Counting matching models…
This VR wearing, fire flinging, ear breaking acquisition machine is ready to ruin your day. This particular one clings to some rusted out support while pointing out your inadequacies as a hunter; best to take it out quickly before it…
update 2025.0706 added more sizes: DN32 DN40 DN50 DN75 DN90 DN110 made cable tie holes 100% FDM compatible made FreeCAD file more parametric in use (corrugated tubes are very very hard to use with 6mm² wires, HT pipe is much easier and…
I remixe the clamp because for PLA the hole is to lite
I needed a simple way to lay my power cables in my small workshop. The cable clamp can either be screwed or the clamp can be glued. I used a 3.5mm screw
Cable clamb diameter 10 mm
Description of filenames: example: bar_16mm_pipe_12mm: can be attached to connectors for round bars with a diameter of 16mm. The clip is designed for a pipe with diameter 12mm.
All parts can be printed with PETG and min. 25% infill (because of stiffness reasons). I recommend TPU with 100% infill for star wheel washer. Use a standard ferrule to fix lacing pony on table or workbench. To assemble lacing pony you…
Also requires 6 M3 nuts (hexagonal, 2mm high, 5mm wide) and 6 M3 screws (12mm long). The clamp can be fixed either by 2 cable ties (the black ones) or by screwing the lower plate tight. The cable is held in place by 3 cable ties (the…
On the Thule VeloSpace XT , there is an unusual hex bolt that needs to be tightened on the bike carrier frame where the bikes are secured. This design makes folding the rack somewhat inconvenient. Often, I find myself attempting to store…
Also see: https://www.printables.com/model/1888809-baader-clamb-knob-stronghold-pan-eq Baader delivers a 3D tool for the PAN clambs and stronghold:…
Also see: https://www.printables.com/model/977528-baader-knob-stronghold-clamb-for-pan-eq-prism Baaders knobs are not easy to tighten, especially at night, with cold fingers. To apply more force and make handling. To apply even more force…
A holder for the PTFE tube at the hotend mount of my Hypercube Evolution. It self-aligns with the screwhole on the blower. Print Settings Printer: Hypercube Evolution Rafts: No Supports: No Resolution: 0.15 Infill: 15% Filament: extrudr…
PVC pipe clamp, for 2, 3 and 4 pipes. I made these for a climbing frame for plants. It is also possible to use this clamp to mount the tube against a fence or wall. Just add 5 screws.
