P
Printablescalvindonger
Finger Chopsticks
Hi everyone this is a finger chopstick I made. It has offset teeth for better grip of small objects.
- Downloads
- 11,853
- Likes
- 1,192
- Rating
- 4.95
Search results: chopstic
Counting matching models…
P
PrintablesReviloRedab
Chopstick Cheaters (not just) for the kids
ChopstickCheaters to let your kids eat with chopsticks. Easy and fast print and a lot of fun! V2 now prints with no supports. Use PETG to be able to put them in the dishwasher. PLA works fine but may not stand the heat. Made for…
- Downloads
- 6,647
- Likes
- 2,900
- Rating
- 4.84
P
PrintablesBalulo3Dmaker
chinese chopsticks clip
A simple yet elegant chopstick clip. Keeps chopsticks aligned and secure before, during, and after use. A discreet acces
- Downloads
- 3,481
- Likes
- 1,254
- Rating
- 4.63
P
PrintablesMarkus
Finger Chopsticks - Stick to the finger mod
I like the Finger Chopsticks from @MrDaedelus but they often slip from my fingers. It's also not possible to strech the chopsticks so i made a modded version. Normal: Diameter of the finger rings is around 22mm or 0.9 Wurstfinger. Small:…
- Downloads
- 3,042
- Likes
- 246
- Rating
- 4.76
P
PrintablesMichael
Chopsticks Clamp
I saw something like this at a restaurant and was able to make a similiar item for use at home. The print works well out of PLA filament and the fun colors are great for kids. Print time is about 8 minutes Of all the utensil holders I've…
- Downloads
- 3,006
- Likes
- 953
- Rating
- 4.7
P
Printablesfifindr
Snack Finger Chopsticks
Enjoy snacking while keeping your hands clean with the Snack Finger Chopsticks ! Perfect for gaming, working, or just enjoying your favorite snacks without the mess. These lightweight, ergonomic chopsticks allow you to grab chips,…
- Downloads
- 2,806
- Likes
- 816
- Rating
- 4.97
P
Printablesslavik kopanov
Chopstick Holder set
I designed this Chopstick Holder set with tray in SOLIDWORKS for the Printables Chopstick Holder contest (18/02/2023). It is already orientated to print easily in STEP & STL files so no supports required. The 4 Chopstick Holders fit…
- Downloads
- 2,560
- Likes
- 1,882
- Rating
- 4.89
P
PrintablesMrViddy
Chopstick Cheaters Helpers Trainers
Inspired by the design from FUN CHOP chopstick helpers. Great for rounded chop sticks as well. Recommend Print in PETG for flex and strength. Recommend 100% Infill FunChop chopstick Helpers (Amazon Link⬇) https://a.co/d/1i6oWUr
- Downloads
- 2,440
- Likes
- 460
- Rating
- 4.95
P
PrintablesFahad Faisal
Gaming chopstick
Reupload from https://www.thingiverse.com/make:1001365
- Downloads
- 2,172
- Likes
- 269
- Rating
- 4.88
P
PrintablesYaroslav Baranovskiy
Chopstick helper
Chopstick helper for sushi, sashimi, noodles etc...
- Downloads
- 1,954
- Likes
- 453
- Rating
- 4.53
P
PrintablesArt&Flywork
Chopstick fingers
Are you having a fight everytime you're trying to eat with chopsticks? This is your solution! 😉 These are fingertips with attached chopsticks. Just slide them on and enjoy a meal without chopsticks flying around. The finger tips are…
- Downloads
- 1,877
- Likes
- 659
- Rating
- 4.43
P
PrintablesDr Swaster
Kumiko Chopstick Storage Box
A replacement for my original chopstick storage box. I added the Kumiko to give it a more traditional look. Prints with no supports and 100% infill. Internal box dimensions are: Small Box 260x35x20mm, Large Box - 260x65x20mm Update! Added…
- Downloads
- 1,858
- Likes
- 954
- Rating
- 4.92
P
PrintablesMrDaedalus
Finger Chopsticks - Updated
Made the finger holds a little more robust. V2 changes: changed teeth at the end of stick.
- Downloads
- 1,759
- Likes
- 156
- Rating
- 4.97
P
PrintablesShrimp Workshop
simple hearth chopstick helper - fast print
Description A simple and functional heart-shaped clip that keeps chopsticks aligned and easy to use. It improves control, making it great for beginners and everyday use, while adding a subtle hearth accent. Sizing Depending on your…
- Downloads
- 1,644
- Likes
- 491
- Rating
- 5
P
PrintablesPrusdara
Chopstick Helper
I designed a Chopstick Helper, because I didn't like the existing models. My design focuses on stability and should fit most chopsticks (see photos). The holes are angled slightly to make the chopsticks spread apart a bit at the bottom.…
- Downloads
- 1,600
- Likes
- 146
- Rating
- 5
P
PrintablesFabianMbaso
Finger chopsticks
Finger Chopsticks. Category: Kitchen & Dining
- Downloads
- 1,501
- Likes
- 117
- Rating
- 5
P
PrintablesJustMaiaMakes
Doodle Bob Pen|Pencil|Chopstick Holder
He holds stuff! Either paint or add in color switches to get the black, I like the aesthetic of simple sharpie. No Supports needed, just snip off the small supports in the hands.
- Downloads
- 1,390
- Likes
- 272
- Rating
- 4.86
P
PrintablesGeert Bevin
Wearable Chopsticks with Sleeve
Inspired by Snactiv ( https://snactiv.life ), these are wearable chopsticks that allow you to snack without getting your fingers dirty. Perfect for when you're working, gaming, chilling on your phone, ... A sleeve is included to keep the…
- Downloads
- 1,321
- Likes
- 168
- Rating
- 4.86
P
PrintablesJoe R
Chopstick Trainer
Created by https://www.thingiverse.com/Zydac this Tool helps kods (and adults) to use chopsticks the right way. This chopstick trainer can be used squeeze to close (standard) or squeeze to open (to hold your food in place). Perfect for…
- Downloads
- 1,217
- Likes
- 132
- Rating
- 4.85
P
Printablesjajaum3d
Fish Chopstick Holder
🐟 Fun, functional, and perfect for sushi night! This Fish Chopstick Holder adds a playful touch to any table while keeping your chopsticks clean and elevated. Printing Instructions File in STL to print without any support or brim . The…
- Downloads
- 1,033
- Likes
- 512
- Rating
- 5
P
Printablesbraga3dprint
Impossible chopstick holder
The Impossible Chopsticks Holder is a clever and fun design! This unique model will hold your chopsticks and make a great conversation piece at your next dinner party. Disclaimer: Please be advised that the Impossible Chopsticks Holder…
- Downloads
- 1,031
- Likes
- 294
- Rating
- 4.17
P
PrintablesHenry Crete
Bowl with chopsticks Hair piece
Little Bowl to go in your hair
- Downloads
- 1,031
- Likes
- 1,039
- Rating
- 4.93
P
PrintablesJordan Husney
Kids' Chopsticks / 筷子 / 箸 Trainer
Model is fully parametric, download the .f3d file to adjust and size for any pair of chopsticks. Recommended to print in PETG (or PA if you've got it), model oriented on its side so the fibers run through through spring component for…
- Downloads
- 996
- Likes
- 388
- Rating
- 4.83
P
Printablesplasmata
Origami Crane (inspired) Chopstick Rest
An origami inspired chopstick rest. Model is able to be printed without any supports by printing on the back tail.
- Downloads
- 793
- Likes
- 378
- Rating
- 5
P
PrintablesGeoff
Chopstick Trainer v2
This remix has rounded outer edges to make it more comfortable to hold. This chopstick trainer can be used squeeze to close (standard) or squeeze to open (to hold your food in place). Based on the model by Zydac.
- Downloads
- 779
- Likes
- 88
- Rating
- 4.64
P
PrintablesPoison Apple Prints
Disney Mushu Mulan Chopstick Holder / Incense Burner
Check out Poison Apple Prints on Patreon for loads more Disney inspired stl's! including Articulated Mushu and a Mulan inspired zen garden in honor of Chinese New Year! https://www.patreon.com/PoisonApplePrints The chopstick adapter is…
- Downloads
- 762
- Likes
- 305
- Rating
- 5
P
PrintablesAndreas Mass
Chopstick Kitty
Got this idea when I saw the contest theme and wanted to see if it works. It sure did and I'm quite happy with the result. This kitty will hold your chopsticks but it won't be stoked about it. It also works nicely as a pure deco or fidget…
- Downloads
- 719
- Likes
- 360
- Rating
- 4.6
P
Printablesandrepia
Hashi / Chopstick Clip
Printed in PLA, 45º, raft, without support
- Downloads
- 699
- Likes
- 177
- Rating
- 5
P
PrintablesLins
Gaming Chopsticks - Long & Sturdy
Hi. This is my gaming chopstick model. It's long, thick, strong, and grippy. I made it in Fusion 360. Thanks! I am new to 3D printing. My print profile is on Makerworld.com, but it contains 2 plates with 2 sizes, and I added a small .1mm…
- Downloads
- 664
- Likes
- 33
- Rating
- 5
P
PrintablesRC_3DWorks
Chopstick help / buddy
Struggeling with chopstick? Put the chopsticks in de holder en go! nice and easy
- Downloads
- 638
- Likes
- 210
- Rating
- 4.67
P
PrintablesToyLab
Handy Chopsticks
Handy Chopsticks – Fun & Functional 3D Printed Sticks Handy Chopsticks are a fun and clever tool designed for gamers who don’t want to choose between eating and playing. Each stick ends with tiny hands that help you grab food easily…
- Downloads
- 602
- Likes
- 149
- Rating
- 4.67
P
PrintablesHeine Sørensen
Chopstick
A little sanding is needed in the end.
- Downloads
- 582
- Likes
- 32
- Rating
- 4.33
P
PrintablesManuelM
Sushi Chopsticks w/helper
These chopsticks are designed especially for enjoying sushi, but they’re also great for other Asian dishes like ramen, dim sum, or pad thai. The built-in support makes them ideal for beginners or anyone looking for a more comfortable…
- Downloads
- 564
- Likes
- 64
- Rating
- 5
P
PrintablesPylonPrints
Japanese Garden Chopstick Holders
Four little Japanese garden miniatures. I initially made these to submit in the 2023 Chopstick Holder contest [here] , but missed it by a few hours. Thought I'd post them anyways :P My printer gave me some difficulty with the tiny…
- Downloads
- 552
- Likes
- 144
- Rating
- 0
P
Printablesgskollnau
Chopsticks
Chopsticks for decoration. If you want to eat with them, first cover with food-safe varnish. Its possible, the sticks were infested with bacteria, if you do not.
- Downloads
- 539
- Likes
- 35
- Rating
- 5
P
PrintablesCaracolmaker
sushi chopsticks
In the slicer I remove the first milimeter from the bottom or to avoid putting supports. Print instructions In the slicer I remove the first milimeter from the bottom or to avoid putting supports.
- Downloads
- 509
- Likes
- 41
- Rating
- 5
P
Printableskwerkshop
Crab Chopstick Holder
This crab was designed to simply hold your chopsticks but I guess it will also hold pens or pencils. The part is designed to print without supports but be careful with the legs and adhesion to the bed on the first layer. I used a raft to…
- Downloads
- 496
- Likes
- 135
- Rating
- 5
P
PrintablesAsphalt3D
Minimal Chopstick Cuff Holder and Rest
Hold your chopsticks together until it's time to eat, then keep your table clean with this dual-purpose chopstick cuff holder and rest. Add a touch of elegance to a dinner party or just prevent losing your chopsticks during a meal on the…
- Downloads
- 484
- Likes
- 189
- Rating
- 4.73
P
Printables3Demon
Koi Fish Chopstick Rest
The fish prints first separately and is then inserted into the chopstick rest while printing. Choosing the correct slicer settings is important to make the model hollow. 3D printing tips The colored spots on the fish are printed using a…
- Downloads
- 467
- Likes
- 402
- Rating
- 4.67
P
Printables3D P Gone Wild
Gaming Chopsticks
I modeled these after some gaming chopsticks I saw and wanted to see if I could make something similar. These are not perfect by any means but they work. They are a little weak in the finger loops, but if you print with a higher infill it…
- Downloads
- 457
- Likes
- 40
- Rating
- 4.5
P
Printablesbraga3dprint
Sacred Gate Torii Chopstick Holder
The Torii Gate Chopstick Holder is a unique and stylish accessory for your dining table. Inspired by traditional Japanese architecture, this 3D printed holder is designed to keep your chopsticks neatly organized and within easy reach. The…
- Downloads
- 443
- Likes
- 250
- Rating
- 5
P
PrintablesSteve
Chopstick Holder
This is a simple model but it’s one of the very first things I created and designed on my own. I recently started learning Fusion 360 and have been practicing making some simple but functional things like this. I needed a place to store…
- Downloads
- 400
- Likes
- 62
- Rating
- 5
P
Printablessupercoolguineapig
mouse chopsticks
a way to not get your finger or mouse dirty
- Downloads
- 396
- Likes
- 68
- Rating
- 4.88
P
PrintablesLynola
finger chopsticks
Idea came from convention giveaways. Theirs was too small. Created this one for larger fingers.
- Downloads
- 396
- Likes
- 37
- Rating
- 5
P
PrintablesMadigan
Ultimate Snack Gripper Chopsticks
Features… Aerated handle with grip bumps for comfort, lightness, ease of handling and no-slip. Subtle, yet effective 3° bend at end of sticks for a solid grip on those snacks. Teeth at the very tip perfectly come together for picking up…
- Downloads
- 384
- Likes
- 55
- Rating
- 5
P
PrintablesLali
Hippo Chopstick Holder
A chopstick rest that looks like a hippo head half out of water. I used Blender to sculpt it and rendered the first image shown here. The GCODE is configured under “Generic PLA” profile and 10% “Adaptive Cubic” infill for a Prusa MINI.
- Downloads
- 371
- Likes
- 92
- Rating
- 5
P
PrintablesThorin Oakenshield
Japanese Chopsticks holder
Chopsticks holder with Japanese symbols - Mount Fuji, Bonsai, Torii gate, Rising red sun, Katana holder You can print the relief in one color or in multi-color, I added g-code for multi-color printing You can find another Chopstick holder…
- Downloads
- 368
- Likes
- 180
- Rating
- 5
P
Printablestwothingies
Happy Chinese Takeout Box Chopstick Holders
Hold your chopsticks with these happy Chinese takeout boxes! We made three different facial expressions for the containers, to match the different types of food: yummy 🙂 spicy 😈 smirking good 😏 We printed these at 0.2 mm layer height…
- Downloads
- 367
- Likes
- 246
- Rating
- 5
P
PrintablesStarlightAR
Ark of the Covenant (Chopstick Holder & Box)
Supports are needed everywhere For some reason this was the first thing that popped into my head for a chopstick holder. Still confused as to why but I made in anyway. So Enjoy!
- Downloads
- 320
- Likes
- 30
- Rating
- 5
P
Printables3DPrintBunny
Chopstick plant or flower stand
A hanging plant or flower stand using old chopsticks. Easy to print - no supports needed See detailed instructions on how to assemble it here: https://www.instructables.com/Recycled-Chopsticks-Flowerplant-Stand/
- Downloads
- 319
- Likes
- 207
- Rating
- 5
P
PrintablesNokedli
Gaming Chopsticks
This is an improved design of the Gaming Chopsticks. The model has been properly redesigned in CAD (the original has some artefacts and inaccuracies), while also adding several improvements. Changes include: - wider finger support for…
- Downloads
- 319
- Likes
- 25
- Rating
- 5
P
PrintablesHargoHub
Chopstick Cheaters - 5 Models
These are helpful when someone is still learning how to use chopsticks. Depending on how the chopsticks break, you might need to shave down the wood a bit to make it fit properly Printing notes: The “Basic” Chopstick Cheater in the photo…
- Downloads
- 313
- Likes
- 37
- Rating
- 0
P
PrintablesSASSy Design
Traditional Chopstick holder - Vase mode
Simply, but modern chopstick holder inspired by tradicional japanese architecture. Easy to print in vase-mode or: 0% infill 0 top and 0 bottom layers 2 outter layers Happy printing!
- Downloads
- 301
- Likes
- 93
- Rating
- 5
P
PrintablesKyuubiNight
Gator Chopstick Rest
This is a design I made for a Printables contest. This is an alligator I sculpted in Nomad Sculpt and edited in PrusaSlicer. This is meant to be a chopstick rest, but can be used as decor or aquarium decor as well. Print flat with no…
- Downloads
- 291
- Likes
- 56
- Rating
- 5
P
PrintablesSlablaadje
Chopstick Hacker! For ease of eating delicious food
Hacking I liked the chopstick cheaters. Not for me (obviously I've long mastered the art of chopstick eating :), but my girlfriend really finds these useful. But, there's several things I didn't like with the original (why else would…
- Downloads
- 291
- Likes
- 61
- Rating
- 5
P
Printablesbraga3dprint
Baby Yoda's Force-Fueled Chopsticks Holder
The Baby Yoda's Force-Fueled Chopsticks Rest is a must-have for any Star Wars fan. This model features the adorable character from The Mandalorian series using his force powers to hold up the chopsticks. It is a simple and functional…
- Downloads
- 290
- Likes
- 128
- Rating
- 0
P
PrintablesBlueFalcon1066
Chopsticks
Wanted to see what I could come up with in 10 minutes on fusion. Not sure if they're food safe, but they can pick stuff up just like real chopsticks. I did 100% infill and printed them diagonally for max strength. Print Settings Printer…
- Downloads
- 288
- Likes
- 33
- Rating
- 0
P
PrintablesMupshot
Chopstick case
we recently went to a restaurant that didnt have the cheap bamboo disposable chopsticks. My daughter has a set she likes and requested a case to carry them in her bag. settle for a ziplock bag? NONSENSE! 2 versions. the original is a…
- Downloads
- 288
- Likes
- 45
- Rating
- 5
P
PrintablesFrank
Chopsticks Holder
Chopsticks holder for kids. We got them at the restaurant and modeled one for the others kids. They work great. I printed in PETG. 100% infill and .15 layer height. They are suitable for chopsticks between 6.8 - 7.3 mm. But you can scale…
- Downloads
- 273
- Likes
- 34
- Rating
- 5
P
Printables3DPrintBunny
Chopstick desk or wall calendar
A perpetual calendar that can sit on your desk or hang on your office wall. Each circle moves smoothly and independently. It uses two chopsticks for the stand. Slots together without glue. Easy to print with no supports This calendar is…
- Downloads
- 259
- Likes
- 83
- Rating
- 4.5
P
PrintablesJJ
Japanese Sandal Chopstick Holder (Geta)
This is an original model I made myself in Fusion 360. I am entering the chopstick holder competition, this is the first one I am entering. The model is based on the traditional Japanese footwear called “Geta” and functions as a wooden…
- Downloads
- 258
- Likes
- 89
- Rating
- 5
P
PrintablesWavz3D
Chopstick Helpers w/ Stand
Great Original Design by ReviloRedab & Remix by Slablaadje. Remixed to fit 7.8mm Chopsticks and added the ability to “rest” the chopsticks down when not in use. “Make Overhang Printable” (In Cura under “Experimental”) if would like. Makes…
- Downloads
- 258
- Likes
- 34
- Rating
- 5
P
PrintablesJangy
TPU ChopStick Trainer
TPU Chopstick Trainer. Great to teach kids to use chopsticks. The small design is for disposable chopsticks. No supports needed, print with the base down. Printed with TPU 95 Print Settings Supports: No Resolution: 200 Infill: 20…
- Downloads
- 252
- Likes
- 61
- Rating
- 5
P
Printableste.3D
Chopsticks Trainer/Helper
a simple and quick to print chopstick trainer or helper for sticks around 6mm diameter. insert sticks from side with gap. best to print in PETG for flex and strength, a little support can be used for nice shaped holes, 2 perimeters should…
- Downloads
- 252
- Likes
- 20
- Rating
- 5
P
Printablestimothyjsummers
Gun-style chopstick helper
I grabbed this from thingverse and republished here for easy slicing prints well with no supports. Easy assembly after cutting the parts out of the card style print. Makes for a nice gift or party favor.
- Downloads
- 249
- Likes
- 31
- Rating
- 2
P
Printablesbetaiv
Snack chopsticks
This chopsticks allow you to eat messy stuff without making your table dirty. PETG is preferable since PLA will eventually break.
- Downloads
- 248
- Likes
- 24
- Rating
- 5
P
PrintablesSTYLE NOGI
TWISTED CHOPSTICKS
Let's try 3d print. Category: Kitchen & Dining
- Downloads
- 235
- Likes
- 20
- Rating
- 5
P
PrintablesTristan Veilleux
Finger chopsticks
you can scale it or cut the at the midle of the figer hole if you have too big finger 😁👍
- Downloads
- 232
- Likes
- 17
- Rating
- 5
P
Printablesmonev44
Chopsticks Travel Box
History One of the very fist 3D print projects I ever did when I got my first printer was a box to hold a pair of chopsticks made from reclaimed redwood by a fine arts woodworking student. As I had a cold this week I was in the mood for a…
- Downloads
- 222
- Likes
- 67
- Rating
- 5
P
PrintablesThorin Oakenshield
Chinese chopstick holder
Chopstick holder with Chinese symbols-Ying-Yang and dragons I added the g-code to color print the Yin Yang symbol You can find another Chopstick holder model here: https://www.printables.com/cs/model/407219-japanese-chopsticks-holder
- Downloads
- 218
- Likes
- 52
- Rating
- 5
P
PrintablesAinon3Dtisk
Asian chopsticks, cutlery, tweezers
Hello, Today I have Chopsticks for you. Can't you eat with classic chopsticks? Are you tired of it? Here is the solution! They are really great and work well, I ate a lot. :-) Happy printing! I used PLA/PETG as the material. You need to…
- Downloads
- 213
- Likes
- 43
- Rating
- 0
P
PrintablesАртур Бикташев
PAWSTICKS | SUSHI CHOPSTICKS WITH CAT & DOG PAWS (replica)
Все же пришли сюда из рилсов? Я тоже искал этот файл, чтобы распечатать и есть роллы с милыми палочками. Но бесплатного не было. Пришлось моделировать самому. Так что, господа пираты, приятного скачивания и распечатки =)…
- Downloads
- 209
- Likes
- 25
- Rating
- 5
P
PrintablesCommunity_Crafts3D
Finger Chopsticks
Its a basic print and I would recommend using basic default settings. One tip is to increase the infill to around 30%. The model takes very less filament and is quick too. -Under 30 minutes -Under 10 grams of PLA
- Downloads
- 208
- Likes
- 25
- Rating
- 4
P
PrintablesGrayfaux
Steamed Buns Chopstick Holders
These chopstick holders were designed to look like classic steamed buns and can be housed inside there steamer for storage. Chopsticks included.
- Downloads
- 205
- Likes
- 151
- Rating
- 5
P
PrintablesJudah Chang
grippy chopsticks
grippy chopsticks. one right handed chopstick file and one left handed chopstick file ;). i printed them laying down cause i though that would be the strongest but you can do whatever you like Print Settings Printer: anycubic Rafts: No…
- Downloads
- 203
- Likes
- 14
- Rating
- 0
P
PrintablesBlobofdoom
Hands-free chopsticks
Remix of a similar design by @MrDaedalus. I started from scratch in fusion 360. I liked the length of the original and kept that, but wanted to make something more streamlined, using less filament, a bit sexier, and more ergonomic.
- Downloads
- 202
- Likes
- 25
- Rating
- 5
P
Printablesrenewz
Chopstick Holder Case
It's best printed with a 0.4mm Nozzle, I printed it with 0.6mm that's why it has some gaps, can be solved by using Ironing. OnShape Model
- Downloads
- 201
- Likes
- 47
- Rating
- 2.33
P
PrintablesRodrigo Rosseto
Katana - Chopsticks holder (Kit card)
Be always ready to slice the inconvenience , always on hand…. Ops on your wallet. Very versatile and badass chopsticks stand. Hope you all enjoy.
- Downloads
- 200
- Likes
- 77
- Rating
- 0
P
Printablesvidision
Chopstick Helper V2
Like my first version it's meant to be printed vertically without supports. I use PETG for flexibility, and have not tried it with any other materials. We have found these are a bit too big to hold some chopsticks. You may want to size…
- Downloads
- 198
- Likes
- 19
- Rating
- 0
P
PrintablesShiro321
Katanakake Stand Chopstick Holder
Cradles your chopsticks, like an honored katana, always clean ready. Treat your chopsticks with respect and place them on this decorative and easy to print katanakake style holder. It even comes on spru, so you can easily gift it to the…
- Downloads
- 190
- Likes
- 35
- Rating
- 5
P
Printables! ≈
chopstick helper and holder
The holes are made for chopsticks with a diameter of 6mm print with 3 perimeters and 100% infill. This file should not need support if you are able to print holes with minimal sagging. Orient the small rings to the top when printing so it…
- Downloads
- 188
- Likes
- 36
- Rating
- 5
P
Printablesautomontronic
Mickey Mouse Ears Chopsticks Helpers
The slot for the chopsticks is 6.7mm x 6.7mm. If you need a different size, let me know and it can be adjusted.
- Downloads
- 180
- Likes
- 45
- Rating
- 0
P
PrintablesAlabamaTick
chopsticks with built in fingers and a supportive base for printing
I found some chopsticks with fingers built-in on this website. This was one of my first prints. My printer was extruding plastic into thin air?! Not sure what was wrong until I realized this needed support. Took me 2 days to build simple…
- Downloads
- 176
- Likes
- 7
- Rating
- 0
P
PrintablesLazlo
Mini Firepit Chopstick Holder
I wanted a kind of off-the-wall idea for a chopstick holder. This may seem on the fringe of contest eligibility, but I specifically designed this holding metal chopsticks to simulate roasting a marshmallow over a mini flame. You can use…
- Downloads
- 163
- Likes
- 101
- Rating
- 5
P
PrintablesSquasherJoe
Children's Chopsticks
A full-sized pair of print-in-place chopsticks for inexperienced and impaired users as well as children. In order to work, the chopsticks require a rubber-band that pulls them together. (see photo) By using different length rubber bands…
- Downloads
- 162
- Likes
- 26
- Rating
- 0
P
PrintablesTomTLC
Chopstick Holder Pillow
Modeled by me in Blender. Use filament of your choice. Might need some supports under overhangs.
- Downloads
- 162
- Likes
- 73
- Rating
- 5
P
Printablesdrewdz
Chopsticks Helper
Most people who are not born using them, have that one relative or friend who always asks for a knife and folk at the Chinese restaurant. Well, here is your answer, print one of these and they will be able to use chopsticks like the rest…
- Downloads
- 161
- Likes
- 16
- Rating
- 5
P
PrintablesSven
origami crane chopstick holder
The 3D printed model of an origami crane chopstick holder is a beautiful and intricate piece of functional art. It is designed to resemble a traditional origami crane, with its elegant and graceful lines and delicate folds. The chopstick…
- Downloads
- 157
- Likes
- 28
- Rating
- 5
P
PrintablesHana
Ribbon chopstick rest
I designed ribbon shaped chopstick rest for the Printables' contest. Simple one can be printed in Prusa Mini+ and other single extruder printer. That with dots can be printed in IDEX printer, I also suppose this can be printed in Mk3 with…
- Downloads
- 148
- Likes
- 32
- Rating
- 5
P
PrintablesGiuseppe Alberti
Oval Chopstick Holder
Model inspired by “Wooden Chopstick Rest-Ebon” by Luala Silk.
- Downloads
- 147
- Likes
- 74
- Rating
- 4.4
P
Printableslitlnemo
Hashi Hashi (chopstick rest, miniature Japanese bridge)
The Japanese word for chopsticks is hashi (箸). The word for bridge is hashi (橋). So here is a hashi to rest your hashi! (Would that be a 橋 箸置き - hashi hashi-oki? Or ブリッジ箸置き, burijji hashi-oki? I dunno, I've forgotten my college Japanese…
- Downloads
- 145
- Likes
- 51
- Rating
- 0
P
PrintablesWardHill3DP
Sakura Cherry Blossom Chopstick Stand
This lovely little cherry blossom set inspired by the Japanese Sakura cherry blossoms. The full set allows 5 sets of chopsticks to be rested on and when not in use form a cherry blossom with included tray. This can also be printed as a…
- Downloads
- 144
- Likes
- 33
- Rating
- 0
P
PrintablesChiefStroodle
Better Finger Chopsticks
Remixed Finger Chopsticks from @calvindonger Added support to prevent breakage at finger tabs Printer: Ender 3 Pro (Sonic Pad) Slicer: Prusa Slicer Slicer Settings: Bed 70 for first Layer Bed 60 for all other layers Layer height 0.2mm…
- Downloads
- 143
- Likes
- 10
- Rating
- 5
P
PrintablesAndres L
Chopsticks organizer (drawer organizer for straws, chopsticks, skewers)
Chopsticks organizer (drawer organizer for straws, chopsticks, skewers)
- Downloads
- 140
- Likes
- 51
- Rating
- 5
P
PrintablesJC3D by João Coelho
Maki Chopsticks Holder
The best stand for your chopsticks! A salmon maki made up of three pressure-fitting pieces that allow you to hold your chopsticks before, during, and after your meal. The pieces are easy to print, don't need holders and fit together…
- Downloads
- 139
- Likes
- 53
- Rating
- 5