320 models
Never go offline in style! This Chrome T-Rex bead is the perfect little detail to customize your hoodie. Fun, nostalgic, and easy to print! 🦖 If you enjoy my creations and would like to support my work, a coffee is always appreciated! ❤…
Chrome Dino Easter Egg ! IMPORTED FROM THINGIVERSE SETTING ARE FOR MPSM V2 ! 20211217 I was searching around for a Google Chrome "Dino 404 error no internet" 3D model and never find one quite like I wanted, so I made one in SketchUp. The…
They can be used combined with each other or not. Printed with 0.4mm nozzle, 0.15mm layer height and 20% density Added freecad file in case you want to modify the design Se pueden utilizar combinados entre sí o con un sólo motivo. Impreso…
Chrome dino. Easily printable without supports if the dino and cacti are laying flat on the buildplate. Might need to be scaled slightly to fit smaller buildplates. If anyone has any questions please contact me, THop3D
Filiament Type: TPU Rafts: No Supports: Yes Resolution: 0.4 nozzle, 0.2 layer height Infill: 100 Recommened Orientation button side down
VW Alloy Wheel Centre Cap 65mm Part number - 3B7601171XRW If yours breaks and you still have the original, heat gun the aluminium logo plate off, print this file, and contact adhesive together. Alternatively, you can just print and use…
A Fun and easy to print hard case remote for your Chromecast with Google TV. Designed for 0.2mm layer heights and prints with no supports. Does a great job preventing accidental volume changes!
The Charging Station was designed as a low-cost alternative to commercially available charging stations for our school. The holder/charging station can be made for between $60 and $80 including the feet and power-strip. The center area…
Google Chrome developers surely must have a soft corner for people occasionally losing internet connections! The Chrome Offline Dinosaur game was developed by a small team of about 6 developers. Edward Jung is one of the developers of the…
Created a Google TV Chromecast Remote Wall Mount Caddy to be mounted to the back of our TV. Used command strips for mounting. Printed in PETG (incase the back of the TV gets hot) at 0.2mm layer height.
Printed in PLA.
Modeled this for someone who lost their remote backer. It's 98% as close as the stock one. Its difficult to print the small tabs closest to the middle of the remote, so better results might be achieved through a smaller nozzle or a resin…
Mount your Chromecast with GoogleTV remote on a wall or the side of some furniture with this minimalistic mount. The remote slides in snugly without any unnecessary friction. Designed with a flat back to be attached with some double sided…
this model is the dino from the no wifi game from google i original made it i suggest to print it in slower speed for the links it is a fun toy to play with or to give to sombody as a gift or for fun
Small, elegant stand to use your laptop as a screen (with mouse and keyboard setup), to unclutter the desk and raise the screen to a proper level. Easy print, no supports, only 25 grams of filament. Stands stably with no flex. If you have…
I was never able to find the stylus holder for the Chromebook Duet 5. I made one that will fit the slot in the back cover for the Duet 5. It fits very tightly, so there is very little chance of it falling off. The diameter fits the Lenvo…
My friend uses a Chromebook and his quote key ( " ) fell off somewhere. This key can replace any of the main square keys. Feel free to remix and add letters to replace specific key or fix to your size. Also works with any computer that…
Simple holder for the gen 4 chromecast. If you don't want the chromcast to hang on only the HDMI and USB cable, this holder can be used with 2 sided tape. If you need to make changes the f3D file is inkluded.
These are corner brackets for mounting a chromebook or laptop vertically using screws. The channel depth is 25mm. November 10, 2023: Added brackets with 30mm channel depth denoted by “Netbook” in the filename. March 17, 2025: Added a…
A wall mounted remote holder for Google Chromecast with Google TV (Gen.4) 0.2 layer hight printed in PLA in 1 hour - no support needed
This is a cover for the Monochrome 1.3" 128x64 OLED graphic display which can be found here: https://www.adafruit.com/product/938 Print Settings Printer: Anet A6 Rafts: No Supports: No Resolution: 0.1 - 0.2 Category: Electronics
There is one dinosaurs, a bird thing and 5 cacti. No supports needed.
Chromecast remote control case / extender
Print with the front on the bottom of the print bed no supports are needed. Additional components are needed to complete the project which can be found on the teaandtechtime.com/an-analog-aerochrome-film-replacement/ blog post.
Print with the front on the bottom of the print bed no supports are needed. Additional components are needed to complete the project which can be found on the…
The Chromecast Remote case! Features: Easy to clip in and clip out with the help of the service hole at the bottom Print it bright and colorful! Never lose your remote again!! Sleek design with a place to rest your index finger Easy…
Chrome dino with base to stand on Credit to Andrew Bell / Dead Zebra Dino Set Print instructions Layer height: 0.15mm (max 0.2) Infill: 10-20% Recommended GoogleDinos_extended.3mf and GoogleDinos_base.3mf should be printed together. I…
Uploading to make sure this legendary offline Rex bling lives on here. Print as oriented. Scale as needed. 100% is 225mm x 83mm x 20mm(same in pic).
Description Dino Chrome Keychain
MARCH 2024 UPDATE After almost two years with the old file, I was getting really frustrated with the remote case and decided to re-design it from scratch. Even though the file looks nearly identical, it has several key changes: Improved…
You can set it on your desk, hang it up on the wall or use it like a key ring.
This sleek, muscular figure captures the essence of balance, speed, and control — a futuristic being riding his board with effortless precision. Designed in a dynamic forward-lunge pose, the Chrome Surfer represents motion frozen in time…
I remixed this model made by Jirat (originally on Thingiverse). Now it can be used as a strong keychain. Print Settings Supports: Yes Resolution: 0,2
So that you can also see the flames from the addon Carnage at Devil's Run on the road. It took a few attempts to find the right size. For the cars, simply clip them on the roof and for the motorcycles, from the big rig and the final five…
I happen to sit on my Google TV remote all too often. The remote doesn't need to be see the TV at all to work. This leads to inadvertent pushing of buttons and interruptions in viewing time. With this REMIXED remote, buttons are protected…
Wall mountable remote holder for the Google TV Chromecast.
Simply put some double-sided adhesive tape under the Holder and stick it to a wall. Print time: 1:30h Costs: 10ct Print Settings: Printer: Ender 3Pro Rafts: No Supports: Yes Resolution: 0,16mm Infill: 20% Filament material: PLA
Remember to add filament change scripts at layer where you want color changes (example in pictures). V1.1: Added Dino's eternal nemesis to the scene: cactus. V1.2: Now with a lovely twist, in fact two of them. V1.3: Added festive Dino,…
Pixel dino fled Chrome for your shoe to stop dodging cacti. Now ruling prehistoric style & offline mode.
This is for anyone who wanted to attach their Apple AirTag to the Chromecast with Google TV Remote.
This is a remix of torystark's model over on Thingiverse. https://www.thingiverse.com/thing:4825994/files Description The model is great on its own, but we needed a way to find the remote when it disappears in the living room. This uses a…
Stand for the chromecast remote. Like my other model, which has an additional place for a hitachi beamer remote. There's also a small compartement for a pen or something similiar. There's a second modell with a slighlty bigger…
This is a replacement insert for the Sidchrome tool sets shown. It will likely not fit other eras than those shown, as some of the individual tools changed dimensions frequently over the years. Found these files useful? Buy me a coffee !…
Nothing special, except you may need to adjust your flow rates to make it a snap fit, both of worked well.
Update Ver 3 is updated 20250225 - Better fit Chromecast remote rear cover :) Print slow and fine for best result. Please comment the model :)
Simple design, super-snug fit. If you have access to multicolor printing, then add filament swap after first layer which is at 0.2mm. Meant to be printed at 0.2mm layer height with up to 0.6mm layer width. 14.09.2025 - added version with…
Print with 3 walls. No brim required usually. f360 file included.
Chrome dino. Easily printable without supports if the dino and cacti are laying flat on the buildplate. If anyone has any questions please contact me, THop3D
A holder for a Chromecast with Google TV. To keep the stress from a dangling device on a HDMI cable Use double sided tape to attach it to the back of your TV Prusa PLA Might use some supports on the inner curve / overhang
Ist aus dem spiel was sie auf Chrom offline spielen können.
I printed this with 20% grid infill without support.
v2 has 2mm shell as v1 had trouble printing due to overhang
Tired of losing your Chromecast TV remote between the cushions? Well this is the STL for you!
We couldn't find a 3D-printable Chrome Dino to our satisfaction - so we decided to make our own! This is an easy beginner print. It could serve as a mini desk decoration, or maybe you could slap a magnet on its back - voila! Fridge…
Aside of running in the chrome browser waiting for the rebooting modem, the pixelated dino can now run on the kitchen tabletop as well.
Quick prototype for a 110 film holder to elevate the film when scanning with a DSLR. Model parts should snap into place. Tested on a Prusa Mini using 0.15mm nozzle under SPEED settings in Prusa Slicer with a 20% infill If you want this…
Replaced the base with a 1x1 gridfinity base so it can have a nice spot on my desk!
Pretty self explanatory. no supports required 0.2mm layer height 0.4mm nozzle 20% infill PLA
Filled in the bottom, chamfered the bottom edge so it's a bit more ergonomic.
Google Chromecast Remote Holder for Screw or double sided Tape
Chromecast remote control holder, wall mount
This is a remix of the Google Chromecast TV Remote Push-Click mount by Byteslinger. I added a crossbeam to the main holder because the arm mechanism would pop up and out of place under the stress of the springs. The crossbeam holds the…
Chromebooks are used in many school districts across the United States. A keyguard can make a Chromebook more accessible for individuals with motor disabilities. Each Chromebook will have a slightly different keyboard layout. This…
V2 - Oct/23/23 - Removed the other holes and hex protrusions. I liked the original control holder but didn't want to have to screw in the remote in place. So, I added the HSW insert on the back. I'm not very good with editing STLs so it…
Your focus need some polite swag to be a real gentleman (sorry for the really bad print color)
This is yet another laptop stand and looks like a lot of the others you can find on Thingiverse. With my daughter's school being online-only due to COVID-19 I am trying to set up her desk with ergonomics in mind. It's terrible to be…
Keycap originally designed for the razor blackwidow
Chromebooks are used in many school districts across the United States. A keyguard can make a Chromebook more accessible for individuals with motor disabilities. Each Chromebook will have a slightly different keyboard layout. This…
My 8yld child has decided that taking the backs off remotes and putting them back on is satisfying which means that backs to remotes are missing. I found another remote back on here for this remote, but it did not fit well so I made a new…
This is just a simple model. I printed 0.2mm layers heights. There are holes for 6 x 2mm round magnets. Flip on flat side before printing. 2 or 3 shell layers, 10% grid infill. This should be an easy print. I used black filament. There…
Print this piece to show your excitement for the Olympics in Paris! Also check out my full color display piece: Olympic Rings PARIS 2024
Info This is a remix of Cool Junk s case It "fixes" so the button are less annoyingly hard to press (especially the power and source buttons) Since no source file was provided I did it using booleans in blender, so if you want to further…
I designed this bracket because the Chromecast-Audio needed a fixed place near the stereo. The hole on the top has a 10mm diameter, so a standard audio plug should fit in. The plug for the power supply isn't covered by the bracket. One…
Box to organize the Chromecast including the cable, charger, remote controll and 2 AAA batteries. It can be closed with a slidable cover. Pictures a V1, V1.1 has some updates for better usability. Box um das Chromecast sowie das Kabel,…
This is a simple design of a keychain shaped like the Super Star from Super Mario Bros. my first versione and it is monochrome, soon I will release the multicolored version, but once printed, this simple model is beautiful. If you support…
This is wall mount for HY300 projector that enables mounting of additional cables behind it. theres also additional slot for chromecast dongle. If you are not able to set the correct angle on the projector there is also option to print…
This is a set of replacement frames for avaitor-style red-cyan 3d glasses, marked ‘anachrome.com’ on the side. I could not use the stock frames over my glasses, so I modeled these after a couple of other oversized frames that I had. A…
Designed as a flat storage option for Kinchrome (possibly other brands too, but untested) circular pliers. This can be quite difficult to organise because of the irregular geometry, large handle span, and replaceable tool heads. Printed…
This is a clean looking laptop stand. The original model from Nemesis was 25 mm passage thickness, mine is 20 mm passage thickness. My chromebook was 20mm thick, so i remodeled it so it fitsmy chromebook. You dont need supports .
NOTE: If you like our designs, please consider supporting our work by joining our Patreon channel—your support helps us keep creating and growing our community! This is a set of pieces that can be used to recreate the Imperial…
The original file found at https://www.thingiverse.com/thing:2952775 has a rather obnxious tag on it. I removed it with Meshmixer and am now hosting it here for all to enjoy. Print instructions Category: 3D Printing Summary The original…
Mount your chromebox at the back of your monitor. Print two times and enjoy!!!
This is a headlight ring nut/clip/clamp/mount or whatever for a Jeep TJ Wrangler the ones on my TJ were stripped out and they would no longer hold the beauty/vanity chrome ring that goes around the headlight any more. I sorta copied…
The remote is lazy.
The Idea: https://trex-runner.com/ as another activity without internet, it just seemed fitting :D I selected 6 cacti 3 tall, 3 small and the two birds to make a modular kit Design Process: I traced the original images from the game…
I work for a K12 school as a computer tech and the original hinge covers get lost all the time because of the backplate breaking off the hinge. The parts supplier we use wants $20 for a pair of replacements. So I modeled and printed some…
Remote case for the Google TV Streamer 4K As with the original model, after printing add a dab of hot glue to the bottom center, and a dot on the side. Before the hot glue cools, put your remote in to mold the hot glue against it. This…
I am using this remote holder to mount it to a wooden cupboard. Print settings No supports, print in an upright position PLA 30% infill 2 walls
I created this model while making a holder for the Google TV Remote. The dimensions are accurate but the curvature on the bottom of the remote doesn't exactly match the real version. I simplified by using circular profile, the real remote…
Simple wall mount for the Chromecast Audio with a single mounting screw hole. Comes in two parts: the lid twists onto the base. Printed in PLA, 20% Infill and no supports.
This is a travel box for Radlands Super Deluxe Edition with the Cult of Chrome expansion (synth cards only). I printed the base and lid with a 0.6mm nozzle at 0.3mm layer height. Not made to fit non-synth cards (sleeved or unsleeved). I…
A 10-inch rack mount for the Asus Chromebox CN62. Add this mini PC to your homelab with ease! If you wish to know how to remove Chrome OS on this device, please follow the steps here: https://docs.mrchromebox.tech/ I've included two…
Klasicky kam s ním…..tedy s dálkovým ovladačem. Toto je držák k přišroubování, případně přilepení třeba na nohu konferenčního stolku. Lze použít také suchý zip, nebo oboustranku.
Stand for the chromecast remote and also for the remote of an old Hitachi Beamer. There's also a small compartement for a pen or something similiar. My Print Instructions/Settings 0.25mm Draft Setting for PrusaMINI in PrusaSlicer (But…
![Chrome Dino Pendant [Collections]](https://media.printables.com/media/prints/667415/images/5373379_f86210ab-56ce-4a56-a294-60e95ac2ee2d_ccd61554-2290-4843-a3e1-1d48a3527c75/plusdinos.jpg)
