue together. Flip to pick your candidate. As good of a method as any. lol Printed flat without supports on an Ender 3 V3 SE. 2.5hrs total. Printed each separately in its own color PLA, 0.2 layer, 210C…

Downloads
12
Likes
1
Rating
0
P
PrintablesCLOONEYc

J Hook for Echo Strength Metal PegBoard

This is a J Hook model created to fit my square metal pegboard inserts for the Echo Strength Smith+Cable equipment. The initial model I believe should fit 5/8'' inch holes, but I had to downsize my scale in PRUSA SLICER to scale at 66% to…

Downloads
12
Likes
3
Rating
0
P
PrintablesCutmayon

bouchon vis frigo camping car

Bonjour, Ce sont les caches des trous des 4 vis de fixation de mon frigo dans mon camping car. Le camping car est un Rapido et le frigo est un Electrolux RM 4230. largeur extérieure 20mm, largeur axe 9.5mm Belle journée. MC

Downloads
11
Likes
0
Rating
0
P
PrintablesStartrekfan2

Choral sheet music holder

The assembled unit is an insert in music folders. It is used to hold and organize original sheet music for singers in choirs. The sheet music holder is made up of two parts which can easily be printed on a small print bed. They fit…

Downloads
9
Likes
4
Rating
0

Honda ATV Choke cable Insertable Nut (Under choke puller on handlebar)

Stripped nut replacement for Honda ATV Choke cable Nut (Under choke puller on handlebar). Insertable nut, to avoid having to remove the whole choke cable. You can also insert the small threaded part an glue it to make the nut complete. V1…

Downloads
8
Likes
1
Rating
0
P
PrintablesViktor Vaško

Prechodka cez sklenenny stol

Služi na ochrtanu vnutorneho kruhu v stole

Downloads
8
Likes
0
Rating
0
P
PrintablesJACOPO PIANEZZA

School kit for children affected by Special Educational Needs and Disabilities (SEND).

TOOLS AND MATERIALS FDM 3D Printer — PLA for structural prototypes, Rhino for component modeling magnets for the ruler: https://amzn.eu/d/01X3o13M scissors: https://amzn.eu/d/0eC7QDmE Steps to Create the Kit : Step 1: 3D Print the Kit…

Downloads
8
Likes
1
Rating
0
P
PrintablesVSVlab

Manche et capuchon pour lame Stanley 0 11 221

FR Manche compacte qui sera utilisé dans une création à venir Notice 1 posez la lame dans la partie creuse du manche. 2 Clipsez la lame dans la partie creuse en appuyant fortement avec un tournevis 3 Clipsez la seconde partie du manche et…

Downloads
8
Likes
3
Rating
0
P
PrintablesStigern

Yawning Chonk Cat

Meet the Yawning Chonk Cat – a gloriously plump feline caught in the middle of a luxurious stretch and an epic yawn. This chunky masterpiece oozes laziness, sass, and undeniable charm. Whether it’s for your shelf, desk, or just to make…

Downloads
15,160
Likes
2,141
Rating
4.9
P
Printablescalvindonger

Finger Chopsticks

Hi everyone this is a finger chopstick I made. It has offset teeth for better grip of small objects.

Downloads
11,853
Likes
1,192
Rating
4.95
P
PrintablesJosé Pedro

Knitted Heart: Cute, Chonky and Puffy

These chubby, puffy hearts are designed to look like they’re knitted , but they’re fully 3D printable . They come out with a soft, “stitched” texture that looks great in Valentine colors (red/pink/pastel), gift sets, desk decor, or just…

Downloads
9,684
Likes
1,431
Rating
5
P
PrintablesStigern

Chonky Zen Frog

Chonky Zen Frog – Enlightenment Has Never Been This Chunky 🧘🐸 Take a deep breath… and let the serenity of this plump, peaceful frog wash over your print bed. Meet the Chonky Zen Frog , a delightfully rotund amphibian who has mastered the…

Downloads
8,440
Likes
1,069
Rating
4.96
P
Printables3dgeprintnl

Chonky Highland Cow – Shaggy Horned Cutie

Meet the ultimate “Highland Cow” : big horns, bigger fluff, and a fringe so long it’s practically a privacy policy. This chunky, seated Highland cow is sculpted with flowing fur, a boopable snoot, and soft, rounded hooves—perfect as…

Downloads
6,730
Likes
990
Rating
4.92
P
PrintablesReviloRedab

Chopstick Cheaters (not just) for the kids

ChopstickCheaters to let your kids eat with chopsticks. Easy and fast print and a lot of fun! V2 now prints with no supports. Use PETG to be able to put them in the dishwasher. PLA works fine but may not stand the heat. Made for…

Downloads
6,647
Likes
2,900
Rating
4.84
P
Printablesh3li0

echo · planter

echo · planter modern minimalist planter design with pattern that sits elevated on the plate · includes wrap-around or traditional style plate update · you can now find also the echo · vase , which is a great companion piece full…

Downloads
6,401
Likes
2,078
Rating
4.98
P
PrintablesAllpa

KYLIE - Xtreme Strong Wheel Chock // KYLIE - Sehr stabiler Radkeil

Very stable wheel wedge for securing parked cars and trailers. The wedge prevents the unintentional rolling away of vehicles, trailers, motor homes and caravans. Due to its design and structure, it holds particularly well. Nevertheless,…

Downloads
5,610
Likes
1,862
Rating
5
P
PrintablesStigern

Chill Chonky Cat

Chill Chonky Cat Meet Chonky Cat , the purrfectly plump companion you didn’t know you needed! With its oversized belly, tiny paws, and huge expressive eyes, this adorable creature is guaranteed to bring a smile to anyone’s face. Whether…

Downloads
4,555
Likes
981
Rating
4.9
P
PrintablesStigern

Lord Chonkington

Behold the majestic loaf, the feline monarch of indifference, the absolute unit: Lord Chonkington the Unimpressed. This hilariously rotund kitty is equal parts adorable and apathetic, with more rolls than a bakery and a gaze that silently…

Downloads
3,589
Likes
653
Rating
5
P
PrintablesBalulo3Dmaker

chinese chopsticks clip

A simple yet elegant chopstick clip. Keeps chopsticks aligned and secure before, during, and after use. A discreet acces

Downloads
3,481
Likes
1,254
Rating
4.63
P
PrintablesJeff Lundstrom

Alexa Echo Dot (4th Gen) T800

Original file creator Geoffro https://www.thingiverse.com/thing:4858011 Just some cutting on the Terminator T800 head to allow you to fit the Alex Echo dot (small ball not the large one) 4th gen ball in the model. Thought it was cool and…

Downloads
3,420
Likes
408
Rating
4.67
P
PrintablesDL

Echo Dot 4 Stand Alexa Mount Hippo, NEW divided version for easier printing

Stand for Alexa Echo Dot 4 For the standard version you need support under the belly and the head. Because you could still see, where the support was, I redesigned the model. The divided model only has support on the “inside”, where the…

Downloads
3,340
Likes
524
Rating
4.77
P
PrintablesRasor

Screen Accurate R2D2 Alexa Echo Dot 3 Dock

I'll be honest, I didn't like some of the current cut and paste versions of the R2D2 Alexa Echo Dot 3 docks available, some of them had a lot of errors when slicing. I decided to make a "as close as possible" screen-accurate version from…

Downloads
3,231
Likes
590
Rating
4.57

Flashforge Adventurer 5M (AD5M) Nozzles Box and Accessories Box - two styles to choose from, including sets that attach to back of printer v1.2

VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…

Downloads
3,114
Likes
387
Rating
4.95
P
PrintablesTennessee Mats

Threaded Drywall Anchor

Anchor that screws into drywall, with internal thread for 8-32 bolt. Simply drill a ¼" hole in your drywall and turn the anchor in with a Phillip's screwdriver until the end is flush with the drywall. The threads in the center hole accept…

Downloads
3,071
Likes
732
Rating
4.78
P
PrintablesMarkus

Finger Chopsticks - Stick to the finger mod

I like the Finger Chopsticks from @MrDaedelus but they often slip from my fingers. It's also not possible to strech the chopsticks so i made a modded version. Normal: Diameter of the finger rings is around 22mm or 0.9 Wurstfinger. Small:…

Downloads
3,042
Likes
246
Rating
4.76
P
PrintablesMichael

Chopsticks Clamp

I saw something like this at a restaurant and was able to make a similiar item for use at home. The print works well out of PLA filament and the fun colors are great for kids. Print time is about 8 minutes Of all the utensil holders I've…

Downloads
3,006
Likes
953
Rating
4.7
P
Printablesh3li0

echo · vase

echo · vase modern minimalist vase design in two options, full size and 75% in spiral vase mode for the mini, it's the perfect companion to the echo · planter dimensions in mm: standard ~ x: 147 · y: 147 · z: 220 mini · 75% ~ x: 110 · y:…

Downloads
2,981
Likes
749
Rating
4.92

Chomper (Plants Vs Zombies)

Watch the full video here to see how we created this: https://youtu.be/TwzH-t81MFw It's finally time to add Chomper to my list of Plants Vs Zombies characters on my shelf. I modeled Chomper in ZBrush. I mostly used Booleans for the head.…

Downloads
2,952
Likes
371
Rating
4.91

Drag Chain for CNC, two-piece, snap-open, 64mm radius, choose from two sizes: A=20x40mm, B=dual tracks, 20x26mm each (v1.14)

UPDATE April 23-24, 2024 — Remodeled how the retainer clip is attached, to get better grip strength. This involved a remix of both the chain link and the clip. Version 1.14 and up has this. Also, added two new sets. Original was renamed…

Downloads
2,856
Likes
336
Rating
4.91
P
PrintablesMake a Thing

Basic Wheel Chock

Wheel Chock for car. Should work for most car tires, not recommended for truck tyres. No supports required. Recommended to print at 0.35mm, resolution is not really important. Do not use this for safety.

Downloads
2,620
Likes
754
Rating
5
P
PrintablesJM3D

BETTER DRYWALL ANCHOR

MY NEW DRYWALL ANCHOR INSPIRED BY https://paulbhardware.com/snapskru-drywall-anchor-8x1-1-2-snap30011 I ADDED A BIT TIP TO IT AND IT IS ALSO DESIGNED TO HAVE A WIDER OUTER RING TO MAKE FOR A TIGHTER FIT TO THE WALL. PRINT WITH PETG AND AT…

Downloads
2,606
Likes
1,114
Rating
4.6
P
Printablesslavik kopanov

Chopstick Holder set

I designed this Chopstick Holder set with tray in SOLIDWORKS for the Printables Chopstick Holder contest (18/02/2023). It is already orientated to print easily in STEP & STL files so no supports required. The 4 Chopstick Holders fit…

Downloads
2,560
Likes
1,882
Rating
4.89
P
PrintablesZac Smith

LEAF1 F1 In Schools 2024 Season Upload

Hi Everyone! We are LEAF1 - an F1 in schools team who were crowned 2024 UK Champions, and competed at the world finals in Saudi Arabia, where we placed 5th. This account is run by the lead engineer - Zac. It's part of our open-source…

Downloads
2,445
Likes
15
Rating
0
P
PrintablesLoboCNC

Zip Tie Anchor

This zip tie anchor is a redesign of PeterEllens' version ( http://www.thingiverse.com/thing:24187 ) but I've made a little change so that it prints easily without supports. I've also included a small notch in the bottom to make it easy…

Downloads
2,435
Likes
522
Rating
5
P
PrintablesMZ4250

Chonky Red Dragon

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
2,390
Likes
307
Rating
5
P
Printablesh3li0

echo · tray

echo · tray modern minimalist tray, modular and stackable you can find two different options, the first one is the modular approach that requires assembly and using 8x M3x8 flat machine screws , which allows you to print the pattern in a…

Downloads
2,334
Likes
1,400
Rating
4.96

Borderlands 3 Psycho Mask

@MAVERICK_CZ made an awesome stand for the mask, it can be found at this link. https://www.printables.com/model/148366-borderlands-3-psycho-mask-holder Borderlands 3 is owned and created by Gearbox Software, LLC and 2K Games Update…

Downloads
2,298
Likes
563
Rating
5
P
PrintablesFahad Faisal

Gaming chopstick

Reupload from https://www.thingiverse.com/make:1001365

Downloads
2,172
Likes
269
Rating
4.88
P

Parametric Styrofoam EPS XPS Foam Screw Anchor

This is my take on printed anchors. I designed them for use with XPS foam from which I made an enclosure for my 3D printer. In combination with wood screws an washers they can be used to hold together foam boards or mount things like…

Downloads
2,149
Likes
862
Rating
4.96

Chopstick helper

Chopstick helper for sushi, sashimi, noodles etc...

Downloads
1,954
Likes
453
Rating
4.53
P
PrintablesSherlock_Ohms

#6 Screw Drywall Anchor with Threads

Expands as screw is inserted to keep it snug in the drywall. No supports needed. Recommend printing at <0.20mm layer height.

Downloads
1,892
Likes
203
Rating
5
P
PrintablesArt&Flywork

Chopstick fingers

Are you having a fight everytime you're trying to eat with chopsticks? This is your solution! 😉 These are fingertips with attached chopsticks. Just slide them on and enjoy a meal without chopsticks flying around. The finger tips are…

Downloads
1,877
Likes
659
Rating
4.43
P
Printablesfixumdude

Fixum Dude Motors PIP School Bus

Introducing the FDM (Fixum Dude Motors) print in place school bus. Version with or without the print-in-place stop sign available. Non-Stop Sign version recommended for very small children. Find the entire FDM Collection of vehicles here:…

Downloads
1,868
Likes
323
Rating
4.98
P
PrintablesDr Swaster

Kumiko Chopstick Storage Box

A replacement for my original chopstick storage box. I added the Kumiko to give it a more traditional look. Prints with no supports and 100% infill. Internal box dimensions are: Small Box 260x35x20mm, Large Box - 260x65x20mm Update! Added…

Downloads
1,858
Likes
954
Rating
4.92
P
PrintablesMrDaedalus

Finger Chopsticks - Updated

Made the finger holds a little more robust. V2 changes: changed teeth at the end of stick.

Downloads
1,759
Likes
156
Rating
4.97
P
Printableselectrosync

Seat Belt Buckle Fidget Toy - Choose Your Style

Model Seat belt buckles have a pretty satisfying mechanism, but it’s not a great idea to play with them on the road! Now you can 3D print your own fidget and desk toy to play with anytime that you want. The design features a double action…

Downloads
1,748
Likes
294
Rating
4.56
P
Printables3D Printing LaB

Alexa Echo Dot Cosmonaut Astronaut support

use the supports only for the upper slot for the LED and the helmet.

Downloads
1,714
Likes
273
Rating
4.89

Flashforge Adventurer 5M (AD5M) Printed Camera Mounts (two to choose from) v1.0

Both of these two models can serve as a drop-in replacement for the Flashforge injection molded camera mount, which is stock on the AD5M Pro, and can be ordered from Flashforge's website for use on the AD5M (non pro version). One of the…

Downloads
1,697
Likes
254
Rating
5
P
PrintablesPlasticPusher

Voron Stealthburner CW2 Umbilical SB2040 CAN BUS cable anchor

[English] I used the chain anchor 2hole design, closed the hole at the tip and enlarged the anchor a bit because I didn't like the designs or the just didn't fit. It includes a M12x1.5 thread to be able to attach a PG7 cable gland. Just…

Downloads
1,667
Likes
138
Rating
5
P

Amazon Echo Show 5 stand

Re-Upload: https://www.thingiverse.com/thing:4182196 Now the zip package should contain all files. I don't know why the archive is incomplete and the stl files are not shown in the preview. While searching for an Echo Show 5/8 stand i…

Downloads
1,666
Likes
181
Rating
4.88
P
PrintablesGurtmail

choc keycap tilter

An adapter that tilts a keycap on a choc switch. There are two files available so far: choc_tilted will tilt the keycap vertically. choc_tilted_rotated will tilt and also rotate the keycap 90 degrees. This is a remix of Kailh Keycap…

Downloads
1,666
Likes
274
Rating
5
P
PrintablesShrimp Workshop

simple hearth chopstick helper - fast print

Description A simple and functional heart-shaped clip that keeps chopsticks aligned and easy to use. It improves control, making it great for beginners and everyday use, while adding a subtle hearth accent. Sizing Depending on your…

Downloads
1,644
Likes
491
Rating
5
P
PrintablesOpenDelta

Gaming Chopstick

For snacking while gaming

Downloads
1,614
Likes
73
Rating
5
P
PrintablesPrusdara

Chopstick Helper

I designed a Chopstick Helper, because I didn't like the existing models. My design focuses on stability and should fit most chopsticks (see photos). The holes are angled slightly to make the chopsticks spread apart a bit at the bottom.…

Downloads
1,600
Likes
146
Rating
5
P
PrintablesD3D

Dry Wall Anchor, Rigips Dübel V3

Neue Version Rigipsdübel mit Spitze und Stabiler. Für andere Größen, in Breite und Länge skalieren. New version of plasterboard dowel with point and stabilizer. For other sizes scale the width or length

Downloads
1,536
Likes
90
Rating
5
P
PrintablesZ3R0-C00L

Alexa Echo Pop Wallmount

Wallmount to Wall mount to mount the Echo Pop on the wall at a 45 degree angle. Printed in PLA

Downloads
1,532
Likes
91
Rating
4.5
P
PrintablesJMcK

Echo Dot Hand

Stand for holding your Echo Dot 4 or 5 Shout out to JS-studio for the very detailed “Addams Family Thing” model!

Downloads
1,529
Likes
289
Rating
5
P
PrintablesShampoo

Jinx Chompers - Enhanced Version

Introducing my Jinx Chompers! Quick Note: I shall be reworking the Vents & Prox. Sensors soon. I am not happy with their push-fit design. For now, you can glue them in place or print one and just scaling to fit the print. Will design a…

Downloads
1,525
Likes
720
Rating
5
P
PrintablesFabianMbaso

Finger chopsticks

Finger Chopsticks. Category: Kitchen & Dining

Downloads
1,501
Likes
117
Rating
5
P
PrintablesReferentiel

Tony Tony Chopper

One piece You can choose the way to print Chopper with the 2 files ;)

Downloads
1,436
Likes
119
Rating
5
P
PrintablesEIGA

MOTE - Choc Low Profile Flat Keycaps

These minimalistic Choc low profile keycaps can be used with the original TOTEM keyboard by GEIST or with VOID's TOTEM Redux case, which is optimized for FDM printing. Recommened print settings: - OrcaSlicer v2.0 - Arachne wall generator…

Downloads
1,432
Likes
138
Rating
5

The chokestick - Airtight bag clip

Features This is a design I made in OpenSCAD after discovering the Slide Zipper at my favorite 100 Yen store. After a few iterations, I ended up with a model that prints in place without supports , that is monolithic (no movable parts),…

Downloads
1,421
Likes
460
Rating
4.56
P
PrintablesRithm3D

Chief Petty Officers - US Navy (Anchor Chevrons)

These were designed to have a flat back, thus make them mountable on flat surfaces using the appropriate adhesive. The height as it lays on its back is at 6.5 mm. The width is between 102-115 mm. The Length at 176 mm. I recommend the…

Downloads
1,418
Likes
83
Rating
5